remove powder coat from rims

im89 · 09-25-2011, 08:05 PM

hey i bought a set of g35 rims 19" for an altima coupe they came powder coated flat black and there kinda messed up. i just wanted to know if there was a way to remove the powder coat to get them back to the stock look. What would be the best way of going about this?

nmjaxx9 · 09-25-2011, 10:38 PM

sand blast them, have a shop do it for you.

im89 · 09-26-2011, 09:46 AM

How much does that cost per wheel?

nmjaxx9 · 09-26-2011, 10:24 AM

IT shouldn't be much, I know people around CT who sandblast and powdercoat wheels for like 60 to 80 a wheel, so just sandblasting them shouldnt be more than 30 to 40 a wheel. Call up some body shops/paint shops around your area they should be able to give you accurate prices.

Mike · 09-26-2011, 11:09 AM

it depends on the shops blasting capabilities and the quality of the powdercoat. Mine are very limited and I farm out my large blasting to another coater who charges 85 per hour. He has a 210 cfm blaster. Factory wheels take him about 10-20 minutes to strip, but powdercoated ones can take an hour each if it was a good thick coat.

im89 · 09-26-2011, 03:09 PM

Ok thanks thought I would have been able to get something done cheap but it looks like I have no options.

09-25-2011, 08:05 PM	#1 (permalink)
im89 Base Member Join Date: Jul 2010 Location: NY Posts: 148 Drives: 2010 370z PW 7SP Rep Power: 15	remove powder coat from rims hey i bought a set of g35 rims 19" for an altima coupe they came powder coated flat black and there kinda messed up. i just wanted to know if there was a way to remove the powder coat to get them back to the stock look. What would be the best way of going about this?

09-26-2011, 11:09 AM	#5 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	it depends on the shops blasting capabilities and the quality of the powdercoat. Mine are very limited and I farm out my large blasting to another coater who charges 85 per hour. He has a 210 cfm blaster. Factory wheels take him about 10-20 minutes to strip, but powdercoated ones can take an hour each if it was a good thick coat. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Powder Coat Sport Rims on a Blue 370	diablokev87	Wheels & Tires	94	04-11-2011 05:05 PM
Is $350 a good deal to powder coat my rims?	TongMan	Wheels & Tires	15	11-05-2010 10:11 AM
Powder Coat in Houston? Anyone?	vnzlanbiker	Wheels & Tires	1	11-03-2010 09:29 PM
two tone powder coat rims	Zsteve	Wheels & Tires	10	10-21-2010 04:13 PM
Powder coat or not to powdercoat?	fxroar	Exterior & Interior	20	01-08-2010 03:06 AM

09-25-2011, 10:38 PM	#2 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	sand blast them, have a shop do it for you.

09-26-2011, 09:46 AM	#3 (permalink)
im89 Base Member Join Date: Jul 2010 Location: NY Posts: 148 Drives: 2010 370z PW 7SP Rep Power: 15	How much does that cost per wheel?

09-26-2011, 10:24 AM	#4 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	IT shouldn't be much, I know people around CT who sandblast and powdercoat wheels for like 60 to 80 a wheel, so just sandblasting them shouldnt be more than 30 to 40 a wheel. Call up some body shops/paint shops around your area they should be able to give you accurate prices.

09-26-2011, 03:09 PM	#6 (permalink)
im89 Base Member Join Date: Jul 2010 Location: NY Posts: 148 Drives: 2010 370z PW 7SP Rep Power: 15	Ok thanks thought I would have been able to get something done cheap but it looks like I have no options.