DVO, do you know the Pro Spec guys?

Yeah, I know Brian from over there.

Those are the Best looking wheels I've seen. Deep concave, step lips:yum:

If I went stanced, this would be the look. perfecto!

Stay on the Light side young Jedi.

lol, I won't stance it. I like the drivability too much.

Formula Mesh in Gunmetal from @z34_jdm on IG.

https://igcdn-photos-d-a.akamaihd.ne...38779086_n.jpg

Never thought that design would look good on any non-nostalgic car but it really does

He needs to run the center caps!

yeah it does look good. Fitment is too aggressive for my taste but different strokes, different folks.

I always was thinking how those bumper ducts looks in the 2013+ front bumper... and i think is too much... dont know... maybe is the car how knows hahah!! BTW need his brakes lol!

If only they made the CV01S in 19inch... :(

Yea this is what killed it for me :(.

So now I am back at looking at SP1.

I searched this thread for specs, found a spectrum silver set on a 350Z on page 30. Not sure if the same specs apply to 370Z.

What is the best specs and dish needed for a flush fit and most dish for 19x9.5F and 19x10.5R on a stock height Z with Akebono brakes?

the same m o t h e r f u c k ing sizes you've been given in all the other wheel threads you've posted, or as near as they offer

Sorry i know what specs, what i meant was what dish to clear brakes?

For the front would i go +25 hp or +12 hp?

Look at the chart and figure it out? Same process I showed you with the works
Or email an Ssr dealer

You love making things more complicated than they need to be

Mag_blacks old setup was very aggressive, I quoted the specs for you to reference

From what I've seen, these could be the only set of any style SSR wheel ever made with SBC disks (if the finish really is discontinued), Bronze Clear barrels, and Gold pierce bolts. Feel free to correct me if I'm wrong, I'd actually really like to know if someone else has this combo. Plan is to throw them on in the spring.

http://i785.photobucket.com/albums/y...psgzdckvnb.jpg

with 3 piece wheels, offset has nothing to do with brake clearance. it's the disk. the +25 HP has the same exact clearance as the +12 HP.

I can confirm this is the only set of wheels in this configuration. Also, SBC is still available for the Professor Series wheels.

Looking to get some wheels and the SSR GTV02 and GTX01 caught my attention. Anyone have/seen these in 18's on a Z before? In fact, has anyone seen the GTX01 in real life yet (seems new)? Wondering what color would match a gun metal Z. Thoughts?

Wheels: SSR Type C-RS
Specs: 18x10.5+25 (F) & 18x10.5+25 w/20mm spacers so +5 (R)
Tires: 285/35/18 (F&R)

http://tigermack.zenfolio.com/img/s9...27689227-5.jpg
http://tigermack.zenfolio.com/img/s1...27689234-5.jpg

Is anybody running the spec on any SSR's? Just want to double check what I think I want.

19x10.0 +19 HP Disk
19x11.5 +18 SL Disk

Seems like it'll fit fine. I know you have full suspension adjustment so you're more than good with any alignment requirements

I am running 20x12 +20 in the rear, which is a smidge more aggressive than you, on a 315/25/20 tire at -2 camber

You should be easily able to fit a 325 in rear and it'll be square

Fronts are pretty close to the 19x9.5 +22 that everyone runs in front without adjustment

i think u are more than good

of course

with your full adjustment you could run 19x10 +0 and 19x11.5 +0 if you really wanted to . . . .

This crap is stressful..... LOL

We will get through this :happydance:

There's no setup that hasn't been tried before

And you have full adjustment

Camber will solve everything

And find a good fender roller for the front

...no need for a fender roll with the right amount of camber. I'm running the Nismo rears up front while one of these POS Forgestars are getting fixed...again. 19x10.5 et23 w/ 285/35 and -3.5 camber = no rubbing whatsoever.

New SSR MS3 wheels going on soon. I am waiting on tires to arrive. They should be here tomorrow. Install will be scheduled for Friday if all goes well.

My new tires showed up today. Install will be next week.

Tires are mounted on the wheels. Won't be long now. A car wash is in order before picture time.

You are tease, lets see them new shoes already!

WTF...:worthless:

LOL, Dang man I was working on it. You need to get a set.

[IMG]https://farm5.staticflickr.com/4708/...62248369_k.jpg20180121_121823(1) by , on Flickr[/IMG]

I need to add a little bit more Camber to the front. My tires were wearing more on the outside anyway. The fitment is perfect.

Front: 19x10 +29
Rear: 19x11.5 +30.

[IMG]https://farm5.staticflickr.com/4619/...bb54724e_k.jpg20180121_121649 by , on Flickr[/IMG]

They look awesome!! Looking at these exact wheels for my street set.

I was going to wait a month or so before installing but I couldn't stand it. Wash the car and the wife's car yesterday. Installed them late last night. Tire size is RE11 285/35/19 front and 325/30/19 rear. Now it is time to wash the truck. Ugg. I can't stand washing my truck.

Lugnuts are Project Kics Leggdurra. Got them from Kamispeed also. I did the rim bands and new TPMS sensors, that added around $300 to the deal. Be ready for a 4-6 month wait.

Get our checkbook out money bags.... Josh is waiting on your call.

LMAO my brother...those bad boys look hot! Josh is gonna have to wait because I'm wheel poor right now and my next priority will be an engine rebuild. I need more booooost!

PS: You need to paint those door handles black!!!:stirthepot: