F14 fitment

rarwz

I didn't see any forgestars on their website. is that a call only thing?

speedworks

Definately give him a call, I always found that quotes online/email were ok, but once you talked to them, you got the best price. I think they just started carrying the wheels - either way give him a call, nice crew there.

rarwz

Good call on the 9.5s now being avail!

If i change out my 9 for a 9.5 should I keep the +32 for a NON DROP?

Funds are coming in, so I am hoping to order sometime next week!!!!!

djpathfinder

You'll be fine with +32.

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD

speedworks

+32 is like adding a 21mm spacer to the oem wheels. It might be too much at stock height. What I have seen is that 15mm is what most are putting on the front - some have 20mm.

rarwz

Not to be a pest, as I know this is getting old... quick... so going with the 9.5 up front, and going for a *safer* fit, maybe +36 or +38? They max at +42

Hoping to call in another quote or two monday, and either order them late monday or early tuesday. So hopefully i'll have pix in 4-8 weeks

NISMOFO

Tax return?

Yes for a STOCK height car that is going to be too much. What I have seen from your specs so far is that you are pushing the wheels farther out than a Nismo 370z and putting smaller diameter tires on. This is going to make the car look 4x4 because of how the gap will look and how easily the sun will hit the top edge of the tires. You might be able to see nearly 1/3 of the top of your tire tread standing next to the car whereas right now you see almost zero.

My thoughts for a stock height car without making it look funny (taller) or handle funny. Start with the nismo 370z specs. For a stock height car the nismo has good offsets and widths of 19x9.5 +40 and 19x10.5 +23 on 245/40 & 285/35. I think this should be your target "look" for the car. Once you start pushing the wheels out or making the tires smaller with 255/35 and 305/30 you will start wondering if you should lower it.

So with forgestar 9.5" and 11" the only thing you'd be changing is the rear width by an additional 0.5" (13mm). So just take that extra 0.5" and move it to the inside of the rear wheels. +29 rear offset on a 11" forgestar would give you a near identical look to a nismo on the outside.

Then there is the tire choice you have for stock height; I still think this is too small. Again, start with the nismo tires sizes and adjust from there, but try not to makes the tires any smaller. You're adding 0.5" wider wheels than a nismo so maybe go from a 285/35 to 295/35.

So my suggestion for stock non-4x4 looking specs on forgestar f14 would be:
19x9.5 +40 245/40R19
19x11 +29 295/35R19 (not a lot of tires choices here...BFG is one)

These are just my thoughts....its not right/wrong. If you want a more aggressive offset than a stock 370z nismo then I would start with the offsets I mentioned (+40 & +29) and subtract from those EQUALLY for the front and rear. If you want 5mm more aggressive than go with +35 front and +24 rear. Just know that the more you push them out the more the car will beg to be lowered.

I hope this helps. If you have a stock 370z you can see in person for reference that would be a huge help. Decide if you like the look. I'm not 100% sure if the suspension height is identical as a regular 370z though. I think the front is higher for bumper clearance. I know for a fact that the stock 350z nismo was taller than a stock 350z.

rarwz

Thanks for you input. This is definitely turning out to be a much harder decision than I originally thought!

NISMOFO

I just realized I was off in my calculation above! I just adjusted the rear offset......please see above for my revised rear offset spec above. Sorry I wrote all of that on my cell phone.

There are tons of variables. The width, offset, ride height, camber, tire size, tire brand and style of wheel all completely change the look.

Another thought is that these are flat faced wheels with no lip. Generally the best look for a flat faced wheel is flush to the outsides and on a car with little gap. The nismo wheels are not flat faced.

If you were lowering the car, I have completely different opinions on these specs. But I'm listening to what you want, and I'm still trying to help based on your input.

I can link you to some 370Zs (stock height) with semi-aggressive specs and the smaller 255/35 & 305/30 sizes. What you'll find is 10 pages of people saying "lower that car"....lol. You'll hear that regardless, but even more so with smaller tires and the wheels pushed out to the fenders.

When most people with Nismo wheels lower their car they add 10 or 15mm spacers (and smaller/wider tires) because the camber/gap changes everything. The negative camber makes the biggest difference and really sucks the top of the wheels in front/rear (unless you run a front camber kit).

If you were to lower the car, then I would easily suggest another 10 or 15mm lower offset (plus Forgestar doesn't sell any truly aggressive offsets for us). But I have not heard that, so I won't suggest that at all. 5mm farther out than a stock 370Z Nismo would be the most I'd suggest stock height.

I don't think this is a bad look at all with what you're wanting. I "think" there is plenty clearance on the backside for this to clear the rear shocks as well for another 13mm. I would suggest an alignment for sure.

speedworks

If you have the sports package brakes, I think with the 9.5, the least aggressive Forgestar will go is 30 (so it fits the brakes). I actually wanted 34, but had to go with the more aggressive 30 so they fit. Might want to confirm with Forgestar, but check with them.