Nissan 370Z Forum
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   RPF1's???? (http://www.the370z.com/wheels-tires/52107-rpf1s.html)

Alchemy 03-30-2012 07:00 AM
Quote:
Originally Posted by cavemancan (Post 1628788)
I had the F14's on the Rx8...I just hate the way they look on the Z. Does not flow well in my opinion.

But on the Rx8...Whoa mama...

http://i786.photobucket.com/albums/y...4/IMG_0827.jpg
Doesnt flow well :icon14: I, as well as MANY forum members believe its one of the nicest wheels on a 370. It flows way better on the Z that that rx8, IMO.

http://i98.photobucket.com/albums/l265/avryan/img1.jpg

http://i98.photobucket.com/albums/l2...1308522113.jpg

FuszNissan 03-30-2012 07:17 AM
Here are my 18" RPF1's. Sorry for the shitty cell phone pic

http://farm7.staticflickr.com/6236/6...10afc1b8_b.jpg

Alchemy 03-30-2012 07:25 AM
Quote:
Originally Posted by Huck (Post 1629440)
I could be wrong but I thought I saw some about a concave version somewhere here on the forums. Lots deeper wells for the back.


Sent from my iPizzle using magic and new fangled science stuff.
This??
http://www.the370z.com/parts-sale-pr...las-vegas.html

cavemancan 03-30-2012 11:04 AM
Quote:
Originally Posted by Alchemy (Post 1629668)

Those look alot better...wonder how they would look on the 370...hmmm

BTW...In order to get concave on the Forgestars they have to be 10 inch wide or more.

cavemancan 03-30-2012 11:18 AM
Quote:
Originally Posted by FuszNissan (Post 1629663)
Here are my 18" RPF1's. Sorry for the shitty cell phone pic

Size? Offset?

NA&CH 03-30-2012 11:36 AM
Quote:
Originally Posted by cavemancan (Post 1630182)
Size? Offset?
prob 18x9.5 +15 f and 18x10.5 +15 rear. Doesnt look bad a taller tire and moar drop needed though.

Chris

Alchemy 03-30-2012 12:02 PM
Quote:
Originally Posted by cavemancan (Post 1630154)
Those look alot better...wonder how they would look on the 370...hmmm

BTW...In order to get concave on the Forgestars they have to be 10 inch wide or more.
Correct. I like it that way. I have a staggered setup w much less concave in front than the rear, the way a RWD should be.

corbin09 03-30-2012 12:53 PM
What size and offset are those rpf1s? The ones I test fitted hit the brake.

Megan370z 03-30-2012 09:00 PM
Quote:
Originally Posted by FuszNissan (Post 1629663)
Here are my 18" RPF1's. Sorry for the shitty cell phone pic

http://farm7.staticflickr.com/6236/6...10afc1b8_b.jpg
Quote:
Originally Posted by cavemancan (Post 1630182)
Size? Offset?
yup im quite interessted to know !
I just wonder if they would fit the AP Racing bbk

Megan370z 03-30-2012 09:48 PM
Quote:
Originally Posted by corbin09 (Post 1630443)
What size and offset are those rpf1s? The ones I test fitted hit the brake.
yeah the 10'' +38 doesnt fit my BBK on the front.

cavemancan 03-31-2012 08:12 AM
Quote:
Originally Posted by Alchemy (Post 1630305)
...the way a RWD should be.
Opinions vary ;)

FuszNissan 03-31-2012 08:24 AM
Offsets:
18x9.5 +18 (+38 with 20mm spacer and extended studs)
18x10.5 + 15

I'm lowered about an 1" front and rear. If I went any lower my exhaust would scrap.

cavemancan 03-31-2012 11:40 AM
Quote:
Originally Posted by FuszNissan (Post 1631891)
Offsets:
18x9.5 +18 (+38 with 20mm spacer and extended studs)
18x10.5 + 15

I'm lowered about an 1" front and rear. If I went any lower my exhaust would scrap.
I assume the spacers are a must regardless of the offset?

P.S. Rep'd! Thanks for the info!


All times are GMT -5. The time now is 09:49 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2