i can get a close up for you some time today. just of the hub?

that would be great... just a couple shots all around the lug/hub area in the center of the wheel. i would like to see the opening where the centercap goes etc and see what i can determine before my wheels arrive. unfortunately without getting a precise inside diameter of the SLs hub, i cant really bother starting the CAD work.

just a heads up. im rockin a 20mm spacer with my 10.5 +12 te's +12 up front too. just dont expect a huge tire

thanks spec jay for the heads up. im not going to run spacers. i was going to but not anymore. im just goin to get the camber kit from lou

hope this helps phunk, not the best pix

front
http://img.photobucket.com/albums/v2...n/IMG_3244.jpg
http://img.photobucket.com/albums/v2...n/IMG_3249.jpg
http://img.photobucket.com/albums/v2...n/IMG_3246.jpg

rear
http://img.photobucket.com/albums/v2...n/IMG_3250.jpg
http://img.photobucket.com/albums/v2...n/IMG_3251.jpg


i know i need to paint the inside black, lol. just been lazy

you sure? haha
this is with the 20mm and -3 camber in the rear
http://img.photobucket.com/albums/v1...g?t=1292108773
im going back down to a 15mm so i can go wider with less camber

want to send me your 20mm so i can try them out :tup:

j/k

looks good though, i still dont think im going to run spacers. im just going to do the camber kit and go from there. i do want to put wider tires on as well

i guess you might be ok since you aren't running the +12 up front. sure makes me nervous about going with a 255 hahah

you will probably rub with a 255 up front no? i have a little room with the +22 up front and a 245/40. fully lock it rubs just a tiny little bit with my setup

i plan on rolling the lip flat on the front. im also running 5 series smaller. i only rub the fender liner.

thanks for the pictures!!

is that lip i see back in there, the edge of a hub centric ring?

NP! Yup that is the hub centric ring

excellent... since it is exposed on the inside of the hub opening, that means it will be no trouble to fit a one-piece centercap / hub ring in there!

Just in case you decide you want to try spacers :tup:

http://www.the370z.com/parts-sale-pr...acers-f-s.html

thanks holliday, im just going to fix my alignment though. and im going to be raising the car a little bit. we went on a canyon run and i was scraping everything, including "ant poop" as my fiance stated. i need to stiffen the coils up a bit and get some sways. i had some body roll. my front lip hit something as well and chipped the finish on it. it didnt crack the lip though thank god, just took the finish off which is fixable

Raise it we can tune the suspension then worry about sways. :tup:
Good times! Man that was a challenge on the way back down and those damn cow crossings and you having to cross them so slow...