Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   370z MEATY TIRE THREAD (http://www.the370z.com/wheels-tires/50731-370z-meaty-tire-thread.html)

Zipper1 05-18-2015 09:12 AM

Quote:

Originally Posted by VinceThe1 (Post 3200836)
Why not just move the rear 285s upfront? Saves money and 285/35R19s are perfect in outside diameter. :tup:

I would do as suggested, im just not sure i could lower the car with that size up front. I have yet to see this done
with a drop. Anyone?

RBfastback 05-18-2015 09:46 AM

370z MEATY TIRE THREAD
 
I may be looking too far into this but maybe someone can enlighten me.
For rear Nismo wheels changing the stock 285/35/19 over to a 305 everyone says to go with 305/30/19 but that doesn't make sense if ur doing it for traction because u may gain about .79 inch wider but your loosing overall diameter -2.04 inch or -2.4% circum. so it's a wash from what I gained going wider.
but 305/35/19 u gain .79 wide and gain 1.73 inch or 2.1% circum. and that's less of a difference or change then oem size so your speedo would technically be more accurate with the 305/35/19 even tho it's a small difference but that means slightly more meat.http://images.tapatalk-cdn.com/15/05...131996b4e4.jpghttp://images.tapatalk-cdn.com/15/05...94e4a65a29.jpg

all the percentages are less of a change for 35 series tires

FPenvy 05-18-2015 09:54 AM

Quote:

Originally Posted by RBfastback (Post 3201085)
I may be looking too far into this but maybe someone can enlighten me.
For rear Nismo wheels changing the stock 285/35/19 over to a 305 everyone says to go with 305/30/19 but that doesn't make sense if ur doing it for traction because u may gain about .79 inch wider but your loosing overall diameter -2.04 inch or -2.4% circum. so it's a wash from what I gained going wider.
but 305/35/19 u gain .79 wide and gain 1.73 inch or 2.1% circum. and that's less of a difference or change then oem size so your speedo would technically be more accurate with the 305/35/19 even tho it's a small difference but that means slightly more meat.
( Click to show/hide )


all the percentages are less of a change for 35 series tires

go look up 305/35/19 on tirerack and tell me what you find.

:bowrofl:

RBfastback 05-18-2015 09:55 AM

Quote:

Originally Posted by fpenvy (Post 3201092)
go look up 305/35/19 on tirerack and tell me what you find.



:bowrofl:


damn...

FPenvy 05-18-2015 09:57 AM

Quote:

Originally Posted by RBfastback (Post 3201095)
damn...

make sense why everyone is running 305/30? lol

if diameter measurements are your concerns then run 265/305 the diameters are identical 26.3 in RE-11's.

RBfastback 05-18-2015 10:40 AM

370z MEATY TIRE THREAD
 
diameters aren't really my goal, it's for now while I have stock wheels I'm looking for the most traction possible for the rear for when I f.i. my z.
idk where I was reading it about going from 285/35/19 to 305/30/19 isn't as much grip (in a strait line) as u think because of the loss of circumference. obviously when cornering it's better.
only options I can find on the calculator are 295/35 but that's such a minuscule difference and there more expensive or 325/30 and those look like they would be amazing but I don't think it will work in the 10.5 rear nismo wheels...
any thoughts aside from new wheels cuz that won't be for awhile.

I plan on using PSS tires

FPenvy 05-18-2015 10:42 AM

Quote:

Originally Posted by RBfastback (Post 3201154)
diameters aren't really my goal, it's for now while I have stock wheels I'm looking for the most traction possible for the rear for when I f.i. my z.
idk where I was reading it about going from 285/35/19 to 305/30/19 isn't as much grip (in a strait line) as u think because of the loss of circumference. obviously when cornering it's better.
only options I can find on the calculator are 295/35 but that's such a minuscule difference and there more expensive or 325/30 and those look like they would be amazing but I don't think it will work in the 10.5 rear nismo wheels...
any thoughts aside from new wheels cuz that won't be for awhile.

I plan on using PSS tires

pretty sure 315s work on nismo wheels. maybe 325 at most. someone else can confirm that.

305s fit damn good on my oem sport wheels.

came in handy this past weekend at zdayz when running the dragon and all the nonsense roads down there lol

RBfastback 05-18-2015 11:32 AM

can only get 315 in drag tires.

Tire rack shows the 305/30/19 Super Sport tires to be 12.1" wide (307mm) and 26.3" tall.

It shows the 295/35/19 Super Sport tires to be 11.9" wide (302mm) and 27.1" tall.

width is almost the same but wouldn't there be more acceleration traction with the 295 because of the taller sidewall and only a 5mm difference in width?

FPenvy 05-18-2015 11:44 AM

Quote:

Originally Posted by RBfastback (Post 3201224)
can only get 315 in drag tires.

Tire rack shows the 305/30/19 Super Sport tires to be 12.1" wide (307mm) and 26.3" tall.

It shows the 295/35/19 Super Sport tires to be 11.9" wide (302mm) and 27.1" tall.

width is almost the same but wouldn't there be more acceleration traction with the 295 because of the taller sidewall and only a 5mm difference in width?

in theory im sure but i'd say find some test results lol

but at that point it's splitting hairs. i'm also a fan of RE-11's over PSS's anymore after I realized how much stiffer the sidewall on the re-11s are.

VinceThe1 05-18-2015 11:45 AM

Quote:

Originally Posted by RBfastback (Post 3201085)
I may be looking too far into this but maybe someone can enlighten me.
For rear Nismo wheels changing the stock 285/35/19 over to a 305 everyone says to go with 305/30/19 but that doesn't make sense if ur doing it for traction because u may gain about .79 inch wider but your loosing overall diameter -2.04 inch or -2.4% circum. so it's a wash from what I gained going wider.
but 305/35/19 u gain .79 wide and gain 1.73 inch or 2.1% circum. and that's less of a difference or change then oem size so your speedo would technically be more accurate with the 305/35/19 even tho it's a small difference but that means slightly more meat.http://images.tapatalk-cdn.com/15/05...131996b4e4.jpghttp://images.tapatalk-cdn.com/15/05...94e4a65a29.jpg

all the percentages are less of a change for 35 series tires

That's why you get 325/30R19s...much much closer to the overall diameter of the factory 285.

VinceThe1 05-18-2015 11:47 AM

Quote:

Originally Posted by Zipper1 (Post 3201040)
I would do as suggested, im just not sure i could lower the car with that size up front. I have yet to see this done
with a drop. Anyone?

I have so much clearance with 285s upfront and stock Nismo wheels and stock ride height, that I'm about to install 10mm spacers upfront to make my tires flush with the fenders. The more you lower, the further in they're gonna go, so accordong to that, 285s upfront should have no issues whatsoever with lowering...infact you'll need 10-15mm spacers to make them look flush.

VinceThe1 05-18-2015 11:51 AM

Quote:

Originally Posted by RBfastback (Post 3201154)
diameters aren't really my goal, it's for now while I have stock wheels I'm looking for the most traction possible for the rear for when I f.i. my z.
idk where I was reading it about going from 285/35/19 to 305/30/19 isn't as much grip (in a strait line) as u think because of the loss of circumference. obviously when cornering it's better.
only options I can find on the calculator are 295/35 but that's such a minuscule difference and there more expensive or 325/30 and those look like they would be amazing but I don't think it will work in the 10.5 rear nismo wheels...
any thoughts aside from new wheels cuz that won't be for awhile.

I plan on using PSS tires

Oh 325/30R19s fit just fine on stock Nismo 10.5" wheels :)

Check out my thread on that exact subject:

http://www.the370z.com/wheels-tires/...5-30r19-r.html

RBfastback 05-18-2015 12:18 PM

Quote:

Originally Posted by VinceThe1 (Post 3201260)
Oh 325/30R19s fit just fine on stock Nismo 10.5" wheels :)



Check out my thread on that exact subject:



http://www.the370z.com/wheels-tires/...5-30r19-r.html


nice man, won't work for me tho I'm lowered and I have 15mm spacers

RBfastback 05-18-2015 12:24 PM

370z MEATY TIRE THREAD
 
Quote:

Originally Posted by FPenvy (Post 3201239)
in theory im sure but i'd say find some test results lol



but at that point it's splitting hairs. i'm also a fan of RE-11's over PSS's anymore after I realized how much stiffer the sidewall on the re-11s are.


yeah I know, I'm always splitting hair's on my hobbies lol.

but for me the pss is a better choice right now because it's my dd and more of a well rounded tire also better in rain. I live in sw fl so rain is almost an every day thing in summer.
once it's not a dd I may switch to the re-11s they look like a much better track tire

FPenvy 05-18-2015 12:32 PM

Quote:

Originally Posted by RBfastback (Post 3201315)
yeah I know, I'm always splitting hair's on my hobbies lol.

but for me the pss is a better choice right now because it's my dd and more of a well rounded tire also better in rain. I live in sw fl so rain is almost an every day thing in summer.
once it's not a dd I may switch to the re-11s they look like a much better track tire

I DD on RE-11 and they are better in rain under regular driving I've found personally. and although Florida gets a good bit of rain I think last years stats PA had more lol my finace is from FL and bitches above the rain here. that's when you know it's bad.

also in these sizes 265/305 they have worn much better than 245/275 PSS which the inside 3" disintegrated on me at 12k miles.

I had about 14k on my re-11's I just took off and the rears were still above the wear bar a bit and the fronts were still at 7.5/32nds and they come new at 9/32.

ocd though and I changed all 4 for the dragon lol


All times are GMT -5. The time now is 07:25 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2