In a debate about rims...

rreign · 04-26-2009, 04:40 PM

I have already posted a request to have a photoshop done for this, but I also have to ask a technical question about it. I want to put Axis Hiros staggered 19's OR Axis Shine staggered 19's. Am I going to have to change the offset with either one of these? Or will I be able to just slap em on and go? Any help is appreciated

azn370z · 04-26-2009, 05:40 PM

I'm pretty sure you will need spacers. Offset 9.5 wide 30ish front, and 10.5 15ish rear will look flush. But you can go more agressive. The axis is weak with offset and width.

RCZ · 04-26-2009, 05:42 PM

depending on the width of the wheel you go with and how flush you wanted it to sit with your fender....

rreign · 04-26-2009, 06:19 PM

Quote:

Originally Posted by azn370z

I'm pretty sure you will need spacers. Offset 9.5 wide 30ish front, and 10.5 15ish rear will look flush. But you can go more agressive. The axis is weak with offset and width.

I really like the wider lips and the 3 inch inset along with a 5 spoke design. These are the only ones I have found that meet my liking. Do you know of any others that might fit that description?

azn370z · 04-27-2009, 12:08 AM

Honestly if you want wheels that are going to look more flush than stock you're probably going to have to go with more expensive wheels like volks, or ssr. If you're planning to drop the car an inch and use same size tires as oem then at least 9 inch wide with 30mm for the front and 10inch wide with 15mm for the rears. The te37 comes in those sizes but it's about $3500. I'm thinking of getting ssr in 9.5 37mm, 10.5 12mm. These wheels are about $2800.

rreign · 04-27-2009, 07:35 AM

I had SSR's on my 8 but they seemed kind of generic. Either they were knock-offs (which I doubt) or they were really good rims and I just hated to damn logo! Either way, I will have to check out some of their other series. Thanks again

rreign · 04-27-2009, 08:00 PM

Anyone know anything about Motegi rims? Are they bottom of the barrel or are they pretty decent? I found these and was looking for another opinion

Motegi TOUGE 19 inch Black Wheels - In stock! - 5x114.3 - 19x8

OMGWTFBBQ · 04-28-2009, 01:28 PM

Motegi? Really? No thanks. If you look at the price tag alone, a set of four of those Motegi wheels equal one good quality wheel.

Also, 19x8 in the front? I'd try to keep the stagger close to stock specs, which means 1" difference.

Of course, that's just me.

rreign · 04-28-2009, 05:09 PM

Well, you might be right on keeping close to stock or going a little wider but I just grabbed that one and posted it because I wanted to see what other people knew about Motegi rims. I can't find anything and really just wanted to know if anyone had any experience with them

shabarivas · 04-28-2009, 05:34 PM

Please dont cheap out on wheels.. they are the ONLY part of your car that touches the ground...

rreign · 04-28-2009, 07:50 PM

Damn... I had SSR rims on my 8 (you can see em in my album) that took me over 3 months to pick those. I just can't find any that I really think I would want for the Z. I just need some ideas from like $1500 - $2200 for the whole combo

shabarivas · 04-28-2009, 07:53 PM

I dont know how strong they are but the forgestars seem nice.. As in they look pretty cool but they weigh a lot. You can always go the work / volk route and be baller

rreign · 04-28-2009, 08:12 PM

haha, yeah that would be ballin

The_Zed_car · 04-29-2009, 01:19 PM

Motegi =/= quality.

Save up and get a set of quality wheels.

rreign · 04-29-2009, 04:52 PM

What about Tenzo?

04-26-2009, 04:40 PM	#1 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	In a debate about rims... I have already posted a request to have a photoshop done for this, but I also have to ask a technical question about it. I want to put Axis Hiros staggered 19's OR Axis Shine staggered 19's. Am I going to have to change the offset with either one of these? Or will I be able to just slap em on and go? Any help is appreciated

04-26-2009, 05:40 PM	#2 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	I'm pretty sure you will need spacers. Offset 9.5 wide 30ish front, and 10.5 15ish rear will look flush. But you can go more agressive. The axis is weak with offset and width. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

04-28-2009, 01:28 PM	#8 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Motegi? Really? No thanks. If you look at the price tag alone, a set of four of those Motegi wheels equal one good quality wheel. Also, 19x8 in the front? I'd try to keep the stagger close to stock specs, which means 1" difference. Of course, that's just me. __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTR rims for your 370Z	aliasvfx	Parts for sale (Private Classifieds)	14	02-16-2013 07:04 PM
Powerdercoat stock rims?	pagefaulted	Wheels & Tires	42	02-18-2010 01:16 AM
Optional Stock Rims	nogoodname	Wheels & Tires	15	01-29-2009 05:59 PM
370 debate on Camaro board	frost	Nissan 370Z General Discussions	132	01-25-2009 04:52 AM
Which 370Z rims do you like best?	AK370Z	Wheels & Tires	5	11-18-2008 05:17 AM

04-26-2009, 05:42 PM	#3 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	depending on the width of the wheel you go with and how flush you wanted it to sit with your fender....

04-27-2009, 07:35 AM	#6 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	I had SSR's on my 8 but they seemed kind of generic. Either they were knock-offs (which I doubt) or they were really good rims and I just hated to damn logo! Either way, I will have to check out some of their other series. Thanks again

04-27-2009, 08:00 PM	#7 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	Anyone know anything about Motegi rims? Are they bottom of the barrel or are they pretty decent? I found these and was looking for another opinion Motegi TOUGE 19 inch Black Wheels - In stock! - 5x114.3 - 19x8

04-28-2009, 05:09 PM	#9 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	Well, you might be right on keeping close to stock or going a little wider but I just grabbed that one and posted it because I wanted to see what other people knew about Motegi rims. I can't find anything and really just wanted to know if anyone had any experience with them

04-28-2009, 05:34 PM	#10 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	Please dont cheap out on wheels.. they are the ONLY part of your car that touches the ground...

04-28-2009, 07:50 PM	#11 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	Damn... I had SSR rims on my 8 (you can see em in my album) that took me over 3 months to pick those. I just can't find any that I really think I would want for the Z. I just need some ideas from like $1500 - $2200 for the whole combo

04-28-2009, 07:53 PM	#12 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	I dont know how strong they are but the forgestars seem nice.. As in they look pretty cool but they weigh a lot. You can always go the work / volk route and be baller

04-28-2009, 08:12 PM	#13 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	haha, yeah that would be ballin

04-29-2009, 01:19 PM	#14 (permalink)
The_Zed_car Base Member Join Date: Mar 2009 Location: California Posts: 80 Drives: None Rep Power: 291	Motegi =/= quality. Save up and get a set of quality wheels.

04-29-2009, 04:52 PM	#15 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	What about Tenzo?