Hub Centric Wheel Spacers

oleg · 05-04-2011, 12:02 AM

I found these on the Z1 website Hub Centric Wheel Spacers & Extended Studs they seem to also be hub centric but it does not specify the brand and they are almost twice as cheap as H&R once that I saw most running on their Zs. would you guys take a chance with these or would you just go with the H&R once?

daisuke149 · 05-04-2011, 12:14 AM

those are the z1 brand ones. Good spacers from what ive seen and compared to others (checking them out hand in hand)

Know quite a few cars in the ATL area running them.

oleg · 05-04-2011, 12:32 AM

So, I wouldn't have to worry about running the car hard or tracking it with these?

daisuke149 · 05-04-2011, 01:20 AM

I wouldnt. I know guys who have the spacers driving their car tough a d mtn roads. And i believe z1 has tracked their spacers themselves without issue.

djpathfinder · 05-04-2011, 01:55 AM

With good quality spacers, you shouldn't have any issues using them on the track. I've tracked with my H&R's.

brucelidat · 08-23-2011, 01:11 AM

I have stock sport package Rays wheels. What length or spacers should I get to have them flush and not protruding? I read that Nismo guys are getting 15mm front, 20mm rear. Should I get the same or will I need something different?

brucelidat · 08-23-2011, 02:09 PM

I don't plan to lower it or anything, so stock springs, height, etc. Just with spacers. Will the rears look weird with 20mm spacers if not lowered? I am not sure between 15mm all around or 15mm front, 20mm rear

Flushnismo · 08-23-2011, 02:37 PM

Go 20/20 if you don't plan on lowering it and want to be flush. If you get 15mm spacers you'll have to replace your studs.

brucelidat · 08-23-2011, 02:49 PM

20s won't be protruding? Yeah, I was going to get the spacers with extra long studs.

Flushnismo · 08-23-2011, 03:55 PM

No, I had 20's and they didn't stick out, but if you're just going to replace the studs I'd go with 15mm. 20mm bolt on is cheapest and easiest though

brucelidat · 08-23-2011, 04:21 PM

Won't I need to replace the studs with 20mm also? I was planning on getting the Z1 Motorsports spacers.

partsguy · 08-23-2011, 05:54 PM

Quote:

Originally Posted by djpathfinder

With good quality spacers, you shouldn't have any issues using them on the track. I've tracked with my H&R's.

Are those aluminum spacers?

Flushnismo · 08-23-2011, 07:04 PM

No.. with 20mm you can just buy ichiba bolt on spacers.

brucelidat · 08-24-2011, 05:45 PM

cool, just ordered 20s all around

Crooz · 09-05-2011, 12:35 PM

according to some Manufacturer website 15mm bolt-on's will work on the rear Factory Ray rims, but not on the front? Does anyone know this to be Factual?

05-04-2011, 12:02 AM	#1 (permalink)
oleg Enthusiast Member Join Date: Dec 2010 Location: Illinois Posts: 321 Drives: 2011 370z 6mt sp Rep Power: 15	Hub Centric Wheel Spacers I found these on the Z1 website Hub Centric Wheel Spacers & Extended Studs they seem to also be hub centric but it does not specify the brand and they are almost twice as cheap as H&R once that I saw most running on their Zs. would you guys take a chance with these or would you just go with the H&R once?

05-04-2011, 01:55 AM	#5 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	With good quality spacers, you shouldn't have any issues using them on the track. I've tracked with my H&R's. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

08-23-2011, 02:37 PM	#8 (permalink)
Flushnismo A True Z Fanatic Join Date: Dec 2010 Location: Amarillo, TX Posts: 1,041 Drives: 2010 Boosted 40th Rep Power: 17	Go 20/20 if you don't plan on lowering it and want to be flush. If you get 15mm spacers you'll have to replace your studs. __________________ AeroJacket l BC Racing l B&M l K&N l EVO-R l TWM Performance l Tanabe l AAM l Drop Engineering l Zenclosure

08-23-2011, 03:55 PM	#10 (permalink)
Flushnismo A True Z Fanatic Join Date: Dec 2010 Location: Amarillo, TX Posts: 1,041 Drives: 2010 Boosted 40th Rep Power: 17	No, I had 20's and they didn't stick out, but if you're just going to replace the studs I'd go with 15mm. 20mm bolt on is cheapest and easiest though __________________ AeroJacket l BC Racing l B&M l K&N l EVO-R l TWM Performance l Tanabe l AAM l Drop Engineering l Zenclosure

08-23-2011, 07:04 PM	#13 (permalink)
Flushnismo A True Z Fanatic Join Date: Dec 2010 Location: Amarillo, TX Posts: 1,041 Drives: 2010 Boosted 40th Rep Power: 17	No.. with 20mm you can just buy ichiba bolt on spacers. __________________ AeroJacket l BC Racing l B&M l K&N l EVO-R l TWM Performance l Tanabe l AAM l Drop Engineering l Zenclosure

05-04-2011, 12:14 AM	#2 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	those are the z1 brand ones. Good spacers from what ive seen and compared to others (checking them out hand in hand) Know quite a few cars in the ATL area running them.

05-04-2011, 12:32 AM	#3 (permalink)
oleg Enthusiast Member Join Date: Dec 2010 Location: Illinois Posts: 321 Drives: 2011 370z 6mt sp Rep Power: 15	So, I wouldn't have to worry about running the car hard or tracking it with these?

05-04-2011, 01:20 AM	#4 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	I wouldnt. I know guys who have the spacers driving their car tough a d mtn roads. And i believe z1 has tracked their spacers themselves without issue.

08-23-2011, 01:11 AM	#6 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	I have stock sport package Rays wheels. What length or spacers should I get to have them flush and not protruding? I read that Nismo guys are getting 15mm front, 20mm rear. Should I get the same or will I need something different?

08-23-2011, 02:09 PM	#7 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	I don't plan to lower it or anything, so stock springs, height, etc. Just with spacers. Will the rears look weird with 20mm spacers if not lowered? I am not sure between 15mm all around or 15mm front, 20mm rear

08-23-2011, 02:49 PM	#9 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	20s won't be protruding? Yeah, I was going to get the spacers with extra long studs.

08-23-2011, 04:21 PM	#11 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Won't I need to replace the studs with 20mm also? I was planning on getting the Z1 Motorsports spacers.

08-24-2011, 05:45 PM	#14 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	cool, just ordered 20s all around

09-05-2011, 12:35 PM	#15 (permalink)
Crooz Base Member Join Date: Sep 2011 Location: NC Posts: 10 Drives: 2009 w/Sport Pkg Rep Power: 14	according to some Manufacturer website 15mm bolt-on's will work on the rear Factory Ray rims, but not on the front? Does anyone know this to be Factual? Last edited by Crooz; 09-07-2011 at 10:18 AM. Reason: spelling

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel spacers	doodleson	Wheels & Tires	26	11-13-2014 08:02 PM
Wheel spacers: For looks, for handling or both?	Guard Dad	Brakes & Suspension	40	07-21-2013 01:06 AM
wheel spacers	black09Z	Wheels & Tires	9	05-19-2011 11:10 AM
WTB: 25mm Wheel Spacers	TypeOne	Wanted	0	01-03-2011 11:42 PM
wheel spacers help	thispecialk	Wheels & Tires	1	10-18-2010 09:00 PM