![]() |
25mm spacer in the rear with 305's will have your tire sticking out about 1/2" past the side of the car. I have 305's in the rear with 20mm spacers and they stick out a little past the fender. I'm most likely going to a 15mm spacer in the rear.
|
Thanks for the info, do you have any photos with your 305's and 20mm spacer?
|
Yeah, I'd like to see a picture of that too. I'm thinking about either getting 285's again, or upping to 305.
|
Quote:
Hows the drive and response of the 285's in the rear? Also, what size were you running on the fronts with that size? I'm curious because I was deciding to go with 285's or maybe even wider... |
It seems good, I don't have any complaints. I'm not sure about running 305 on the stock wheel, I have safety concerns with that, same with running anything higher than 265 on the fronts. I'm running 255 on the front right now. I'm going to move up to 265.
|
Quote:
|
i am sorry, but all the fuss about tire size when you can get a grippy tire in 245 and be able do go faster
|
Quote:
Quote:
This is 305's with 20mm H&R DRS spacers. Most likely going to go down to a 15mm. I can't imagine 305's with 25mm.... Would look stupid in my opinion. 1. http://img23.imageshack.us/img23/7318/img0731qq.jpg 2. http://img863.imageshack.us/img863/3659/img0732u.jpg 3. http://img638.imageshack.us/img638/2261/img0733cp.jpg 4. http://img24.imageshack.us/img24/2552/img0735vj.jpg |
Quote:
|
Quote:
|
Quote:
|
Quote:
It's not just the size, compound is even more important. |
Quote:
|
Agreed, drivers side does look like it sticks out more....tires maybe. That would be the max I would want mine to stick out. I am not one for the flush look, as long as the tires do not look goofy then I am good with a little buldge. It gives it the "something is happening in the rear look". My 275/35/19 rears look a little more tucked at the top and I am running -1.0 camber so they are pretty straight up. Your photos and setup give me a good idea how my 25mm spacers will look on 285/35/19. Thanks for posting up these pics. I agree the 15mm will look better on your 305.
I noticed your sig has spacers listed in reverse order? 25mm / 20mm What size spacers are you running up front? Quote:
|
Need to change sig.
Was running 25mm rears / 20mm fronts... Ichiba bolt-ons. Then i went to the H&R DRS spacers that replaced the studs and went to 20mm all around. |
All times are GMT -5. The time now is 12:15 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2