Looking for Forgestar F14's

Mike · 03-06-2011, 10:39 PM

Quote:

Originally Posted by boomboom

ok so just to be clear who is the cheapest

For a set of 19's piano black not sure about off set yet

ok, first off, I did purchase direct for the ones I ordered, but ...

I have had 2 sets of iForged wheels, both had problems, but were overcome and price/quality ruled over inconvenience. Forgestar is the same company as iForged.

On my C6, rather than buying direct, I bought through a larger volume vendor, simliar to Scott at RA. They sent the wrong offsets and it took me two weeks to get the correct ones.

On my 350z, the dealer dented a wheel while it was in for service.. I bought those direct and it took 5 months to get the replacement.

Mine are for the track and I am also own my own automotive business, so I buy direct, but getting a good vendor if these are your only wheels is much more important than saving a hundred bucks, imo.

boomboom · 03-07-2011, 04:30 AM

Quote:

Originally Posted by Mike

ok, first off, I did purchase direct for the ones I ordered, but ...

I have had 2 sets of iForged wheels, both had problems, but were overcome and price/quality ruled over inconvenience. Forgestar is the same company as iForged.

On my C6, rather than buying direct, I bought through a larger volume vendor, simliar to Scott at RA. They sent the wrong offsets and it took me two weeks to get the correct ones.

On my 350z, the dealer dented a wheel while it was in for service.. I bought those direct and it took 5 months to get the replacement.

Mine are for the track and I am also own my own automotive business, so I buy direct, but getting a good vendor if these are your only wheels is much more important than saving a hundred bucks, imo.

Yes good point..

ZLife · 03-15-2012, 02:00 AM

Quote:

Originally Posted by ZEDHEAD

Anybody seen low priced F14's? Modbargains looks like the lowest price so far.

No one can beat modbargains price, give them a call and you will see!

ZEDHEAD · 03-15-2012, 12:03 PM

I ended up buying them from Vivid Racing, shortly before they raised their prices(Feb '11). Found local gently used nitto invo rubber and ended up paying $1890 including installation with the TPMS off my stock setup.

Scott @ RA · 03-17-2012, 07:55 PM

Quote:

Originally Posted by ZLife

No one can beat modbargains price, give them a call and you will see!

^^ Not true.

We are a top tier, main distributor for Forgestar and IForged wheels. We can and will beat their price and anyone else's prices on these wheels.

Verbal21 · 04-07-2012, 02:27 PM

hey Scott, I just tried to send you an email looking to get the wheels in size 19 x 9 Fronts and 19 x 10 Rears with Hankcook v12's 245/40/19 F 275/35/19 R tires, but they kept bouncing back. can you pm me?

These don't come in 9.5 and 10.5 widths, do they?

ZLife · 04-07-2012, 02:56 PM

Quote:

Originally Posted by Scott @ RA

^^ Not true.

We are a top tier, main distributor for Forgestar and IForged wheels. We can and will beat their price and anyone eases prices on these wheels.

keep thinking that

Huck · 04-07-2012, 04:11 PM

Damn, this Scott guy is relentless!! Haha ok I'll bite, Scott can you please pm me the best price on some 19" F14s (9" and 10.5"?) in either textured black and carbon fiber? My choices have come down to these or a couple from Avante Gard. I'm in love with the M368's!

Sent from my iPizzle using magic and new fangled science stuff.

ModBargains · 04-09-2012, 01:24 PM

Quote:

Originally Posted by ZLife

No one can beat modbargains price, give them a call and you will see!

Your right Zlife, nobody will beat our pricing unless they plan on taking a loss

I'm still offering free shipping promotion for the forum members. So give me a call at 714 582 3330 ext 8003.

-Frank

Scott @ RA · 04-10-2012, 07:55 AM

Quote:

Originally Posted by Verbal21

hey Scott, I just tried to send you an email looking to get the wheels in size 19 x 9 Fronts and 19 x 10 Rears with Hankcook v12's 245/40/19 F 275/35/19 R tires, but they kept bouncing back. can you pm me?

These don't come in 9.5 and 10.5 widths, do they?

Yeah, sorry about that. We are in the process of changing online servers right now, so the website is acting up recently. It should be back working again real soon. In the meantime I CAN and WILL STILL beat ANY quote you can get on ANY Forgestar or IForged wheels (among others). I work with them very close on a couple projects and am THE premier dealer for Forgestar. (free shipping still available) and usually much quicker delivery time

.

Give me a call directly and we can go from there....

619-654-3585

Quote:

Originally Posted by Huck

... ok I'll bite, Scott can you please pm me the best price on some 19" F14s (9" and 10.5"?) in either textured black and carbon fiber?

Sure thing, bring me ANY price quote on the Forgestar's you get and I WILL match or beat it.

Just call me directly... 619-654-3585

Verbal21 · 04-22-2012, 11:55 PM

anybody know how difficult it would be to get my TMPS's attached to these?

ZEDHEAD · 04-23-2012, 08:22 AM

The tire shop requested that I buy a new grommet kit-$8 (as old ones are typically damaged) from nissan to have my existing TPMS switched over. Otherwise it's as simple as removing/dismounting your existing setup taking off the tpms and putting in your new setup. If I'm not mistaken the location of each tpms must be on the same wheel as previous setup or it may not register with your cars computer.

Verbal21 · 04-24-2012, 12:04 PM

Thanks, I'll look I to that. Now are there any good black or red lug nuts anyone can recommend without being charged through the roof for? I know there needs to be a specific one for our cars.

vividracing · 04-24-2012, 07:19 PM

Quote:

Originally Posted by boomboom

ok so just to be clear who is the cheapest

For a set of 19's piano black not sure about off set yet

We can definitely offer great pricing, but one thing that a lot of folks forget is customer service. Vivid has been in the business for over a decade, and we're not going anywhere. We've also got a track record of great service.

We're happy and willing to match or beat any price, any time we can. Just don't forget that the cheapest price often comes at a greater cost

Quote:

Originally Posted by Verbal21

Thanks, I'll look I to that. Now are there any good black or red lug nuts anyone can recommend without being charged through the roof for? I know there needs to be a specific one for our cars.

Any 12x1.25 lug nut with a conical seat will work. The cheaper ones will fade and change colors, though. I've seen many cheap lug nuts go from red to pink in just a few weeks of driving.

We carry and recommend the following:

Agency Power
RAYS
Muteki
Kics
Mackin eXtreme Performance (MXP)
Skunk2
TiKORE
WORK

Scott @ RA · 05-20-2012, 08:46 PM

Quote:

Originally Posted by Verbal21

hey Scott, I just tried to send you an email looking to get the wheels in size 19 x 9 Fronts and 19 x 10 Rears with Hankcook v12's 245/40/19 F 275/35/19 R tires, but they kept bouncing back. can you pm me?

These don't come in 9.5 and 10.5 widths, do they?

Thanks for the wheel order. I will update you tomorrow on the progress...

04-07-2012, 04:11 PM	#38 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Damn, this Scott guy is relentless!! Haha ok I'll bite, Scott can you please pm me the best price on some 19" F14s (9" and 10.5"?) in either textured black and carbon fiber? My choices have come down to these or a couple from Avante Gard. I'm in love with the M368's! Sent from my iPizzle using magic and new fangled science stuff. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

04-23-2012, 08:22 AM	#42 (permalink)
ZEDHEAD Base Member Join Date: Apr 2009 Location: Canada Posts: 56 Drives: 09 370Z M6 Rep Power: 16	The tire shop requested that I buy a new grommet kit-$8 (as old ones are typically damaged) from nissan to have my existing TPMS switched over. Otherwise it's as simple as removing/dismounting your existing setup taking off the tpms and putting in your new setup. If I'm not mistaken the location of each tpms must be on the same wheel as previous setup or it may not register with your cars computer. Last edited by ZEDHEAD; 04-23-2012 at 08:28 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which lugs for my Forgestar F14's?	ResQguy	Wheels & Tires	10	03-20-2011 11:05 PM
Video: The Making of Forgestar F14's	dAvenue	Wheels & Tires	8	03-01-2011 11:18 PM
Forgestar F14's on a Black Cherry Z	dAvenue	Wheels & Tires	11	12-31-2010 11:59 AM
Can someone shed light on Forgestar F14's?	toxik	Wheels & Tires	9	10-16-2010 08:08 PM
Unique Bronze 19" Forgestar F14's	Caravanshaka	Parts for sale (Private Classifieds)	25	12-10-2009 10:49 AM

03-15-2012, 12:03 PM	#34 (permalink)
ZEDHEAD Base Member Join Date: Apr 2009 Location: Canada Posts: 56 Drives: 09 370Z M6 Rep Power: 16	I ended up buying them from Vivid Racing, shortly before they raised their prices(Feb '11). Found local gently used nitto invo rubber and ended up paying $1890 including installation with the TPMS off my stock setup.

04-07-2012, 02:27 PM	#36 (permalink)
Verbal21 Base Member Join Date: Mar 2012 Location: NJ Posts: 223 Drives: '12 Solid Red Rep Power: 13	hey Scott, I just tried to send you an email looking to get the wheels in size 19 x 9 Fronts and 19 x 10 Rears with Hankcook v12's 245/40/19 F 275/35/19 R tires, but they kept bouncing back. can you pm me? These don't come in 9.5 and 10.5 widths, do they?

04-22-2012, 11:55 PM	#41 (permalink)
Verbal21 Base Member Join Date: Mar 2012 Location: NJ Posts: 223 Drives: '12 Solid Red Rep Power: 13	anybody know how difficult it would be to get my TMPS's attached to these?

04-24-2012, 12:04 PM	#43 (permalink)
Verbal21 Base Member Join Date: Mar 2012 Location: NJ Posts: 223 Drives: '12 Solid Red Rep Power: 13	Thanks, I'll look I to that. Now are there any good black or red lug nuts anyone can recommend without being charged through the roof for? I know there needs to be a specific one for our cars.