Forged Specialties: SC 5S 20x10 & 20x12!

bradsm87 · 09-19-2011, 06:40 AM

Looking forward to seeing some pics of this a bit lower and about -1.5 all round. I'm assuming that's roughly the camber you're gonna run?

daisuke149 · 09-19-2011, 11:11 AM

Quote:

Originally Posted by Iwan72

Hows the handling improved? Is it too much for the front to swallow 10? Sorry for the stupid question though

10" fits just fine. i run a 275 tire. If i had it slightly lowered i could run a 285 or more or if i ran more camber.

Quote:

Originally Posted by billet370

looks good bro.... Cant wait to see it

you've seen it.....

Quote:

Originally Posted by bradsm87

Looking forward to seeing some pics of this a bit lower and about -1.5 all round. I'm assuming that's roughly the camber you're gonna run?

Hrmm not sure what camber im aiming for, i like where it is. Might just leave it there. but its def not going lower.

bradsm87 · 09-19-2011, 05:44 PM

U said u were lowering the front a bit. Did u end up doing that?

1.5 degrees is very mild even for just street driving and would do that little bit to get the edge of the wheel closer to flush rather than sticking out. U won't have any probs with tyre wear at 1.5.

daisuke149 · 09-19-2011, 06:25 PM

oh yeah from the pics (i forgot about that) its lowered slightly. the top of the wheels in the front sit wiht the fender.

i should have updated pictures later on.

Carbon_z · 09-19-2011, 09:22 PM

I haven't seen it with the new shoes smart-***.

bullitt5897 · 09-19-2011, 09:50 PM

Quote:

Originally Posted by billet370

I haven't seen it with the new shoes smart-***.

hey smart a$$ you were there at the meet and he drove the car when chris was here lol

Carbon_z · 09-19-2011, 11:06 PM

Hey Mike, dumbass number two....Here's the meet, where are the wheels?

Second, I didnt see his car at the restaurant because he was too cool to part next to us lol

SuperZeto · 12-17-2011, 08:29 PM

nice ride. needs to be slammed.

daisuke149 · 12-18-2011, 12:12 AM

Quote:

Originally Posted by SuperZeto

nice ride. needs to be slammed.

sure i'll slam it. but then im sending you the bill to fix the underbody of my car and front bumper.. and rear bumper cus they will break off on my driveway.

Jamaica · 12-18-2011, 12:28 AM

How much does the wheel weigh?

daisuke149 · 12-18-2011, 12:38 PM

I never measured them actually. When carrying them around they were lighter than I had expected.

Jeffblue · 12-18-2011, 09:21 PM

Quote:

Originally Posted by daisuke149

I never measured them actually. When carrying them around they were lighter than I had expected.

20" wheel weight=who cares?

daisuke149 · 12-18-2011, 09:30 PM

Quote:

Originally Posted by Jeffblue

20" wheel weight=who cares?

obviously some people cared enough to ask.

theART · 12-21-2011, 02:51 AM

wheel design look good, but I hope you've adjusted that camber to make it flush, cause without that it looks like 4x4.

TypeOne · 12-21-2011, 03:47 PM

Damn that thing is 4x4 status!

Looks like very nice work though!

09-19-2011, 09:22 PM	#50 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	I haven't seen it with the new shoes smart-*. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at** http://www.instagram.com/carbonz.

09-19-2011, 11:06 PM	#52 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	Hey Mike, dumbass number two....Here's the meet, where are the wheels? Second, I didnt see his car at the restaurant because he was too cool to part next to us lol __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Feeler F.S. Concave Mesh 20x10 20x12	W.O.W. 370Z	Parts for sale (Private Classifieds)	55	03-15-2011 01:10 PM
Forged Specialties SC-9	symple84	Parts for sale (Private Classifieds)	27	03-01-2011 01:40 AM
My Forged Specialties Mesh Wheels	Jeffblue	Wheels & Tires	52	01-30-2011 07:22 PM

09-19-2011, 06:40 AM	#46 (permalink)
bradsm87 Base Member Join Date: Sep 2011 Location: Australia Posts: 5 Drives: N/A Rep Power: 14	Looking forward to seeing some pics of this a bit lower and about -1.5 all round. I'm assuming that's roughly the camber you're gonna run?

09-19-2011, 05:44 PM	#48 (permalink)
bradsm87 Base Member Join Date: Sep 2011 Location: Australia Posts: 5 Drives: N/A Rep Power: 14	U said u were lowering the front a bit. Did u end up doing that? 1.5 degrees is very mild even for just street driving and would do that little bit to get the edge of the wheel closer to flush rather than sticking out. U won't have any probs with tyre wear at 1.5.

09-19-2011, 06:25 PM	#49 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	oh yeah from the pics (i forgot about that) its lowered slightly. the top of the wheels in the front sit wiht the fender. i should have updated pictures later on.

12-17-2011, 08:29 PM	#53 (permalink)
SuperZeto Base Member Join Date: Aug 2011 Location: Redmond, WA Posts: 92 Drives: '78 280Z, '09 370Z Rep Power: 14	nice ride. needs to be slammed.

12-18-2011, 12:28 AM	#55 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	How much does the wheel weigh?

12-18-2011, 12:38 PM	#56 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	I never measured them actually. When carrying them around they were lighter than I had expected.

12-21-2011, 02:51 AM	#59 (permalink)
theART Base Member Join Date: Feb 2009 Location: BC Posts: 163 Drives: To Drive Rep Power: 7822	wheel design look good, but I hope you've adjusted that camber to make it flush, cause without that it looks like 4x4.

12-21-2011, 03:47 PM	#60 (permalink)
TypeOne A True Z Fanatic Join Date: Jul 2010 Location: Baton Rouge, LA Posts: 2,682 Drives: BSM 370 Rep Power: 1851	Damn that thing is 4x4 status! Looks like very nice work though!