TE37SL 19x11 Installed

phunk · 01-14-2011, 07:34 PM

Well i put them on today. they are 19x9.5 and 19x11. I hadnt seen anyone post the 11s yet so I figured I should.

Definately need spacers in the back.... I was figuring on needing a 10mm or so but now that I look at it...
i think this thing will probably need a 20mm!!! Kinda sucks but its the only offset they came in (at least when i ordered, i dunno about now)

the tires are RE11s in 275/30/19 and 305/30/19. Based on the 305s fitting just fine, while being so sunken in...
i bet a 335 could fit back here on a 12 inch wheel with the right offset.

car is dropped on H&Rs otherwise stock.

phunk · 01-14-2011, 07:36 PM

now its time to start searching for some side skirts i like. i love the greddy sides on my 350z, wish there was something just like them for the 370z.

c41006 · 01-14-2011, 07:37 PM

Looks good

zero · 01-14-2011, 07:41 PM

Nice!!! What are the offsets? They could be more aggressive.

genki370z · 01-14-2011, 07:47 PM

car looks damn good! do u have any rubbing issues running a 275 tire up front, im wondering cuz i am too plan on running some te37's and also currently dropped on H&R springs.

phunk · 01-14-2011, 07:58 PM

Quote:

Originally Posted by zero

Nice!!! What are the offsets? They could be more aggressive.

19x9.5 +22
19x11 +23

Unfortunately the only offset available. I knew the rear would be conservative but I didnt know they would be quite so bad.

Agreed. I am happy enough with the fronts. But the rear need to come out 10-20mm, and they will. I will post new pics a week or two when that is done.

ClemsonWill · 01-14-2011, 08:00 PM

Those look great! I wish my rears were 11s.

phunk · 01-14-2011, 08:01 PM

Quote:

Originally Posted by genki370z

car looks damn good! do u have any rubbing issues running a 275 tire up front, im wondering cuz i am too plan on running some te37's and also currently dropped on H&R springs.

So far nothing yet that I know of, but i suppose I should check. I hear what I believe is just my wind flap jobbers in front of the tires hitting the ground all the time. it got worse with these tires but i am positive that is just because they are 275/30/19 when they are supposed to be 275/35/19. they are a bit smaller diameter, so it lowered the front end a little more. This make/model tire doesnt come in a 275/35/19 so i bought what I could. they do look a tad small 'round up there but i dont think its very noticeable.

phunk · 01-14-2011, 08:04 PM

its probably not helping that i havent installed camber arms and toe bolts and got an alignment since lowering it... making the offset even worse. but i am at least happy to have light at the end of the tunnel here, a few hundo more $$$ and a little more work and they will look great.

RCZ · 01-14-2011, 08:09 PM

Nice! 275 front isnt keeping the stock height ratio too much. Let us know if you have any issues with the vdc acting up.

Nice setup though. I went similar. RE11 19X9.5 with 265, 19X10.5 with 305.

Very Nice car.

phunk · 01-14-2011, 08:13 PM

the VDC is operating great. the VDC in this car is adaptive and will self learn to new ratios. I learned that thru experience. Previously, ran a setup that for the first 5 min couldn't drive straight down the road without the VDC kicking in and the car bucking. After a few min it recalibrated and was perfect for several months (and then i changed to this setup).

RCZ · 01-14-2011, 08:17 PM

ok, cool. Good to know.

Waiz · 01-14-2011, 08:23 PM

I like it, just add the stickers.

Offset looks fine too IMO

djpathfinder · 01-14-2011, 08:34 PM

Looks good. There's 19x10.5 +12. I thought the 11" were special order.

SPOHN · 01-14-2011, 10:32 PM

Beautiful!! Orderd my wheels today. But there not TE37's though. Love the hood.

01-14-2011, 07:34 PM	#1 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	TE37SL 19x11 Installed Well i put them on today. they are 19x9.5 and 19x11. I hadnt seen anyone post the 11s yet so I figured I should. Definately need spacers in the back.... I was figuring on needing a 10mm or so but now that I look at it... i think this thing will probably need a 20mm!!! Kinda sucks but its the only offset they came in (at least when i ordered, i dunno about now) the tires are RE11s in 275/30/19 and 305/30/19. Based on the 305s fitting just fine, while being so sunken in... i bet a 335 could fit back here on a 12 inch wheel with the right offset. car is dropped on H&Rs otherwise stock. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-14-2011, 07:36 PM	#2 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	now its time to start searching for some side skirts i like. i love the greddy sides on my 350z, wish there was something just like them for the 370z. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-14-2011, 07:41 PM	#4 (permalink)
zero A True Z Fanatic Join Date: Dec 2008 Location: Southern California Posts: 1,259 Drives: MK 7.5 Golf R Rep Power: 22	Nice!!! What are the offsets? They could be more aggressive. __________________

01-14-2011, 08:00 PM	#7 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	Those look great! I wish my rears were 11s. __________________ Slightly modded

01-14-2011, 08:04 PM	#9 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	its probably not helping that i havent installed camber arms and toe bolts and got an alignment since lowering it... making the offset even worse. but i am at least happy to have light at the end of the tunnel here, a few hundo more $$$ and a little more work and they will look great. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-14-2011, 07:37 PM	#3 (permalink)
c41006 A True Z Fanatic Join Date: Oct 2010 Location: Atlanta Posts: 9,034 Drives: '10 G37 Coupe BO 7AT Rep Power: 114	Looks good

01-14-2011, 07:47 PM	#5 (permalink)
genki370z Base Member Join Date: May 2009 Location: Lemoore,California Posts: 236 Drives: 2009 370z silver 6mt Rep Power: 289	car looks damn good! do u have any rubbing issues running a 275 tire up front, im wondering cuz i am too plan on running some te37's and also currently dropped on H&R springs.

01-14-2011, 08:09 PM	#10 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Nice! 275 front isnt keeping the stock height ratio too much. Let us know if you have any issues with the vdc acting up. Nice setup though. I went similar. RE11 19X9.5 with 265, 19X10.5 with 305. Very Nice car.

01-14-2011, 08:13 PM	#11 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	the VDC is operating great. the VDC in this car is adaptive and will self learn to new ratios. I learned that thru experience. Previously, ran a setup that for the first 5 min couldn't drive straight down the road without the VDC kicking in and the car bucking. After a few min it recalibrated and was perfect for several months (and then i changed to this setup). __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-14-2011, 08:17 PM	#12 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	ok, cool. Good to know.

01-14-2011, 08:23 PM	#13 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	I like it, just add the stickers. Offset looks fine too IMO

01-14-2011, 08:34 PM	#14 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	Looks good. There's 19x10.5 +12. I thought the 11" were special order. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

01-14-2011, 10:32 PM	#15 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Beautiful!! Orderd my wheels today. But there not TE37's though. Love the hood. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS:BRAND NEW DPE SP-20 FULL POLISHED 19x11-6 19x13-17	Off*setZ	Parts for sale (Private Classifieds)	27	03-29-2011 01:45 PM
AGGRESSIVE OFFSETS HERE>>> SSR MS1 19x11-7 and 20x12.5 0	NoZYet	Parts for sale (Private Classifieds)	14	03-05-2011 03:51 PM
Te37sl?	Spec Jay	Wheels & Tires	86	11-03-2010 08:46 PM
Trade New AG Mesh 19x9.5 19x11 with new V12 tires	mattjk	Parts for sale (Private Classifieds)	14	09-18-2010 02:24 AM
19x11 Wheels possible?	carfr3ak	Wheels & Tires	18	10-07-2009 12:01 AM