What kind of spacers...

crazybeasty · 01-07-2011, 05:50 PM

Hey guys i need help I'm tired of looking at the gap between my wheels and my fender so i was wondering what kind of spacers i should run; size, tread pattern, etc. Also my front fenders aren't rolled so keep that in mind. My wheel size are 19x9.5 +24 front and 19x10.5 +15 rear. I have size 305/30/19 rear tires and 245/35/19 front tires so please give me some advice on what type of spacers i should run and what i need to know about it. Thank you

here are some pics of my car:

Front:

IMG_0973 by BigBadBao, on Flickr

Rear:

67180_185070954837932_100000050870491_681740_65266 30_n by BigBadBao, on Flickr

kenchan · 01-07-2011, 10:28 PM

Maybe 10 front 5 rear and lower it a tad more if you can. Do you not rub yet?

crazybeasty · 01-07-2011, 10:39 PM

Quote:

Originally Posted by kenchan

Maybe 10 front 5 rear and lower it a tad more if you can. Do you not rub yet?

yeah right now im not rubbing i cant go any lower cuz if i do my front will rub unless i roll it which im thinking about doing and 10 and 5 seems a bit small i was thinking around 15-20

Trips · 01-07-2011, 10:50 PM

From the pics it looks fine anymore spacing and you're going to need to roll those fenders or add Neg Camber? You may consider maybe coilovers to drop it a hair

crazybeasty · 01-16-2011, 01:39 PM

Quote:

Originally Posted by Triple's

From the pics it looks fine anymore spacing and you're going to need to roll those fenders or add Neg Camber? You may consider maybe coilovers to drop it a hair

lol thats the problem im already sitting on megan coilovers but ive been told if i go any lower i will rub and i do have rear camber kits i think i might just have to roll my front fenders and get some 10 front and 5 rear spacers

NISMOFO · 02-04-2011, 02:14 AM

Have you thought about doing a front camber kit first? Im waiting on SPL to release one. That would push the top on.your.front wheels out quite a bit right there. Your setup is very similar to mine. I have 305/30 rear on 11" but you have 2mm more wheel to the outside vs me in the rear. I was thinking of doing 10mm spacers rear. I have only -1.2 rear camber now but I think -1.4 is the max id like to run.

djpathfinder · 02-04-2011, 03:07 AM

I don't know... your spacing looks pretty close to dead on right now. Perhaps when you need to replace your front tires, you could go with a 255-265 and that will fill in the gap nicely.

Perhaps make sure the camber front and rear, is exactly what you want and then reconsider. Are you going for hellaflush?

ClemsonWill · 02-04-2011, 08:36 AM

Quote:

Originally Posted by djpathfinder

I don't know... your spacing looks pretty close to dead on right now. Perhaps when you need to replace your front tires, you could go with a 255-265 and that will fill in the gap nicely.
Perhaps make sure the camber front and rear, is exactly what you want and then reconsider. Are you going for hellaflush?

This is your best bet. Going with 10-15mm spacers is going to make the wheels poke out too much.

01-07-2011, 05:50 PM	#1 (permalink)
crazybeasty Enthusiast Member Join Date: Mar 2010 Location: West Palm Beach,Florida Posts: 249 Drives: 09 370z Rep Power: 15	What kind of spacers... Hey guys i need help I'm tired of looking at the gap between my wheels and my fender so i was wondering what kind of spacers i should run; size, tread pattern, etc. Also my front fenders aren't rolled so keep that in mind. My wheel size are 19x9.5 +24 front and 19x10.5 +15 rear. I have size 305/30/19 rear tires and 245/35/19 front tires so please give me some advice on what type of spacers i should run and what i need to know about it. Thank you here are some pics of my car: Front: IMG_0973 by BigBadBao, on Flickr Rear: 67180_185070954837932_100000050870491_681740_65266 30_n by BigBadBao, on Flickr __________________ "2 Fast To Live, 2 Young To Die"

01-07-2011, 10:50 PM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	From the pics it looks fine anymore spacing and you're going to need to roll those fenders or add Neg Camber? You may consider maybe coilovers to drop it a hair __________________

02-04-2011, 02:14 AM	#6 (permalink)
NISMOFO Enthusiast Member Join Date: Jan 2009 Location: McKinney, TX Posts: 269 Drives: 370Z Rep Power: 16	Have you thought about doing a front camber kit first? Im waiting on SPL to release one. That would push the top on.your.front wheels out quite a bit right there. Your setup is very similar to mine. I have 305/30 rear on 11" but you have 2mm more wheel to the outside vs me in the rear. I was thinking of doing 10mm spacers rear. I have only -1.2 rear camber now but I think -1.4 is the max id like to run. Last edited by NISMOFO; 02-04-2011 at 10:05 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fs: H&r 20mm rear spacers / 15mm front spacers	xbigb4ller69z	Parts for sale (Private Classifieds)	25	12-10-2010 01:20 PM
What kind of Z is this?	el'ation	Nissan 370Z General Discussions	12	11-01-2010 02:00 AM
What kind of rims is this?	Jquad	Wheels & Tires	4	10-11-2010 01:42 AM
Kind of new to this forum	dfresh713	The Lounge (Off Topic)	3	04-06-2010 06:56 PM
Kind of new to forum...	SF_Phantom	New Forum Member	2	01-13-2010 10:48 AM

01-07-2011, 10:28 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Maybe 10 front 5 rear and lower it a tad more if you can. Do you not rub yet?