Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   Wheel Spacers 101 (http://www.the370z.com/wheels-tires/43573-wheel-spacers-101-a.html)

pfdaxe 04-17-2013 10:44 PM

Quote:

Originally Posted by sfearl1 (Post 2272458)
Do your 10's use stock studs?

No. They came with longer studs, but I don't know if they'll work with the extra 5mm. I don't have the 15mm yet, but wanted a head start with the studs.

Juice14 04-17-2013 11:01 PM

I have 265/40/19 and 295/35/19. Most people go for lower sidewall.

Could I go 20front and 25 rear with no rubbing? (Lowered on teins)

or maybe go 20 front and 22 rear :P??

Thank you

pfdaxe 04-17-2013 11:07 PM

Quote:

Originally Posted by Juice14 (Post 2272541)
I have 265/40/19 and 295/35/19. Most people go for lower sidewall.

Could I go 20front and 25 rear with no rubbing? (Lowered on teins)

Yes. Pretty close to what I was running with no rubbing. I had the same size spacers with 255/40 & 285/35

Bryan212 04-17-2013 11:20 PM

Hey just curious if the 25mm or the 20mm spacers cause your tires to sling dirt and water up on the side of your car?

pfdaxe 04-18-2013 05:50 AM

Quote:

Originally Posted by Bryan212 (Post 2272555)
Hey just curious if the 25mm or the 20mm spacers cause your tires to sling dirt and water up on the side of your car?

No :tiphat:

Juice14 04-18-2013 11:28 PM

Quote:

Originally Posted by pfdaxe (Post 2272546)
Yes. Pretty close to what I was running with no rubbing. I had the same size spacers with 255/40 & 285/35

thanks for the info, ive been searching for that answer for like 2 days jeje.

were you lowered when you had 20 25?

When you say it wont rub you mean daily drive or never? becasue Ill be going to the track with this setup and id hate to rub on full load. Maybe then ill get 17 front and 22 rear :) but id like to go the most agressive without rubbing (even on the track) Maybe 22 front and 25 rear.

what you think?

thanks pfdaxe

pfdaxe 04-18-2013 11:53 PM

Quote:

Originally Posted by Juice14 (Post 2274262)
thanks for the info, ive been searching for that answer for like 2 days jeje.

were you lowered when you had 20 25?

When you say it wont rub you mean daily drive or never? becasue Ill be going to the track with this setup and id hate to rub on full load. Maybe then ill get 17 front and 22 rear :) but id like to go the most agressive without rubbing (even on the track) Maybe 22 front and 25 rear.

what you think?

thanks pfdaxe

Never rubbed and I am lowered on TEIN S-Tech springs. Mine is for street use and never on a track. Here's a pic (I have different rims now though):

http://www.the370z.com/members/pfdax...tein-coils.jpg

Juice14 04-19-2013 04:38 PM

Quote:

Originally Posted by pfdaxe (Post 2274284)
Never rubbed and I am lowered on TEIN S-Tech springs. Mine is for street use and never on a track. Here's a pic (I have different rims now though):

http://www.the370z.com/members/pfdax...tein-coils.jpg


thats perfect man, thanks. lets hope it wont rub at the track

thakswet 04-25-2013 02:13 PM

PA State Law - will not pass inspection with over 1/4 inch spacers installed.
PA Bulletin, Doc. No. 03-2265

search "(xxi)"
I have to get mine taken off.

nmjaxx9 04-25-2013 09:27 PM

Quote:

Originally Posted by pfdaxe (Post 2274284)
Never rubbed and I am lowered on TEIN S-Tech springs. Mine is for street use and never on a track. Here's a pic (I have different rims now though):

http://www.the370z.com/members/pfdax...tein-coils.jpg

Niceeee now black the rest of the car out asap :tup:

pfdaxe 04-25-2013 09:34 PM

Quote:

Originally Posted by nmjaxx9 (Post 2285875)
Niceeee now black the rest of the car out asap :tup:

Done ;) :

http://www.the370z.com/members/pfdax...ted-rotors.jpg

nmjaxx9 04-25-2013 09:36 PM

Quote:

Originally Posted by pfdaxe (Post 2285883)

:yum::yum:

Juice14 04-30-2013 10:58 AM

Went with 20mm front and 22mm rear :p loving it
Ill be lowering this week. tein S tech

http://i241.photobucket.com/albums/f...429_222129.jpg

http://i241.photobucket.com/albums/f...429_202448.jpg

m4a1mustang 04-30-2013 11:02 AM

Here is 20mm all around (Z1 stud replacement) on stock height.

http://stfoto.smugmug.com/Cars/2013-...MG_0044-XL.jpg

http://stfoto.smugmug.com/Cars/2013-...MG_0064-XL.jpg

http://stfoto.smugmug.com/Cars/2013-...MG_0073-XL.jpg

http://stfoto.smugmug.com/Cars/2013-...MG_0077-XL.jpg

Juice14 05-01-2013 10:30 AM

New wheels have really grown on me. I like them now


All times are GMT -5. The time now is 04:48 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2