Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   20x9.5+20x12 Venaci VS124 on my 370Z (http://www.the370z.com/wheels-tires/3642-20x9-5-20x12-venaci-vs124-my-370z.html)

VIP-STATUS 04-19-2009 01:23 AM

20x9.5+20x12 Venaci VS124 on my 370Z
 
So just picked up my wheels from the airport today from Japan.
Venaci VS124
20X9.5+20X12
Look's like the tire i'm going to be getting from Falken are going to be
255-35-20+305-25-20 is all they make as of now.Will try to go wider and taller when they make some.
Matt Black on left side
Burning Black in right side
http://i14.photobucket.com/albums/a3...Picture826.jpg
http://i14.photobucket.com/albums/a3...Picture819.jpg
http://i14.photobucket.com/albums/a3...Picture806.jpg
http://i14.photobucket.com/albums/a3...Picture809.jpg
http://i14.photobucket.com/albums/a3...Picture790.jpg
http://i14.photobucket.com/albums/a3...Picture789.jpg
http://i14.photobucket.com/albums/a3...Picture786.jpg
http://i14.photobucket.com/albums/a3...Picture360.jpg
http://i14.photobucket.com/albums/a3...Picture362.jpg
http://i14.photobucket.com/albums/a3...Picture355.jpg
http://i14.photobucket.com/albums/a3...Picture356.jpg
http://i14.photobucket.com/albums/a3...Picture359.jpg:tup:

Brazilbro 04-19-2009 02:13 AM

wow! i can only imagine the price of theses

SoCal 370Z 04-19-2009 02:15 AM

Can I please have my Benjamin back now?

arcticreaver 04-19-2009 02:33 AM

baller....

SOLISIMO 04-19-2009 05:50 AM

Holy Crap those are sexy, I can imagine those on my G....

CA3 04-19-2009 02:10 PM

i have been trying to find Venaci wheels online and i cant find them ANYWHERE!!! where did you find them and what was the cost if you dont mind me asking? will 20X12's fit a Z?

VIP-STATUS 04-20-2009 01:23 AM

i'll post some pictures this week of a 20x12 in the rear with that lip.
the 370z take so much more wheels then a 350z.
And when a 370z is drop man you can do so much ,more
on my 350z is did 19x9.5et15+19x11 et17 easy.
why you want to pay for wheels that will sit inside your fender or have to run spacers! or look stock!
VIP Status, 19148 Van Ness Ave, Torrance CA 90501. Email: sales@vipstatususa.com, Tel#: 310-618-8886, Fax#: 310-618-8848
from 2003-2009 we have done about 10-15 cars 350z a week.:tup:

Quote:

Originally Posted by CA3 (Post 59236)
i have been trying to find Venaci wheels online and i cant find them ANYWHERE!!! where did you find them and what was the cost if you dont mind me asking? will 20X12's fit a Z?


fastgt350 04-20-2009 12:09 PM

ill take the matte black ones pease!!!!

VIP-STATUS 04-20-2009 12:52 PM

let me knnow when your ready!:tup:


Quote:

Originally Posted by fastgt350 (Post 59679)
ill take the matte black ones pease!!!!


NA&CH 04-20-2009 01:47 PM

Any Advans Rick? Gimme some GOLD :D

Chris

VIP-STATUS 04-20-2009 06:22 PM

what model Advans bro? :tup:

Quote:

Originally Posted by NA&CH (Post 59723)
Any Advans Rick? Gimme some GOLD :D

Chris


NA&CH 04-20-2009 07:54 PM

Quote:

Originally Posted by VIP-STATUS (Post 59889)
what model Advans bro? :tup:

Well I had the rgs on 350. I know they dont make those in 19's. I see they made some Advans with lips :D

I dont want to thread jack your rim thread :D

Chris

CA3 04-29-2009 09:57 AM

do you have pics yet of the wheels on the car yet???

VIP-STATUS 05-01-2009 12:50 AM

http://i14.photobucket.com/albums/a3...Picture694.jpg
http://i14.photobucket.com/albums/a3...Picture705.jpg
http://i14.photobucket.com/albums/a3...Picture424.jpg
http://i14.photobucket.com/albums/a3...Venaci/007.jpg

Quote:

Originally Posted by CA3 (Post 64960)
do you have pics yet of the wheels on the car yet???


DJcuetip 05-02-2009 12:55 AM

jeeezus

u155282 05-02-2009 02:27 AM

^^ I thought the same thing. Way too sick.

VIP-STATUS 05-02-2009 04:10 PM

http://i14.photobucket.com/albums/a3...Picture819.jpg
http://i14.photobucket.com/albums/a3...Picture806.jpg
http://i14.photobucket.com/albums/a3...Picture826.jpg
http://i14.photobucket.com/albums/a3...Picture790.jpg




Quote:

Originally Posted by u155282 (Post 66356)
^^ I thought the same thing. Way too sick.


nizz23sd 05-02-2009 09:41 PM

i like it very nice indeed!!how ever in my own opinion the best set up for this car looks and performance would be 19x9.5 front and 19x10.5 rear 255x40x19 front and either285/305 x35x19 rear.this is my set up on my 370z and i will post it next time with my volk gtf rims.

DJcuetip 05-03-2009 02:29 AM

nice..... i cant compete to those!! HAH

DJcuetip 05-03-2009 02:29 AM

can you pm me a price pls!

nizz23sd 05-03-2009 01:53 PM

hei Q wazz happenin?the rims are 880 a piece,center caps 35 a piece,rays lug nuts 180 full set. tires cost me 900 for all 4 running it with falken tires.

CA3 05-03-2009 03:03 PM

VIP-STATUS, could you do me 1 more favor please? can you post a pic from the rear end of the car with the 20X12's so i can see how wide the tire looks from the rear. Im trying to decide on 20X11's or 20X12's and I dont want it to stick out TOO far past the fenders so a picture of the 20X12's would help me out a bunch if you dont mind. thank you very much for the help!

VIP-STATUS 05-03-2009 11:41 PM

If you are planning to lower it as low as me then the 20x12 will be perfect cause of the camber.
if not that low you can go just 20x11 with 285-30-20 or 295
hope this pix helps:tup:

http://i14.photobucket.com/albums/a3...Picture786.jpg


Quote:

Originally Posted by CA3 (Post 66939)
VIP-STATUS, could you do me 1 more favor please? can you post a pic from the rear end of the car with the 20X12's so i can see how wide the tire looks from the rear. Im trying to decide on 20X11's or 20X12's and I dont want it to stick out TOO far past the fenders so a picture of the 20X12's would help me out a bunch if you dont mind. thank you very much for the help!


kgreen 05-03-2009 11:43 PM

what coilovers or springs are you sitting on?

B1nks 05-04-2009 12:17 AM

you rolled the fenders didn't you ?

CA3 05-04-2009 11:37 AM

i dont plan to lower it because the roads around here arent smooth enough to lower the car, plus ive got the sport pkg with that front chin spoiler, it would probably scrape. i like the idea of having a 12 in the rear but if you think the 11 will look better without lowering the car, i may go with the 11's. thanks for all the help!

VIP-STATUS 05-04-2009 05:30 PM

Quote:

Originally Posted by kgreen (Post 67132)
what coilovers or springs are you sitting on?

Tanabe!:tup:

VIP-STATUS 05-04-2009 05:30 PM

Quote:

Originally Posted by B1nks (Post 67142)
you rolled the fenders didn't you ?

The rear can not be rolled.Front just alittle:yum:

DannyGT 05-04-2009 07:38 PM

Quote:

Originally Posted by nizz23sd (Post 66657)
i like it very nice indeed!!how ever in my own opinion the best set up for this car looks and performance would be 19x9.5 front and 19x10.5 rear 255x40x19 front and either285/305 x35x19 rear.this is my set up on my 370z and i will post it next time with my volk gtf rims.

You should probably see my thread then, why go with that setup on those sizes when you can EASILY fit 275/305s ? Makes for a great look + great performance!

ChrisSlicks 05-04-2009 09:03 PM

Quote:

Originally Posted by VIP-STATUS (Post 67459)
The rear can not be rolled.Front just alittle:yum:

The rear doesn't need to be rolled, it's already flat! :tup:

ChrisSlicks 05-04-2009 09:08 PM

Quote:

Originally Posted by DannyGT (Post 67507)
You should probably see my thread then, why go with that setup on those sizes when you can EASILY fit 275/305s ? Makes for a great look + great performance!

Agreed. Those are the same sizes I'm running and the handling is fantastic. At first I thought the 40mm differential was going to be too much but it really is spot on for aggressive track / auto-x driving.

bullitt5897 05-05-2009 04:25 PM

VIP,

I know 9.5 et10 will fit in the front but will 11 et0 fit in the rear? I know in our other thread you were only running -2 degrees of camber @ 12 et28. What do you think?

VIP-STATUS 05-05-2009 10:59 PM

I pretty sure the 9.5et10 will be cool.Cause Our VS124 19x9.5 is et 17
the rear 19x11et0 will be cool.
:tup:
with my 20x12et28 i still got like 10mm room,hehe:tup:


Quote:

Originally Posted by bullitt5897 (Post 67913)
VIP,

I know 9.5 et10 will fit in the front but will 11 et0 fit in the rear? I know in our other thread you were only running -2 degrees of camber @ 12 et28. What do you think?


Namir 05-06-2009 12:29 AM

Front is too low IMO.
Wheels sure are 'blingin' but not really my cup of tea. Kudos on the fitment though.

armensti 05-06-2009 02:10 AM

how much do this rims weight?

VIP-STATUS 05-06-2009 01:09 PM

20x9.5 31lbs
20x12 33 lbs
right around there.3pc wheel;)

Quote:

Originally Posted by armensti (Post 68227)
how much do this rims weight?


VIP-STATUS 05-27-2009 10:55 PM

http://i14.photobucket.com/albums/a3...Venaci/007.jpg
http://i14.photobucket.com/albums/a3...Picture819.jpg
http://i14.photobucket.com/albums/a3...Picture806.jpg
http://i14.photobucket.com/albums/a3...Picture826.jpg

GreenJalapeno 05-27-2009 11:22 PM

^ holy ****.. the side wall on those tires are 20%? 0.o mine are 30% and have bent rims already =______=

VIP-STATUS 05-28-2009 01:20 PM

i know lol,but it's hard to find 305-30-20 or 315-30-20:rolleyes:

DannyGT 05-28-2009 01:42 PM

Quote:

Originally Posted by VIP-STATUS (Post 68157)
I pretty sure the 9.5et10 will be cool.Cause Our VS124 19x9.5 is et 17
the rear 19x11et0 will be cool.
:tup:
with my 20x12et28 i still got like 10mm room,hehe:tup:

Wait are you saying 9.5 +10 or +17 up front is cool ?

I dont think so...I wasnt trying to go 'hella flush' or anything but up front with a 19x9.5 +22 with a 275 tire I was rubbing at anything lower than what I am at right now (which is still pretty low). I think the reason why you guys think this is OK, is because your going crazy with the stretched rubber band tires...

If that what people want then fine, but your throwing away at least half the reason why you probably bought the car for - performance - If you look at volk they are going with much higher offsets in the front to allow people to run PROPER tires.

The rear is another story, you can definitly go crazy back their and still fit some crazy rubber!


All times are GMT -5. The time now is 05:10 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2