[Official] 370z wheel fitment guide (pics/specs) only

AlWakRa · 10-31-2018, 05:21 AM

Wheels: Work MCO Racing White 18x10 +20 and 18x11 +18 (and rear 10mm spacers)
Tires: Toyo R888R 265/35/18 and 295/30/18
Coilover: Zeal Function X
Camber: didn't check, but front was around -3.3 and rear about -2.5
No fender modifications

The wheels was for a friend for track, I tested the fitment on my car (just one side) so the alignment setup were from my original setup.

Desert Rat · 11-13-2018, 03:31 PM

Can Tire Rack be trusted? I'm looking at a set of 20" wheels...they suggest a 285/30/20 for the back. That's a full inch wider than the stockers I have on 18s now. They say they'll fit my car. What says the experts? I don't want tire rub. Suspension is stock and will likely stay that way.

Fronts:

Size: 20x9
Offset: 20mm
245/35/20 tire

Rears:

Size: 20x10.5
Offset: 25mm
285/30/20 tire

OptionZero · 11-13-2018, 04:37 PM

Tire Rack's is flaming hot garbage that is super duper conservative. Their whole system is stupid, you can't browse by specific size and spec

The nismo runs 19x10.5 +23 with a 285/35/19. Your rears are essentially the same damn thing. Should be fine.

Hell, people use the 19x10.5 +12 fitment with 305 in the back without problems

Fronts will stick out about 14mm further than stock nismo (19x9.5 +40 with 245/40/19)

This MIGHT pose an issue.

Desert Rat · 11-14-2018, 10:49 AM

Quote:

Originally Posted by OptionZero

Tire Rack's is flaming hot garbage that is super duper conservative. Their whole system is stupid, you can't browse by specific size and spec

The nismo runs 19x10.5 +23 with a 285/35/19. Your rears are essentially the same damn thing. Should be fine.

Hell, people use the 19x10.5 +12 fitment with 305 in the back without problems

Fronts will stick out about 14mm further than stock nismo (19x9.5 +40 with 245/40/19)

This MIGHT pose an issue.

Any alignment changes needed? And on the fronts, is the fender lip where my concern would be?

OptionZero · 11-14-2018, 06:48 PM

370Z front alignment is not adjustable. You need the SPL Front Upper Control Arms, which are caster/camber adjustable.

Fender rolling isn't that hard, its like $40 a corner from a pro shop.

Rears . . . like i said, STOCK NISMO uses that same size

Desert Rat · 11-15-2018, 02:09 PM

thanks for the replies

Meow370z · 11-26-2018, 05:04 PM

Vossen vws-2

20x9.5 +32 in front 265/30/20 tires
20x11 +37/38 ( not sure ) 295/30/20

Any help/comments fitting them on 370z? Any problems? What to do? Will be running on hsd coils

OptionZero · 11-26-2018, 05:49 PM

no problems fitting

will look like hot garbage

refer to posts above yours

Bswanny · 12-22-2018, 09:47 AM

Will I have any problem with a Forgestar CF5V 19 x 9.5 SDC +12 up front fitting flush? I'm at stock ride height and want it as flush as possible. Thank you

Sent from my SAMSUNG-SM-G930A using Tapatalk

justin_boy · 12-22-2018, 11:12 AM

Quote:

Originally Posted by Bswanny

Will I have any problem with a Forgestar CF5V 19 x 9.5 SDC +12 up front fitting flush? I'm at stock ride height and want it as flush as possible. Thank you

Sent from my SAMSUNG-SM-G930A using Tapatalk

I used to run a 9.5 Et 15 and with stock camber it was poking, with -2.5 it was exactly flush. For reference they were wrapped in r888r 275/35/18. Just to let you know you would have to get really aggressive in the rear so it doesn’t look reverse staggered

OptionZero · 12-22-2018, 11:40 AM

Quote:

Originally Posted by Bswanny

Will I have any problem with a Forgestar CF5V 19 x 9.5 SDC +12 up front fitting flush? I'm at stock ride height and want it as flush as possible. Thank you

Sent from my SAMSUNG-SM-G930A using Tapatalk

It's gonna poke at stock height

Stop ******* around

Get coils and arms and drop the damn thing

Bswanny · 12-22-2018, 04:37 PM

Quote:

Originally Posted by OptionZero

It's gonna poke at stock height

Stop ******* around

Get coils and arms and drop the damn thing

It's a daily driver so no

Sent from my SAMSUNG-SM-G930A using Tapatalk

OptionZero · 12-22-2018, 05:24 PM

aint no reason you can't daily it

Bswanny · 12-23-2018, 10:20 AM

Quote:

Originally Posted by OptionZero

aint no reason you can't daily it

That statement says I can't daily drive it. You understand how the English language works, right?

Sent from my SAMSUNG-SM-G930A using Tapatalk

Rusty · 12-23-2018, 10:34 AM

Quote:

Originally Posted by Bswanny

That statement says I can't daily drive it. You understand how the English language works, right?

Sent from my SAMSUNG-SM-G930A using Tapatalk

He wants everything dropped.

11-13-2018, 04:37 PM	#258 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,218 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Tire Rack's is flaming hot garbage that is super duper conservative. Their whole system is stupid, you can't browse by specific size and spec The nismo runs 19x10.5 +23 with a 285/35/19. Your rears are essentially the same damn thing. Should be fine. Hell, people use the 19x10.5 +12 fitment with 305 in the back without problems Fronts will stick out about 14mm further than stock nismo (19x9.5 +40 with 245/40/19) This MIGHT pose an issue. Desert Rat likes this. __________________ OptionZero Build Thread

11-14-2018, 06:48 PM	#260 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,218 Drives: 15 370Z Nismo 6MT Rep Power: 214100	370Z front alignment is not adjustable. You need the SPL Front Upper Control Arms, which are caster/camber adjustable. Fender rolling isn't that hard, its like $40 a corner from a pro shop. Rears . . . like i said, STOCK NISMO uses that same size __________________ OptionZero Build Thread

11-26-2018, 05:49 PM	#263 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,218 Drives: 15 370Z Nismo 6MT Rep Power: 214100	no problems fitting will look like hot garbage refer to posts above yours __________________ OptionZero Build Thread

12-22-2018, 05:24 PM	#268 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,218 Drives: 15 370Z Nismo 6MT Rep Power: 214100	aint no reason you can't daily it Hotrodz, Spooler and Memphis370Z like this. __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z General Discussions	32	02-20-2012 01:14 AM
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	24	09-21-2011 11:10 AM
Are these the perfect wheel specs for a 370Z?	Juruki	Wheels & Tires	22	05-14-2010 11:18 AM
Official Formula 1 2010 Thread: Shanghai International Circuit guide	AK370Z	Track / Autocross / Drifting / Dragstrip	20	04-21-2010 09:18 PM
2009 Nissan 370Z Specs (Official Specifications) Released on 11.19.08	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 10:15 PM

11-13-2018, 03:31 PM	#257 (permalink)
Desert Rat Base Member Join Date: Jun 2016 Location: Mesa, AZ Posts: 189 Drives: 2014 370Z M6 Base Rep Power: 3365	Can Tire Rack be trusted? I'm looking at a set of 20" wheels...they suggest a 285/30/20 for the back. That's a full inch wider than the stockers I have on 18s now. They say they'll fit my car. What says the experts? I don't want tire rub. Suspension is stock and will likely stay that way. Fronts: Size: 20x9 Offset: 20mm 245/35/20 tire Rears: Size: 20x10.5 Offset: 25mm 285/30/20 tire

11-15-2018, 02:09 PM	#261 (permalink)
Desert Rat Base Member Join Date: Jun 2016 Location: Mesa, AZ Posts: 189 Drives: 2014 370Z M6 Base Rep Power: 3365	thanks for the replies

11-26-2018, 05:04 PM	#262 (permalink)
Meow370z Base Member Join Date: May 2018 Location: Ontario Posts: 1 Drives: 17 370z Yellow MT Rep Power: 7	Vossen vws-2 20x9.5 +32 in front 265/30/20 tires 20x11 +37/38 ( not sure ) 295/30/20 Any help/comments fitting them on 370z? Any problems? What to do? Will be running on hsd coils

12-22-2018, 09:47 AM	#264 (permalink)
Bswanny Base Member Join Date: Mar 2018 Location: New Mexico Posts: 135 Drives: 20 370Z Sport Rep Power: 7	Will I have any problem with a Forgestar CF5V 19 x 9.5 SDC +12 up front fitting flush? I'm at stock ride height and want it as flush as possible. Thank you Sent from my SAMSUNG-SM-G930A using Tapatalk