Venaci Wheels?

VIP-STATUS

ok today is sat for me so work is close.
but from looking at the picture i think this is what happen.
This is what you have.
20x9.5 et+31 A disk with 25mm made it +6 to clear your brakes
20x11et -2 R disk for the rear.
Yes T disk will clear better,but at the time wheels was ordered they did not have T disk and was not going to do a run any time soon.
But even with T disk you still have the use spacers.

From your pictures i think work put in your disk in the other way around,since we told them it's for a 370Z with Akebono.
I don't think they know we are dong 25mm for the fronts on the A disk.
I think they put your R disk in the front when since R or T is always use for BBK.Which most of the time it's right to use R disk for the front for bbk,and O or A for the rears.
But in this case we need it for the rear.
So your front right now is a -2 that's why when you use the 25mm spacer it stick out like that.I think that mean sense.I will try to call work on monday morning and find out asap for you.
But if you want to try this first.
Put your front wheels in the rear,it should need no spacers.
Put your rear in the front with the 25mm and see how that clears.If it's clear your Akebono by 6mm then yes the center is on the wrong way.
Check it out and if i'm right.Let me know what you want to do from there.
You can have your tech remove the face and have them on the way we need them to be.And let me know the cost and we'll take care of it.And that should sit perfect the way you want it.
If not let me know what you want to do.
And i will also find out on monday from my side
thanks
rick