![]() |
Quote:
BC Racing Coilovers - Currently set too low now with the 18s, so ill be raising it .25 inches F and R Alignment - All in spec except for the fronts (-2.0 deg of camber). These settings will change after I make changes to the ride height. |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
No, it doesn't rub at all. My wheels are 18x10 +35 / 18x10 +25 at the suggestion on the guy I ordered them from. The fronts were perfect but he blew the back ones, I have 20mm spacers on them in the picture.
Sent from my iPhone using Tapatalk |
Quote:
|
You will have to have the camber for them not to stick out at the top.
Sent from my iPhone using Tapatalk |
TBH I'm horrible with this fitment thing.
Looking at some Cosmis Racing wheel Xt-006r 18×9.5 +10mm 5×114.3 18×11 +8mm 5×114.3 I want to run a beefy set up on tires. Would I have to do any fender work to make this work with these specs? |
+10 on front is gonna require some fender rolling and possibly pulling even with stretched tires with a decent amount of camber. 18x9.5 +35 and I was able to run 285/35 tires on front with no rolling, or pulling the fenders. but I was running -2.8 camber for autocross.
|
Quote:
|
Gtkiller, no rubbing at all
|
my current setup is 245/40 front and 275/35 rear on the 18's. It would look a lot better with some springs but the handling and the acceleration are beyond better than stock...could have gone with the 285 but i didn't had time to buy them. Looking to buy cosmis wheels lol
|
Quote:
|
Quote:
|
All times are GMT -5. The time now is 08:13 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2