Nissan 370Z Forum - Niche forged wheels and square set up

Nissan 370Z Forum (http://www.the370z.com/)

- Wheels & Tires (http://www.the370z.com/wheels-tires/)

- - Niche forged wheels and square set up (http://www.the370z.com/wheels-tires/50699-niche-forged-wheels-square-set-up.html)

Vossen square set up

Ok guys so is it possible to run a 20X10.5 +15 square set up? The reason I ask is that previously I had a staggerd 20X9 +20 in the front and a 20X10.5 +15 in the rear in the CV3. I loved em but I want my fronts to be a bit more concave. The rears were much more concave than the front. So I was curious if this can be done and what I would need in order to accomplish this. Any help advice would be appreciated... Thanks for the info

I don't think those offsets will work. I run a 10 +34, and the 10.5 +15 would stick out an inch farther. I don't think there is that much room in the front to push them out another inch. Best is to fit the wheels to the fronts, and then use spacers in the rear.

Quote:

Originally Posted by Xplicit97 (Post 1580075)

Ok guys so really I have 2 separate questions here but I figured I could get it all hashed out in one thread. My question is this, does anyone know the quality of Niche forged wheels? Anyone have them? I'm trying to decide on a set of wheels right now, and I wanted to know what people thought of them. I know Niche use to be great back in the day, but anymore I don't know.

The other part of my question is it possible to run a 20X10.5 +15 square set up. The reason I ask is that previously I had a staggerd 20X9 +20 in the front and a 20X10.5 +15 in the rear in the CV3. I loved em but I want my fronts to be a bit more concave. The rears were much more concave than the front. So I was curious if this can be done and what I would need in order to accomplish this. Any help advice would be appreciated... Thanks for the info

Niche is now owned by MHT which makes good quality 3-piece wheels. Which particular wheels are you interested in? I will check the fitment with Niche and see what's available.

The Niche forged Concourse.. I don't see sizes or fitments on their page, but I would be interested in 20X9 20X10 - 20X12, fairly low offsets so I can get the most concave look. Thanks

This is what I am trying to acheive but with my Z. I figure if a G35 can do it the 370 should have no problem as we seem to run more aggressive setups than the Gs. I contacted Vossen directly and they said it could be done, but with suspension, possibly fender modification and tires. Can you tell me what I would need to accomplish this? Currently the car is stock height, but I am ordering BC Racing BR coilovers. What else do you think I would need to accomplish this. It's a 20X10.5 +15 "square" set up. Obviously stretched tires, but how stretched?

http://www.vossenwheels.com/Gallery/...VVSCV3_7e1.jpg

if u have a base u could run that easily...if not u need a 10mm spacer for the front to clear brakes..and then ofcourse fender modding.

Mine is a base model, still need fender modding and if so how severe?

You will need to roll your front fenders, and you will need to modify the fender liner by either heating and stretching it, or removing portions.