ADV1 Inside
 

Car is filthy but you get the idea:)

http://i70.photobucket.com/albums/i1...-21-45_112.jpg

http://i70.photobucket.com/albums/i1...-21-52_683.jpg

http://i70.photobucket.com/albums/i1...-22-21_113.jpg

http://i70.photobucket.com/albums/i1...-21-08_143.jpg

Nice!

specs on wheels, tires, and drop please :)

Very nice! What are the specs on the wheels and tires? Is that deep concave?

ADV1 flowspecs(deep concave), 20x8.5 +25 and 20x10.5 +15, 255/35/20 and 305/25/20, H&R race springs, eibach camber arms, nrg aluminum lug nuts. Also installed AAM S line pipes tonight and they are so beastly with my test pipes.

Looks good so far, however the rear looks like it sits alot higher than the front and BBK next

I agree but its probably due to a few things: springs not settled, 25 series tire in rear, or maybe bc the hr kit lowers the front more than rear. Ill give it til the end of the week to let it settle. Keep in mind it is also on a slanted driveway.

yeah now that i look closer i can see how the front wheels are right on the top of the slant. Def looking forward to flat ground and settled pics :tup:

Will hopefully have hi res pics by thr weekend, its been rainy the past few days here....

Level ground but kinda far away.
http://i70.photobucket.com/albums/i1...-57-32_571.jpg

All these pics were taken with my droid x so bare with me lol.

how much did those niche sport's come out to?

The front tires have more height because they're a 35 series too when compared to a 25 series rear, thus you will see less gap to the fender. I thought a 255/30 series matched the diameter and revs per mile better to the 305/25 rears no?

The tires may be off a little but I went with 305/25 bc i burn up tires Fast and they are cheaper lol.

:bowrofl::ughdance:

Wheels look nice bro! Looks like you need a little more drop in the rear. I had the same issue with my H&Rs. Rear was not low enough.

Need moar concave in the front!