Cool, where did you buy the Enkei's from?

Hubcentric spacers for the hub with hubcentric rings on the spacer to fit the wheel bore is the ideal method. That's what I did with mine. The hub rings are so cheap that they are worth it in every scenario. The hubcentric spacers are more expensive though. Still a good peace of mind.

Online, just searched forever.

Ahh never knew that. Ok so rotor is 65.9ish but doesn't matter because ill be buying spacers made for my car so I know they'll fit. Eibach for example says the bore is 66.10 ID. Obviously they will fit with a 0.2mm difference. But what's the outside bore that fits into the wheel? Would that be back down to 65.9 like the rotor? I found rings 66.05mm ID, 73mm OD. Seems to close since the wheel is 73mm.

Hubcentric spacers will have basically the same bore lip as the vehicle. A hubcentric spacer of 66.1mm will have a 66.1mm bore kn the outer side also. I was running 15mm hubcentric spacers on the front. Then had hubcentric rings on the spacers. I no longer have the spacers on the vehicle but the hubcentric rings still fit perfect on my hub and wheels.

18's on a 370z
 

Finally the "shoes" have arrived!
http://img.tapatalk.com/d/13/08/21/py9e6e5u.jpg
http://img.tapatalk.com/d/13/08/21/e9a8eqan.jpg
http://img.tapatalk.com/d/13/08/21/my4atene.jpg

Rice rice baby
Ops i meant ice ice baby

^huh? can't tell if you're being sarcastic or not.
TE37rt is not rice.
Can't wait to see those mounted. :tup:

18's on a 370z
 

Still have one more day to go, But i miss her so much already omg.....
http://img.tapatalk.com/d/13/08/23/equpytuj.jpg

^my only wish is that they come out in size 19s already...

:icon18: this guy is just jealous lol

what size/tires did you go with? And also do you have more pics? I want to see clearance up front. Any spacers?

thanks

Front 18x10 offset+29 with Toyo R888 275/35/18; Rear 18x10.5 offset+18 with 305/35/18
http://img.tapatalk.com/d/13/08/24/umytujap.jpg
http://img.tapatalk.com/d/13/08/24/eqagy6u4.jpg
http://img.tapatalk.com/d/13/08/24/ema6egyr.jpg
http://img.tapatalk.com/d/13/08/24/a7e5e8yq.jpg

BUMP! Anyone running these bad boys yet from Work? The MCO type CS. I'm definitely Interested in these...They also offer quite a few choices for sizes that would fit our cars, with "medium" and "deep" wheel face options
http://www.workwheelsusa.com/media/g.../1046_full.jpg

^^Sooooo I have my set of Work MCO racing type CS wheels. 18x10.5 all around. +20 up front +12 rear. 285/35r18 RS3's. Stock suspension for now. Mexiflush up front by maybe an inch. No rub. Rears fit perfect. Coilovers and SPL camber arms are next up on the mod list.:excited:

https://scontent-b-sjc.xx.fbcdn.net/...c9&oe=5502953F

Here are my 18" Enkei PF01's 18x9.5" +35 front and 18x10.5" +15 rear with Toyo R888 275/40r18 tires.

http://i1091.photobucket.com/albums/...psa5dbce27.jpg

nice dude!!! im looking for some 18" wheels to trade for mines but dont find nothing soo i think that im going to save some $$ after finish some mods and buy a set of 18":stirthepot:

I want to drop down from 19s to 18s on my car, but have the sports package on swift springs. Will 18s fit over the brakes and will it lower my car?

depending on wheel design then you wont have a problem, pf01, nt03, te37's etc or similar concave will fit fine over the brakes

http://i49.photobucket.com/albums/f2...x/DSC_1922.jpg
http://i49.photobucket.com/albums/f2...xxx/wheels.jpg

TC105N 18x9.5 +35/ 18x10.5 +12
Fronts 17lbs, rears 18lbs.

:drool: dude love how look your Z damn!!!! :tup: nice work

http://tapatalk.imageshack.com/v2/14...7e24db0355.jpghttp://tapatalk.imageshack.com/v2/14...21e677b10d.jpghttp://tapatalk.imageshack.com/v2/14...da51f9dc89.jpghttp://tapatalk.imageshack.com/v2/14...cc279a2e4b.jpg
Te37sl
18x9.5 265/40 +22
18x11 305/35 +15

On swift springs


Sent from my iPhone using Tapatalk

looks great dude! :tup:

Hey i'm looking into an 18x10.5 rim for my rears. What will an offset of 27mm do in terms of looks? I'm trying to avoid using spacers. I'm looking for a meaty look similar to CCastro's Z back in the second page. I'm lowered on Swift springs.

It will be a little bit sunken in the well.


Sent from my iPhone using Tapatalk

daaaangit. I'm trying to get some apex arc-8s. ~$1200 for 18s under 21lbs seems like I steal. I just hope they take custom orders. What would be a good offset as to where I have a maybe a finger's worth of gap between the tire and the wheel well?

Rpf1 are 19. $345 each for rear 10.5 +15

RPF1s are awesome, there's a reason they sell so well and are on 1/2 the cars at any given track day.

Are you talking about the gap outwards or the gap from the top of the tire to the wheel well (for which aspect ratio will matter, not offset)

Outwards gap. Scott@synergy's gap looks fine. Would +12 look okay as well? I think I have the ratio covered. I'm running a tall tire and a swift spring drop.

Gaps gonna depend on camber too. Mines -1.5. Zero would close the gap a lot.

If your're interested im selling my 17.4lbs fronts! If you buy rears like I said you'd only be at less than $1200 for a way lighter wheel.

Hmm. I'm still in the process of deciding which wheels I want to get. But I will def PM you if I decide on the rpf1s! Does curb rash come free with them? Haha

Oh wait they're 19s. I'm looking for 18s. Cheaper tires and more variety. Sorry! BUT. I do know someone looking to put light 19s on his 350z. I'll def let him know.

Was this for me? I have 18's

Can someone make a recommendation for me? I'm getting the Forgestar F14 18x9.5 front and 18x10 rear. What offsets should I order for a *close* to flush fit (not exactly flush, but just close to it). I'm planning on running 255 40 18 fronts and 285 35 18 rears. If I stay with the stock 9" width for the front wheels, the 255 should still not be a problem, right? I cant decide b/t going up 1/2" to 9.5" or just staying at 9". Let me know what you guys think...

Well my friend!!! i dont have 18"wheels but basing on my wheels set up I have 19x9.5+12 front and 19x11+15 rear... love how it looks the car with those offset... and if im not wrong the same wheels that i have but in 18" comes with the same offset 18x9.5+12 and 18x10.5+15... looks flush and really good in my opinion....

BTW my rear tires are 285/35/19 and works with 0 issues...

I hope someday to buy some 18" :tup:

Thanks. Do you have pics of your car? I'm sure the wider tires would fit both front and rear. My question was should I got up to 9.5" in the fronts for the wheel width or stay with 9". Any advantages/ disadvantages? The one small disadvantage is that the 9.5 weighs half a lb. more per wheel than the 9". But there should be less sidewall flex under load for 9.5"? Cant decide...

sure!! here are some pics of my Z

https://farm9.staticflickr.com/8611/...ec38bdf2_c.jpgimage (4) by carlitos_370z, on Flickr

https://farm8.staticflickr.com/7462/...23ebefff_c.jpgUntitled by carlitos_370z, on Flickr

clooser look to the front wheel
https://farm6.staticflickr.com/5609/...d9c3c3d785.jpgUntitled by carlitos_370z, on Flickr

I think im going on 18"soon :stirthepot:

Go 9.5+. I was and now I'm 10.5. I run a 285 and one day I'll even go bigger. I've got some 17.4lbs 9.5's if interested. The car can handle a lot up there so don't down play it only to be disappointed down the road. 255's to small, just run square in the tires and try to run square for the wheels.

im thinking to get the 245/45/18 and for the rear 275/40/18

those size are good?

other size that i like is the 255/45/18 & 285/40/18