11-29-2015, 08:35 PM
|
#1 (permalink)
|
|
A True Z Fanatic
Join Date: Sep 2014
Location: Memphis Area
Posts: 3,118
Drives: '09 MB
Rep Power: 124434
|
Quote:
Originally Posted by EzDz
Just took these today hope they help. For flush i would consider 19s. I have swift springs and its 19x 9 et 10 upfront and 19x10.5 et 10 in back, im knocking the backs out 5mm. I also have sport comp 2 tires and they have a really wide tread width those are only 245 and 285. Camber is 1.4 front 1.6 rear
If you do want 18s for flush on swifts you can run some offsets close to 10, I also think 18s you could run some tire poke and be okay. Hope this helps!
|
Beautiful NISMO, EzDz. Really appreciate you posting that pic, as it really shows how your wheels are set up. I've considered 19s, but I'm good with the 18s and, in general, the tires are less expensive. Thanks for the feedback and information!
Quote:
Originally Posted by josemartinrea
If you run on stock tire width you will be stretching. I've got 9.5 front and 10.5 rear on 18s. Just something to look out for.
|
I'll be stepping up in tire size from 225s to 245s in the front and from 245s to 275s in the back. I'm hoping that the 275s are wide enough for the 10.5 rear wheels, as I don't want the tire stretched. I've looked at a few tire calculators and think it will work pretty well, but thanks for your post and for the insight. Much appreciated.
Quote:
Originally Posted by TN.Z
That offset front wheel will extend out 27mm more than base wheels and the rear wheels at +15 would extend outwards 19 mm more than base rear wheels. You might have a tiny amount of poke up front but it should be pretty flush. The rears shouldn't poke at all.
Used the offset calculator at 1010 tires to figure this out. If you have base wheels just take a tape measure out and see where your wheels would be if they stuck out an extra 27mm and do the same for the rear. If you have a sport then ignore this post.
|
Thanks, TN.Z. I'm running base 18" wheels, so the numbers you shared are extremely helpful in my decision. I just measured and, if a +35 offset in the front on a 9.5" wheel sticks out an extra 27mm, this will look great. The rears will look great with an extra 19mm too. From one Tennessean to another, thanks!
Last edited by Memphis370Z; 11-29-2015 at 09:00 PM.
|
|
|
Similar Threads
833Likes
Hybrid Mode
