Something about the Work Gnosis gs2...

Apoc370z · 11-24-2011, 05:18 PM

is so mesmerizing..

Is there a so cal work wheel vendors that carry those? most of the sponsors here are in the east coast and the shipping will cost an arm and limb..

looking for 19x9 fronts and 19x10.5 rears

not too sure about offsets, i want them to stay flush with the fenders. any help is greatly appreciated

kuriz32 · 11-24-2011, 06:10 PM

Work USA is in SoCal and there are a few SoCal vendors on here that sell Work Wheels. Most of the Gnosis wheels are made to order though since you can customize all the sizes and colors.

Apoc370z · 11-24-2011, 10:35 PM

Quote:

Originally Posted by kuriz32

Work USA is in SoCal and there are a few SoCal vendors on here that sell Work Wheels. Most of the Gnosis wheels are made to order though since you can customize all the sizes and colors.

ah sounds good, appreciate the info

happytheman · 11-28-2011, 01:06 AM

I would loooove to have me a set of these. Hmmm, snowboard trip or $3k+ worth of wheels?

litesky · 11-28-2011, 01:25 AM

If you are going to custom build your wheels then they will ship from Japan and hit California first. Most East Coast vendors have distributors here to help ship once it reaches California.

happytheman · 11-28-2011, 07:36 AM

I thought work wheels were built in California? Is this not the case when you are asking for a one-off build?

Hen Eggs · 11-29-2011, 10:12 AM

Get the GS2's; they are so bad-*** in person. I don't go anywhere that someone doesn't come up to my car and ask about the wheels / lugs.

Apoc370z · 11-29-2011, 01:52 PM

Quote:

Originally Posted by Hen Eggs

Get the GS2's; they are so bad-*** in person. I don't go anywhere that someone doesn't come up to my car and ask about the wheels / lugs.

Yeah i was inspired by the venaci spirit at first but the turn around time and vendor issue changed my mind.

So what wheels and lugs are you using?

Apoc370z · 11-29-2011, 01:55 PM

Quote:

Originally Posted by happytheman

I thought work wheels were built in California? Is this not the case when you are asking for a one-off build?

Thats what i thought as well, i thought i wont have to go through the manufacturers in japan.

I was thinking of getting a set with gun metallic spokes and brushed lips

Jamaica · 11-29-2011, 07:52 PM

Go through another work dealer like amplified motorsports

Apoc370z · 11-29-2011, 09:03 PM

Quote:

Originally Posted by Jamaica@UAMotorsports

Go through another work dealer like amplified motorsports

Thanks of the info andrew, I will send them a mail later.

Oh if you have time please get back to me regarding the side blades in both cf and FRP, i will place my order at the end of december, just deciding between the 2. Thanks in advance

kuriz32 · 11-29-2011, 10:57 PM

If you're looking for the experts on Work wheels, I'd hit up RavSpec. They're not in Cali, but they really seem to know their **** - moreso than anyone else.

Hen Eggs · 11-30-2011, 07:29 PM

Quote:

Originally Posted by kuriz32

If you're looking for the experts on Work wheels, I'd hit up RavSpec. They're not in Cali, but they really seem to know their **** - moreso than anyone else.

Absolutely agree. RAVSPEC is who I ordered my Gnosis GS2's from and he was excellent to deal with; good turnaround time - all around good experience. Really knows his wheels.

Hen Eggs · 11-30-2011, 07:30 PM

Quote:

Originally Posted by Apoc370z

Yeah i was inspired by the venaci spirit at first but the turn around time and vendor issue changed my mind.

So what wheels and lugs are you using?

Work GNOSIS GS2's w/ Volk Racing lugs; tires are Hankook V12 EVO's I think ... RAVSPEC is the guy to go to.

vividracing · 11-30-2011, 08:09 PM

Quote:

Originally Posted by Apoc370z

is so mesmerizing..

Is there a so cal work wheel vendors that carry those? most of the sponsors here are in the east coast and the shipping will cost an arm and limb..

looking for 19x9 fronts and 19x10.5 rears

not too sure about offsets, i want them to stay flush with the fenders. any help is greatly appreciated

We're in AZ, and could probably just have the wheels dropshipped from Work in Cali, so shipping won't be bad. Check this Z34 out

11-24-2011, 05:18 PM	#1 (permalink)
Apoc370z A True Z Fanatic Join Date: May 2011 Location: Orange County, CA Posts: 999 Drives: 2011 GM z34 Rep Power: 15	Something about the Work Gnosis gs2... is so mesmerizing.. Is there a so cal work wheel vendors that carry those? most of the sponsors here are in the east coast and the shipping will cost an arm and limb.. looking for 19x9 fronts and 19x10.5 rears not too sure about offsets, i want them to stay flush with the fenders. any help is greatly appreciated

11-28-2011, 01:06 AM	#4 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	I would loooove to have me a set of these. Hmmm, snowboard trip or $3k+ worth of wheels? __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

11-28-2011, 07:36 AM	#6 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	I thought work wheels were built in California? Is this not the case when you are asking for a one-off build? __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WORK Gnosis GS4 - Black Center - Bronze Lip	RavSpec	Wheels & Tires	50	01-21-2012 03:03 AM
Savini BS1, Work Gnosis GS2, or MHT Mark X	ArtK	Wheels & Tires	18	01-09-2012 12:05 AM
[FOR SALE] Work Gnosis GS4 20X11 $400	SINZ	Parts for sale (Private Classifieds)	2	10-22-2011 06:16 PM
Work Gnosis GS4 20X11 $400	SINZ	Parts for sale (Private Classifieds)	5	10-20-2011 03:11 PM
[FOR SALE] Work Gnosis GS4 19" (O-disk)	Rubidium	Parts for sale (Private Classifieds)	35	09-11-2011 08:44 PM

11-24-2011, 06:10 PM	#2 (permalink)
kuriz32 Base Member Join Date: Aug 2011 Location: San Diego Posts: 111 Drives: 300ZX TT, 350z Nismo Rep Power: 14	Work USA is in SoCal and there are a few SoCal vendors on here that sell Work Wheels. Most of the Gnosis wheels are made to order though since you can customize all the sizes and colors.

11-28-2011, 01:25 AM	#5 (permalink)
litesky Enthusiast Member Join Date: Aug 2010 Location: Socal-OC Posts: 354 Drives: 370z Rep Power: 15	If you are going to custom build your wheels then they will ship from Japan and hit California first. Most East Coast vendors have distributors here to help ship once it reaches California.

11-29-2011, 07:52 PM	#10 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Go through another work dealer like amplified motorsports

11-29-2011, 10:57 PM	#12 (permalink)
kuriz32 Base Member Join Date: Aug 2011 Location: San Diego Posts: 111 Drives: 300ZX TT, 350z Nismo Rep Power: 14	If you're looking for the experts on Work wheels, I'd hit up RavSpec. They're not in Cali, but they really seem to know their **** - moreso than anyone else.