Wheel Spacers 101

JARblue · 08-24-2016, 01:31 AM

Quote:

Originally Posted by shadowchemos

I need to get spacers for my other wheels to clear the front calipers. I found some on amazon and was wondering if anyone could tell me if they fit because they both say they do but some of the measurements are off on them.

Thanks in advance for any help.

P.S. If anyone has a better place to get spacers that would be awesome, not trying to get anything super expensive.

No one here is going to be able to help you without wheel specs

Except I can tell you those look like cheap, generic spacers. Spend a bit more and get a proper set like H&R. Check out Z1 Motorsports.

shadowchemos · 08-24-2016, 07:02 PM

Quote:

Originally Posted by JARblue

No one here is going to be able to help you without wheel specs

Except I can tell you those look like cheap, generic spacers. Spend a bit more and get a proper set like H&R. Check out Z1 Motorsports.

On z1 i only saw a 20mm I need at least 25mm to clear my calipers, and i was hoping to get ones with studs built in not the ones where you have to get extended studs because when i go back to my stock wheels im not gonna be using spacers.

Thanks for your response, ill look at some other companies to see what they have. I was just wondering if the spec of the spacers i found on amazon was correct for my car to ensure proper fit.

JARblue · 08-25-2016, 07:41 AM

Quote:

Originally Posted by shadowchemos

On z1 i only saw a 20mm I need at least 25mm to clear my calipers, and i was hoping to get ones with studs built in not the ones where you have to get extended studs because when i go back to my stock wheels im not gonna be using spacers.

https://www.z1motorsports.com/z1-pro...mm-p-5392.html

Quote:

Originally Posted by shadowchemos

I was just wondering if the spec of the spacers i found on amazon was correct for my car to ensure proper fit.

As I already mentioned, no one is going to be able to answer that without you providing you current wheel specs ...

shadowchemos · 08-25-2016, 11:42 PM

Quote:

Originally Posted by JARblue

https://www.z1motorsports.com/z1-pro...mm-p-5392.html

As I already mentioned, no one is going to be able to answer that without you providing you current wheel specs ...

Thanks for the link, I don't know how I missed that. As for the fitment I mean the spacers fitting to the car. But now that you showed me these I think I'm all set.

Thank you for taking the time and helping my noobness.

JARblue · 08-26-2016, 07:42 AM

Yup, those should fit just fine.

For the record, hub size on the 370Z is 73.1mm. The inner bore size is 66.1mm. Hubcentric rings ?

RoadsterFun · 08-29-2016, 10:21 PM

Any difference in quality between H & R, Ichira, or Eibach? Or other recommendations? I'm going with 15mm in front and 20mm in the back with the stud replacement style of spacer...

MarksZ34 · 09-08-2016, 10:31 PM

For the ney-sayers that are so worried about spacers causing undo wheel bearing wear, I don't understand your argument for the 370z.

All we are doing using spacers with sport wheels or any aftermarket wheels is duplicating the way a Nismo looks by pushing the wheel mounting point outward to dupe the Nismo's deeper wheel offsets to make the wheels flush with the fenders. This essentially puts the Sport wheel/tire combo in the same place since there is no difference in the mounting points for all 370Zs regardless of model. This means the centers of the wheels are the same as the Nismo so this means Nissan designed it to work with Base/Sport/Nismo sets of offsets and their different loads of the wheel centerlines.

Nithmo · 09-11-2016, 01:56 PM

Quote:

Originally Posted by xdragus

hrmm the poke past hub chart is confusing for me.

Only want flush, no poke

Lowered on swifts.

nismo rims are 19" x 9.5 front and 19" x 10.5 rear.

Does that mean for rear I would need 25mm and front 20mm if i'm lowered?

Edit: Looks like 15mm all around.

I assume dragus is talking about the new Nismo wheels that appeared, starting in 2015. I'm curious about the same. I'm not sure what the specs of the new Nismo wheels are, vs the previous Nismo wheels, vs the other 19" wheels on the other trims...

I too would want just a flush look. What's the point of going "poke"? Is the ultimate goal to camber the wheels, or do guys just actually want them to stay poking out? Shiiiiet I have much to learn about this stuff. Yup, just like everyone else here

By the end of the day, I want the car to remain looking stock. I want to improve the stance a bit, by doing a modest drop and push the wheels out so they don't look so sunken, but overall, have the majority of people think the car is unmodified.

MarksZ34 · 09-11-2016, 03:43 PM

The new Nismo wheels as well as the newer Sport wheels are the same offsets as the old versions. I know there is more info on what spacers are fit for a Nismo on here but not sure it is in this thread. Do a search.

Cavallero · 03-23-2017, 08:48 PM

Quote:

Originally Posted by mults

So, I've read this thread from start to finish (almost) and cannot find what I am looking for.

After seeing a fellow Cleveland Z Club member's car with front and rear wheel spacers installed (20 front and 25 rears), I really liked the way the wheels filled the wheel well. I decided on Ichiba spacers and when installed, they were perfect. They fit like a glove and was exactly what I had in mind, until:

A friend and I drove to Watkins Glen racetrack for an event sponsored by his Alma Mater. When I entered the freeway, I hit about 65 MPH and I thought that the wheels were going to fall off

. Anything above this speed, and I could hardly hold on to the steering wheel. At the first rest stop, I rechecked the torque on the lugnuts and there were perfect.

The car felt to me that the tires were way out of balance; mostly the fronts, but in the rear as well. Every time we stopped, the nuts were checked and were found to be tight.

After the 5 hour drive, my arms were tired and the next morning before our laps at The Glen, I removed the spacers in the hotel parking lot. Once removed, the car was perfect again. At speeds up to 100 MPH, the balance was right on

.

So, fellow wheel spacers users, what the heck is going on? I made sure that the spacers were absolutely centered (the spacers are hubcentric) and the mating surfaces were clean and had no debris. I have been working in a torqueing company for 42 years and I know how to secure wheels in the proper sequence and torques, so that was not the issue. I love the way they look, but if I can't figure out what's going on, they will NOT be reinstalled.

Any insight is appreciated...

I know this post is about 1.5yrs old, but would like to know what was the outcome in resolving the issue.

NRGz · 05-15-2017, 10:32 PM

Any way to avoid open end lug nuts with extended studs?
Looking to add 15mm on the rear on 18x10.5 +15.. i currently have rays lug nuts.

Sent from my iPhone using Tapatalk

JTM88 · 05-16-2017, 09:11 AM

I have 15mm spacers and extended studs and don't use open ended lugs

Sent from my iPhone using Tapatalk

Jayhovah · 05-16-2017, 09:15 AM

Quote:

Originally Posted by NRGz

Any way to avoid open end lug nuts with extended studs?
Looking to add 15mm on the rear on 18x10.5 +15.. i currently have rays lug nuts.

Sent from my iPhone using Tapatalk

As long as you size the studs properly, you should be good.... can you get studs that are 15mm longer than stock?

RanRich · 08-22-2017, 10:14 PM

I have 15mm stud replacement spacers from H&R all around, but am toying with the idea of Swift springs and would want to jump to 20mm for the rear. H&R said I couldn't just swap the spacer itself because there wouldn't be enough thread, so I am wondering if I get a pair of 20mm bolt on's will the extended studs from the 15mm set fit in the cavities in the back of the wheel? (Sport model for reference)

RanRich · 08-29-2017, 08:58 AM

Bueller?

TLDR; I have 15mm stud replacement spacers, can I use 20mm bolt-on's in the rear without issue?

08-26-2016, 07:42 AM	#350 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Yup, those should fit just fine. For the record, hub size on the 370Z is 73.1mm. The inner bore size is 66.1mm. Hubcentric rings ? carlitos_370z likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

08-29-2016, 10:21 PM	#351 (permalink)
RoadsterFun Base Member Join Date: Feb 2016 Location: Tracy CA Posts: 35 Drives: 2010 370z Roadster Rep Power: 10	Brands of Spacers Any difference in quality between H & R, Ichira, or Eibach? Or other recommendations? I'm going with 15mm in front and 20mm in the back with the stud replacement style of spacer...

09-08-2016, 10:31 PM	#352 (permalink)
MarksZ34 Base Member Join Date: Mar 2016 Location: North Carolina Posts: 112 Drives: 09 370z M6 Sport Rep Power: 10	Fear of spacers??? For the ney-sayers that are so worried about spacers causing undo wheel bearing wear, I don't understand your argument for the 370z. All we are doing using spacers with sport wheels or any aftermarket wheels is duplicating the way a Nismo looks by pushing the wheel mounting point outward to dupe the Nismo's deeper wheel offsets to make the wheels flush with the fenders. This essentially puts the Sport wheel/tire combo in the same place since there is no difference in the mounting points for all 370Zs regardless of model. This means the centers of the wheels are the same as the Nismo so this means Nissan designed it to work with Base/Sport/Nismo sets of offsets and their different loads of the wheel centerlines. Last edited by MarksZ34; 09-08-2016 at 10:33 PM.

09-11-2016, 03:43 PM	#354 (permalink)
MarksZ34 Base Member Join Date: Mar 2016 Location: North Carolina Posts: 112 Drives: 09 370z M6 Sport Rep Power: 10	The new Nismo wheels as well as the newer Sport wheels are the same offsets as the old versions. I know there is more info on what spacers are fit for a Nismo on here but not sure it is in this thread. Do a search. Nithmo likes this.

05-16-2017, 09:11 AM	#357 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 14	I have 15mm spacers and extended studs and don't use open ended lugs Sent from my iPhone using Tapatalk __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

05-15-2017, 10:32 PM	#356 (permalink)
NRGz Enthusiast Member Join Date: Jun 2016 Location: NorCal Posts: 259 Drives: 09 Z. 06 Zx636 Rep Power: 29	Any way to avoid open end lug nuts with extended studs? Looking to add 15mm on the rear on 18x10.5 +15.. i currently have rays lug nuts. Sent from my iPhone using Tapatalk

08-22-2017, 10:14 PM	#359 (permalink)
RanRich Enthusiast Member Join Date: Mar 2015 Location: St. Louis Posts: 425 Drives: 09 PG Sport M6 Rep Power: 3373	I have 15mm stud replacement spacers from H&R all around, but am toying with the idea of Swift springs and would want to jump to 20mm for the rear. H&R said I couldn't just swap the spacer itself because there wouldn't be enough thread, so I am wondering if I get a pair of 20mm bolt on's will the extended studs from the 15mm set fit in the cavities in the back of the wheel? (Sport model for reference) __________________ AAM \| Dynosty \| Ecutek \| Eibach \| Hawk \| H&R \| Nismo \| Stillen \| Stoptech \| Z1

08-29-2017, 08:58 AM	#360 (permalink)
RanRich Enthusiast Member Join Date: Mar 2015 Location: St. Louis Posts: 425 Drives: 09 PG Sport M6 Rep Power: 3373	Bueller? TLDR; I have 15mm stud replacement spacers, can I use 20mm bolt-on's in the rear without issue? __________________ AAM \| Dynosty \| Ecutek \| Eibach \| Hawk \| H&R \| Nismo \| Stillen \| Stoptech \| Z1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Spacers - please help !	saxx77	Nismo 370Z	32	08-12-2014 06:30 PM
[FOR SALE] 5mm Wheel Spacers $60	jspec11	Parts for sale (Private Classifieds)	8	11-26-2011 11:21 AM
[WTB] H & R wheel spacers...	6MT	Parts for sale (Private Classifieds)	0	08-19-2011 01:48 PM
wheel spacers	black09Z	Wheels & Tires	9	05-19-2011 10:10 AM
wheel spacers help	thispecialk	Wheels & Tires	1	10-18-2010 08:00 PM