25mm spacer in the rear with 305's will have your tire sticking out about 1/2" past the side of the car. I have 305's in the rear with 20mm spacers
|
|
LinkBack | Thread Tools | Display Modes |
04-13-2011, 02:16 AM | #31 (permalink) |
Track Member
Join Date: Aug 2010
Location: Austin, TX
Posts: 637
Drives: 10 370Z T/S M6
Rep Power: 16 |
25mm spacer in the rear with 305's will have your tire sticking out about 1/2" past the side of the car. I have 305's in the rear with 20mm spacers and they stick out a little past the fender. I'm most likely going to a 15mm spacer in the rear.
__________________
Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's |
04-13-2011, 08:29 AM | #33 (permalink) |
A True Z Fanatic
Join Date: May 2009
Location: Central Florida
Posts: 1,884
Drives: '12 Corvette GS 6M
Rep Power: 19 |
Yeah, I'd like to see a picture of that too. I'm thinking about either getting 285's again, or upping to 305.
__________________
Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT |
04-13-2011, 11:32 PM | #34 (permalink) | |
A True Z Fanatic
Join Date: Jul 2009
Location: Roseville, CA
Posts: 2,359
Drives: 09 370Z Tour + Sport
Rep Power: 21 |
Quote:
Hows the drive and response of the 285's in the rear? Also, what size were you running on the fronts with that size? I'm curious because I was deciding to go with 285's or maybe even wider... |
|
04-14-2011, 06:38 AM | #35 (permalink) |
A True Z Fanatic
Join Date: May 2009
Location: Central Florida
Posts: 1,884
Drives: '12 Corvette GS 6M
Rep Power: 19 |
It seems good, I don't have any complaints. I'm not sure about running 305 on the stock wheel, I have safety concerns with that, same with running anything higher than 265 on the fronts. I'm running 255 on the front right now. I'm going to move up to 265.
__________________
Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT |
04-14-2011, 08:30 PM | #38 (permalink) | ||
Track Member
Join Date: Aug 2010
Location: Austin, TX
Posts: 637
Drives: 10 370Z T/S M6
Rep Power: 16 |
Quote:
Quote:
This is 305's with 20mm H&R DRS spacers. Most likely going to go down to a 15mm. I can't imagine 305's with 25mm.... Would look stupid in my opinion. 1. 2. 3. 4.
__________________
Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's |
||
04-14-2011, 08:41 PM | #39 (permalink) |
Track Member
Join Date: Aug 2010
Location: Austin, TX
Posts: 637
Drives: 10 370Z T/S M6
Rep Power: 16 |
Stock rays are 10" wheels which are within spec for 305's. No safety issues at all.
__________________
Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's |
04-14-2011, 08:42 PM | #40 (permalink) |
Track Member
Join Date: Aug 2010
Location: Austin, TX
Posts: 637
Drives: 10 370Z T/S M6
Rep Power: 16 |
Seriously?... When's the last time you saw a high horsepower car running around with "grippy" 245's?
__________________
Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's |
04-14-2011, 09:36 PM | #41 (permalink) | ||
A True Z Fanatic
Join Date: Jul 2010
Location: Minot ND
Posts: 51,960
Drives: every day...
Rep Power: 213 |
Quote:
__________________
Quote:
黒子 ('Kuroko') Project: SuperNova Owner/Operator and Lead designer @BlackGuard Aeroworks |
||
04-20-2011, 01:45 AM | #44 (permalink) | |
A True Z Fanatic
Join Date: Jul 2009
Location: Roseville, CA
Posts: 2,359
Drives: 09 370Z Tour + Sport
Rep Power: 21 |
Agreed, drivers side does look like it sticks out more....tires maybe. That would be the max I would want mine to stick out. I am not one for the flush look, as long as the tires do not look goofy then I am good with a little buldge. It gives it the "something is happening in the rear look". My 275/35/19 rears look a little more tucked at the top and I am running -1.0 camber so they are pretty straight up. Your photos and setup give me a good idea how my 25mm spacers will look on 285/35/19. Thanks for posting up these pics. I agree the 15mm will look better on your 305.
I noticed your sig has spacers listed in reverse order? 25mm / 20mm What size spacers are you running up front? Quote:
|
|
04-21-2011, 03:14 AM | #45 (permalink) |
Track Member
Join Date: Aug 2010
Location: Austin, TX
Posts: 637
Drives: 10 370Z T/S M6
Rep Power: 16 |
Need to change sig.
Was running 25mm rears / 20mm fronts... Ichiba bolt-ons. Then i went to the H&R DRS spacers that replaced the studs and went to 20mm all around.
__________________
Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Swap TPMS from stock 18's to stock 19" Rays | CAN-ZED | Wheels & Tires | 12 | 03-29-2011 08:58 AM |
feeler: OEM Rays + F&R Spacers for sale on LI, NY , Anyone local interested? | chuckd05 | Parts for sale (Private Classifieds) | 21 | 12-24-2010 02:26 PM |
20" Wheel Spacers & Bigger Tires on Stock Rays | dainedazz | Wheels & Tires | 17 | 10-07-2010 02:00 AM |
Spacers necessary for Sport Rays on 350z? | spitfire9200 | Wheels & Tires | 3 | 06-11-2010 08:20 PM |
what are the sizes for wider/widest tires with 19 inch Rays with and without spacers? | BlackCherryZ | Wheels & Tires | 3 | 02-10-2010 04:51 PM |