Yup, i did ask Rick to follow your setup... According to what you've stated in your thread last year your lip size is 2 3/4" (70mm) Fronts and 4 3/4" (120mm) Rear...

I will measure the lip size again tomorrow accurately with a tape and will update back the exact measurements... what i did just now was approximating the lip size with an iphone and measured it was somewhere at 100mm for the rears.. Hope i got the wrong approximation...

Will be ordering a set from him soon....

Thanks.... I hope others will get their wheels soon!! GL guys...

I think this is their new address for anyone who is wondering. Phone number stayed the same. Feel free to correct me if I'm wrong.

VIP STATUS
1702 West 180th St.
Gardena,Ca

Me too James,Rick told me I would get them next week and its Thursday now and it takes 4days from california but I still don’t. Have a tracking #

congrats abgyak for finally getting your wheels. them wheels look hot. baer good you got a tracking number. Rick seems to be coming thru somewhat. now for the rest of us. just in case anyone who wants to know, the new number for vip is 310-327-9938. if you call the 310-618-8886 number,it will give you this new number.

hey guys just as i was writing my previous post. Rick calls me and tells me my wheels will be in next week thur or fri(6/16,6/17). its not assembled yet, so he has to assemble them and send them out for powdecoating for a few more days into the next week. and the wheels should be ready with tires and all between the 20th and 24th according to him. we'll see what happens. ill keep ya guys posted.

I DON'T have a tracking # still playing the stalling game.:shakes head:

^sorry, my bad man. try the new number you can leave a message now.

Rick just told me on the phone its 1702 West 180th St. in Gardena.

Got an update on mine as well. Good to see some progress for the folks here. Looking forward to some pics once you get them on abgyak! May I ask what offsets you have?

I was promised a delivery on June 15th-20th a couple of weeks ago. I haven't heard anything since and have received no other updates or tracking numbers. I'll keep you guys posted. This makes it more than 5-1/2 months and counting...

Actually talked to Rick a little while ago (he called me) He said his shop is up and running and my wheels should go out Monday the 13Th so I would get them on Friday the 17Th.

Well lets see if he can do it.:ugh2:

So what wheels did you get anyways?

Vs-124 in hyper silver (the ones on Ricks car on Venaci site)

Venaci Wheels Nissan 370Z Project Car.

Just installed the wheels yesterday and found out the offset of the fronts are waaaay out.. :shakes head: at the moment a 25mm spacer supplied by Rick was used and shown in the picture below..

http://a2.sphotos.ak.fbcdn.net/hphot..._1070053_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot..._5161826_n.jpg

If i use a 10mm spacer it would clear the BBK but still would be out of the fenders.. If an 8mm spacer is used, it'll scrape the brake calipers :mad: frustrated with the results..

Also installed camber kits and the fronts had to go to -3.2 and thats not what im looking for...

I tried contacting Rick, and has not replied my PMs since yesterday. The problem keeps on coming *sigh* :mad: