|
I originally did 3.0 for the look. im sitting at 2.0 now thinking it would be ok for an autocross setup but even after that its still too much. i
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
10-31-2011, 01:15 AM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Apr 2009
Location: Bummerton
Posts: 1,510
Drives: MtB 09 370z
Rep Power: 20   |
I originally did 3.0 for the look. im sitting at 2.0 now thinking it would be ok for an autocross setup but even after that its still too much.
i dont need to know what a 345's contact patch is like to know that it wouldnt use 100% of its tread with anything more than -2 i cant imagine any factory z being close to -2.3 when spec is at 1.41 max. that being said i was considering a 20x12 20x13 setup at one point just to say it is possible but tires are too expensive with those sizes and i dont like over streching. i have no doubt it would work with mild offsets given the amount of room between the inside of my wheel/tire to the hub/damper clearance. |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| remove factory nav, install factory cubby | TPrelude-370z | Exterior & Interior | 17 | 02-06-2012 01:40 AM |
| What parts would you like to see from Fitment Factory?? | issforged | Nissan 370Z General Discussions | 115 | 08-11-2011 09:04 AM |
| Fitment Factory, Let us show you what we're about...Pic Heavy Thread!!! | issforged | Wheels & Tires | 61 | 06-27-2011 11:57 AM |
| Fitment Factory wants to know what you want!!! | issforged | Engine & Drivetrain | 20 | 06-02-2011 04:07 AM |
| Fitment Factory + ISS Forged Need your help to create a hellaflush 370z!! | issforged | Wheels & Tires | 6 | 04-13-2011 12:55 PM |
Hybrid Mode
