Forgestar f-10

igota21incher · 04-27-2011, 07:11 PM

about to pull the trigger on these wheels from forgestar. im going with a 20x9 +18 up front and 20x10.5 +20 in the rear. i plan on lowering the car about 1 to 1.5 inches. keep in mind this is a daily driver Z in New york. if i want a somewhat flush setup is this the way to go? I dont want the wheels sunken in when i drop it nor do i want any rubbing. with that said i want a semi- agressive setup like this sunline racing z with ssr's @@SSR Wheels! Semi-solid forged ftw!!@@ All you wheel gurus please tell me if the fitment mentioned above will match my needs. thanks!

kenchan · 04-27-2011, 07:19 PM

Front seems too agressive and rear seems too weak. Id go with +22/+12 if lowered.

kenchan · 04-27-2011, 07:24 PM

Btw wat offsets are available?

SPOHN · 04-27-2011, 07:39 PM

Quote:

Originally Posted by kenchan

Front seems too agressive and rear seems too weak. Id go with +22/+12 if lowered.

igota21incher · 04-27-2011, 08:18 PM

+18 is too agressive even for a 9 inch rim? I could see it being too agressive for something like a 9.5 inch rim. Also I'm not trying to create a hella flush z, just something with flush or near flush with a small drop. The reason I mentioned these offsets is bc I don't have to wait for custom one to be made. Any more insight would help. Thanks for the comments guys!

kenchan · 04-27-2011, 08:26 PM

Yah, but give it a shot, I guess, and add a 10mm spacer on the rear... I know varrostoen folks are using +17 on the front for akebono setup.

djpathfinder · 04-28-2011, 12:07 AM

+18 for 9" front will not be too aggressive, especially if you're lowering. The rear, around +9 for 10.5" would be fine too.

Boost_lee · 04-28-2011, 12:34 AM

I would have ordered theses wheels if it wasn't for their weak offered offsets on the wide sizes

04-27-2011, 07:11 PM	#1 (permalink)
igota21incher Base Member Join Date: Dec 2008 Location: new york Posts: 100 Drives: 07 civic Rep Power: 16	Forgestar f-10 about to pull the trigger on these wheels from forgestar. im going with a 20x9 +18 up front and 20x10.5 +20 in the rear. i plan on lowering the car about 1 to 1.5 inches. keep in mind this is a daily driver Z in New york. if i want a somewhat flush setup is this the way to go? I dont want the wheels sunken in when i drop it nor do i want any rubbing. with that said i want a semi- agressive setup like this sunline racing z with ssr's @@SSR Wheels! Semi-solid forged ftw!!@@ All you wheel gurus please tell me if the fitment mentioned above will match my needs. thanks!

04-28-2011, 12:07 AM	#7 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	+18 for 9" front will not be too aggressive, especially if you're lowering. The rear, around +9 for 10.5" would be fine too. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
////Forgestar is here!!	GetYourWheels	Tires/Wheels	166	05-06-2013 07:38 PM
Forgestar F05	Big J	Wheels & Tires	0	02-26-2011 03:44 AM
Forgestar F14	geterdone	Wheels & Tires	18	10-06-2010 09:18 PM
forgestar f14	res0zsfa	Wheels & Tires	9	06-16-2010 08:39 PM
Forgestar F14s	Vinny	Wheels & Tires	9	06-11-2010 11:39 PM

04-27-2011, 07:19 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Front seems too agressive and rear seems too weak. Id go with +22/+12 if lowered.

04-27-2011, 07:24 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Btw wat offsets are available?

04-27-2011, 08:18 PM	#5 (permalink)
igota21incher Base Member Join Date: Dec 2008 Location: new york Posts: 100 Drives: 07 civic Rep Power: 16	+18 is too agressive even for a 9 inch rim? I could see it being too agressive for something like a 9.5 inch rim. Also I'm not trying to create a hella flush z, just something with flush or near flush with a small drop. The reason I mentioned these offsets is bc I don't have to wait for custom one to be made. Any more insight would help. Thanks for the comments guys!

04-27-2011, 08:26 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Yah, but give it a shot, I guess, and add a 10mm spacer on the rear... I know varrostoen folks are using +17 on the front for akebono setup.

04-28-2011, 12:34 AM	#8 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	I would have ordered theses wheels if it wasn't for their weak offered offsets on the wide sizes