18's on a 370z

littlejuanito

Looks good

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp

ChaseZ

Dig the 18's and sticking with them when I get new rims too. Next time some 325/35R18 out back though. Meaty tires ftw!

dvboy

That looks great,maybe I mis-understood you,but I don't think you will get 325/35r 18's to fit on the stock wheels.

__________________
Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

TN.Z

Yeah I don't see why you would put anything bigger than 285s on the stock wheels. Even that's pushing it IMO

Fairlady_Zeto

First off sorry for the rant...so im having issues finding the right setup.. I posted a while back with my current setup (Base 18's rear squared with 25mm rear spacer) so my front offset is the stock 18x9 +15 at my original height i was lowered to on my bc coils i rubbed all the time every driveway, over deep bumps etc. Front tires are the stock 225/50. I didnt have time to go in and raise it up as i have no access to a garage anymore so i just had the fenders rolled which fixed the issue. I have since raised it up and dont rub or scrap on anything anymore thankfully..
The issue im having though is that no matching wheel setups have the offsets im looking for, everything seems to be too wide in the front and not wide enough in the rear. I personally dont like the fronts to stick out pass where the rears would so to prevent that i would need a front setup of 9.5 +20 to +25 and a rear of 10.5 +5 to +10 (Currently at 18x9 -10) a +12 would be the minimum I would run. Theres no way i could run the popular 18x9.5 +15 in the fronts without having issues if i was already having issues with an 18x9 on narrow tires and 18x10.5 +15 is just shy of being wide enough to look right with that front setup anyway and yet it seems every non custom staggered setup is this or really close to this.. My dream setup would be 18x9.5 +22 front and 18x10.5 +10 rear, WITHOUT Spacers which apparently doesnt exist anywhere. Please Correct me if im wrong or missing something or if im the only one that feels this way, just looking for suggestions or alternatives that might be close or anything at this point ive searched for hours now between two days and have nothing to show for it.

OptionZero

Contact Tom @ SpeedImageUSA
https://www.yelp.com/biz/speed-image-usa-fremont-2

He is local to you, and is the largest Rays Wheels retailer in Norcal, maybe all of california judging from the pallets of te37's he gets on a weekly basis.

This dude stocks a ton of stuff and can get you anything from Rays/SSR/Works/other brands

I am fairly certain, for example, that Rays Gram Lights variants come in 18s and close to those sizes
Example of Gram Lights 57DR: https://www.rayswheels.co.jp/product...=en&wheel=57DR
Comes in 18x9.5 +22 and 18x10.5 +12, basically right what you wanted

tell him Jon sent you!

jchammond

are you tracking your car, Fairlady_Zeto? Or just wanting the square setup?
Camber plays a huge role in selecting the proper offset wheels/ pending the occasion.
As for me (mostly straight line acceleration) I choose to run minimal negative camber-so a 18x9+15 would poke almost 1/2" on my Z...also,the stagger built in these cars would require a 25mm spacer on rear to sit in the same relationship to fender as front.
A lot of variables.
Go to [official 370z wheel fitment guide] pics specs only & take a peek at what other members are running & their camber setups.
Hope this helps.

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

jchammond

Also Jason Tung @Getyourwheels is very knowledgeable & sells a variety of different ones.

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

Fairlady_Zeto

I really appreciate the contact im relatively new to the area and dont know any shops out here yet so that helps alot.. Yeah those seem to be the only wheels I can find, other than TE37's which im trying to avoid just on the fact that it seems every z is running these or F14's lol No disrespect great wheels just wanna try something different.

Fairlady_Zeto

Im only running the square setup to rid myself of the terrible offset and width of the factory base front wheels lol I do plan on eventually tracking my car once i get a few more supporting mods (oil cooler) which is why im trying to get the right offsets so i dont need to run spacers. Yeah ive got my camber down for the most part so its both function and form.. Yeah ive looked through every page of that thread already and got some good info just not exactly what i was looking for and most of them dont say if they rub or not or have enough info.. Also thank you for the contact as well i appreciate the help

carlitos_370z

Well Im let's see if this help haha! My last set of wheels was the Gram Lights 57DR. Best wheels I have installed on my soo far and Im planing on buy the again or move to the new Gram Lights 57CR. Anyway... the specs that of my Gram Lights 57DR was 18x9.5+12 & 18x10.5+22 (the offset arrive in +22 by a mistake) with 20mm spacers on rear. The front sit perfect with the 255/40/18 tires that I have up front... of course you have to give some camber, but nothing crazy... I have the Oem camber arms, etc. never rub on the fender or liners... they work perfect with the correct alignment. On the rear works perfect to... I use the 20mm spacers on the rear to make them flush with the Z body. The offset of the rear wheels suppose to be +12 too like the front. The specs of my rear tires was 285/35/18. I hope that helps something If you have any questions about my Gram Lights setup let me know... Those wheels are soo great that if I keep my Z, im going to buy them again hahhaa!

OptionZero

Call Tom anyways. I was just giving an example of a wheel that fits. He can hook you up with another design if you walk to him

KamiSpeed

Volk Racing makes the new CE28SL in 18x9.5 +22 / 18x10.5 +15. 3mm isnt that big of a difference honestly. You can go 57DR or 57CR as well. But the CE28SL will be much lighter.

Also not many people run CE28s on 370Zs. Will be something different

__________________

ChaseZ

Won't be on stock wheels

abm89

I think i'll end up getting a set of CE28N/SL whenever I give up tracking my vehicle. I love that style.

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build