Looking to get some wheels and the SSR GTV02 and GTX01 caught my attention. Anyone have/seen these in 18's on a Z before? In fact, has anyone seen the GTX01 in real life yet (seems new)? Wondering what color would match a gun metal Z. Thoughts?

Wheels: SSR Type C-RS
Specs: 18x10.5+25 (F) & 18x10.5+25 w/20mm spacers so +5 (R)
Tires: 285/35/18 (F&R)

http://tigermack.zenfolio.com/img/s9...27689227-5.jpg
http://tigermack.zenfolio.com/img/s1...27689234-5.jpg

Is anybody running the spec on any SSR's? Just want to double check what I think I want.

19x10.0 +19 HP Disk
19x11.5 +18 SL Disk

Seems like it'll fit fine. I know you have full suspension adjustment so you're more than good with any alignment requirements

I am running 20x12 +20 in the rear, which is a smidge more aggressive than you, on a 315/25/20 tire at -2 camber

You should be easily able to fit a 325 in rear and it'll be square

Fronts are pretty close to the 19x9.5 +22 that everyone runs in front without adjustment

i think u are more than good

of course

with your full adjustment you could run 19x10 +0 and 19x11.5 +0 if you really wanted to . . . .

This crap is stressful..... LOL

We will get through this :happydance:

There's no setup that hasn't been tried before

And you have full adjustment

Camber will solve everything

And find a good fender roller for the front

...no need for a fender roll with the right amount of camber. I'm running the Nismo rears up front while one of these POS Forgestars are getting fixed...again. 19x10.5 et23 w/ 285/35 and -3.5 camber = no rubbing whatsoever.

New SSR MS3 wheels going on soon. I am waiting on tires to arrive. They should be here tomorrow. Install will be scheduled for Friday if all goes well.

My new tires showed up today. Install will be next week.

Tires are mounted on the wheels. Won't be long now. A car wash is in order before picture time.

You are tease, lets see them new shoes already!

WTF...:worthless:

LOL, Dang man I was working on it. You need to get a set.

[IMG]https://farm5.staticflickr.com/4708/...62248369_k.jpg20180121_121823(1) by , on Flickr[/IMG]

I need to add a little bit more Camber to the front. My tires were wearing more on the outside anyway. The fitment is perfect.

Front: 19x10 +29
Rear: 19x11.5 +30.

[IMG]https://farm5.staticflickr.com/4619/...bb54724e_k.jpg20180121_121649 by , on Flickr[/IMG]