Originally Posted by KamiSpeed (Post 3600729)

Volk Racing makes the new CE28SL in 18x9.5 +22 / 18x10.5 +15. 3mm isnt that big of a difference honestly. You can go 57DR or 57CR as well. But the CE28SL will be much lighter.

Also not many people run CE28s on 370Zs. Will be something different ;)

https://c5.staticflickr.com/1/733/31...b99cb1cc_z.jpg

Originally Posted by carlitos_370z (Post 3600679)

Well Im let's see if this help haha! My last set of wheels was the Gram Lights 57DR. Best wheels I have installed on my soo far and Im planing on buy the again or move to the new Gram Lights 57CR. Anyway... the specs that of my Gram Lights 57DR was 18x9.5+12 & 18x10.5+22 (the offset arrive in +22 by a mistake) with 20mm spacers on rear. The front sit perfect with the 255/40/18 tires that I have up front... of course you have to give some camber, but nothing crazy... I have the Oem camber arms, etc. never rub on the fender or liners... they work perfect with the correct alignment. On the rear works perfect to... I use the 20mm spacers on the rear to make them flush with the Z body. The offset of the rear wheels suppose to be +12 too like the front. The specs of my rear tires was 285/35/18. I hope that helps something :tup: If you have any questions about my Gram Lights setup let me know... Those wheels are soo great that if I keep my Z, im going to buy them again hahhaa!:p

Originally Posted by KamiSpeed (Post 3600729)

Volk Racing makes the new CE28SL in 18x9.5 +22 / 18x10.5 +15. 3mm isnt that big of a difference honestly. You can go 57DR or 57CR as well. But the CE28SL will be much lighter.

Also not many people run CE28s on 370Zs. Will be something different ;)

https://c5.staticflickr.com/1/733/31...b99cb1cc_z.jpg

Originally Posted by Fairlady_Zeto (Post 3601153)

Thats good to know.. And that did help a bit i appreciate your info ive been lurking on your build and setup it looks dope :tup: I dont think I would be able to run that wide in the front with my height but its good to know with proper adjustment and tires i can.

Originally Posted by Fairlady_Zeto (Post 3600372)

First off sorry for the rant...so im having issues finding the right setup.. I posted a while back with my current setup (Base 18's rear squared with 25mm rear spacer) so my front offset is the stock 18x9 +15 at my original height i was lowered to on my bc coils i rubbed all the time every driveway, over deep bumps etc. Front tires are the stock 225/50. I didnt have time to go in and raise it up as i have no access to a garage anymore so i just had the fenders rolled which fixed the issue. I have since raised it up and dont rub or scrap on anything anymore thankfully:tup:..
The issue im having though is that no matching wheel setups have the offsets im looking for, everything seems to be too wide in the front and not wide enough in the rear. I personally dont like the fronts to stick out pass where the rears would so to prevent that i would need a front setup of 9.5 +20 to +25 and a rear of 10.5 +5 to +10 (Currently at 18x9 -10) a +12 would be the minimum I would run. Theres no way i could run the popular 18x9.5 +15 in the fronts without having issues if i was already having issues with an 18x9 on narrow tires and 18x10.5 +15 is just shy of being wide enough to look right with that front setup anyway and yet it seems every non custom staggered setup is this or really close to this.. My dream setup would be 18x9.5 +22 front and 18x10.5 +10 rear, WITHOUT Spacers which apparently doesnt exist anywhere. Please Correct me if im wrong or missing something or if im the only one that feels this way, just looking for suggestions or alternatives that might be close or anything at this point ive searched for hours now between two days and have nothing to show for it.

Originally Posted by jchammond (Post 3600384)

Also Jason Tung @Getyourwheels is very knowledgeable & sells a variety of different ones.

Originally Posted by SFARGO (Post 3602319)

just curious how many of you guys are running stock ride heights. I don't want to lower my car but don't want a lot of empty wheel well space so what size wheels with a stock height

Originally Posted by SFARGO (Post 3602319)

just curious how many of you guys are running stock ride heights. I don't want to lower my car but don't want a lot of empty wheel well space so what size wheels with a stock height

Originally Posted by Gregor12 (Post 3610733)

must.. post.. moarrrr im worried to worry the wheels im looking at because of Sport Brake Clearance

Originally Posted by carlitos_370z (Post 3610809)

what wheels are you looking for?

Originally Posted by Gregor12 (Post 3610957)

honestly, Whatever fits over the brakes without poking a lot or having to run spacers. I like the avante garde's that were posted a few pages back but that was a long time ago. I want to run a fat tire in the rear for straight line traction so im thinking about just going with the Enkei RPF1. 19x9.5 +22 in the front and then 17x10 in the rear with a street slick. but if i can find a nice set of staggered 18s that fit good without spacers I would like to go that route.

every set im looking at i try and search on google for an G or Z that has akebonos to see if they clear but there isnt much.

ive been considering all lightweight enkeis, rotary forged TSW's, ssr's, and a few work emotions.