[Official] 370z wheel fitment guide (pics/specs) only

///maestro · 02-16-2015, 09:33 PM

bump :-)

KittenMittens · 02-16-2015, 09:54 PM

Quote:

Originally Posted by Dallaz

Specs:
Vossen CV3's
Front 20x9 +20 245/30/20
Rear 20x10.5 +15 285/30/20
Powertrix Coilovers ~1 1/4" drop
No spacers
No Camber adjustments

Exact setup I've wanted!

Thanks for the bump.

kazman · 02-18-2015, 07:02 PM

Quote:

Originally Posted by Onikage_87

2) SSR Professor MS3 in SBC Super Black Coat
3) 19X9.5+25HP (Hyper Disk), 19X10.5NR (Normal Disk)
4) Michelin Pilot Super Sports
5) 265/35/19, 305/30/19
6) KW V3 lowered just less than 1" still on factory KW damper and rebound settings
7) Eibach/ SPC set to 0 degrees camber
8) Fenders: Still untouched and no rubbing or clearance issues at all with a flush kinda look

pm sent

Vic 370z · 03-03-2015, 12:12 AM

Ok great thread , so I'm looking for some advice maybe some ideas , im going to run F- 20×10 +22 275/30/20 R- 20×11 +17 305/30/20 and trying to figure out what kind of drop to go with don't want to fender roll/pull but want to clear the gap between fender and tire can some one help me figure this out ... thanks 370z.com

Chasingstatus · 03-26-2015, 06:11 PM

Forgestar F14's painted white with limited edition red center caps
19x10 +20 w 255/35/19
19x11.5 +25 295/30/19
Hankook ventus V12 Evo 2
Ark gt-f lowering springs
No roll or pulling on the fenders the tires fit really perfect actually.
I just took it off of the jack stands about 5 minutes before I took these pics. I am hoping the springs will settle a bit more and possibly go a bit lower. Either way I would like to grab up some coils in a big but I have to focus on clutch/flywheel and a CSC fix before I can buy any though.

kentstuh · 04-09-2015, 05:16 PM

Work VS-XX Step Lips / Matte Black face - Anodized Gloss Black barrel - Gold hardware

Front: 19x9.5 +23 / 5x114 [T-Disk] Rear: 19x10.5 +19 / 5x114 [A-Disk]

Hankooks V12 Evo2 F:265/35/19 R:305/30/19

Dropped on Swifts Spec R

Camber OE

No need for fender work.

No rubbing issue at all.

Had to use 10mm spacer [H&R DRS] for the rear.

Ryguy · 04-20-2015, 03:20 PM

Work Emotion CR Ultimate with a matte Bronze finish

F: 19x9.5 +25
R: 19x10.5 +22

Michelin Pilot Sport A/S 3

F: 255/40/19
R: 285/35/19

Stock suspension

Stock Camber settings

Stock Fenders (no modification)

When I need new tires I will probably go with a 295 tire in the rear. The 285 fits fine, but I personally think a 295 will look a little more flush. I may feel different when I get coilovers and lower the car a bit. The front sticks out slightly but it isn't very much at all. I was told Work recommended to go with the +15 offset in the front, I am really happy I stuck with the +25.

fire165 · 04-24-2015, 02:37 PM

Owners with sport package.
If you have 19×9.5 up front, what offset clears the big brakes??
Thinking of +12 or lower, but no idea if it'd clear.
Thank you.

Bananaz · 04-24-2015, 09:03 PM

Depends on the spokes it's not always offset but usually +15 or lower always clears

Ryguy · 04-24-2015, 09:07 PM

I don't have the sport package but I was told that I would need at least +25 to clear the sport brakes with Work's Emotion CR Ultimate.

gstraw · 04-29-2015, 05:20 AM

Not seen any people running 19 front and 20 rears. I'm thinking of this since my front looks great with 19 but rears look lost. Plus extra wall on the front helps with comfort!

Sent from my iPhone using Tapatalk

chingster · 05-16-2015, 11:02 PM

Been lurking the370z for years, first-time poster now that I have my Z!

Needed some advice on my situation:

Currently looking at a really good deal consisting of 4 Vertini Drift rims, but thing is they are all the same size at 19x9.5. I noticed almost everyone in this thread has there rear rims bigger at 10.5+. Are there any drawbacks for putting on all of the same size rim other than the deeper/concave look on the rears?

For tires I was then going to put 245/45/R19 on the front and 285/45/R19 in the rears.

Not sure if I need spacers or not to make the wheels flush with the car.

Does my plan make sense? Could I do 295s on the rears as well?

Thanks everyone!

AntiVenom · 05-17-2015, 10:44 AM

Quote:

Originally Posted by chingster

Been lurking the370z for years, first-time poster now that I have my Z!

Needed some advice on my situation:

Currently looking at a really good deal consisting of 4 Vertini Drift rims, but thing is they are all the same size at 19x9.5. I noticed almost everyone in this thread has there rear rims bigger at 10.5+. Are there any drawbacks for putting on all of the same size rim other than the deeper/concave look on the rears?

For tires I was then going to put 245/45/R19 on the front and 285/45/R19 in the rears.

Not sure if I need spacers or not to make the wheels flush with the car.

Does my plan make sense? Could I do 295s on the rears as well?

Thanks everyone!

This question probably belongs in the "will it fit?" thread for what it's worth. So, I answered it over here Will it Fit? Thread

AntiVenom · 05-17-2015, 11:03 AM

Quote:

Originally Posted by gstraw

Not seen any people running 19 front and 20 rears. I'm thinking of this since my front looks great with 19 but rears look lost. Plus extra wall on the front helps with comfort!

I've wondered about this as well. I think it would work well with our thinner front fenders and the more bulky rear fenders. We just need a guinea pig...

Not it!

RayMaN · 05-20-2015, 10:55 AM

Anyone have any similar to these? Love the 6/7 spoke wheels..

uploadfromtaptalk1432133678178.jpg
uploadfromtaptalk1432133686148.jpg

02-16-2015, 09:33 PM	#121 (permalink)
///maestro Track Member Join Date: Dec 2014 Location: Grand Rapids, MI Posts: 530 Drives: 11' 370z\|09' BMW M3 Rep Power: 12	bump :-) __________________ Gallo24 swapped 370z Instagram: @z34_motorsport

04-20-2015, 03:20 PM	#127 (permalink)
Ryguy Base Member Join Date: Feb 2013 Location: Oak Harbor, WA Posts: 186 Drives: 11 Nissan 370z white Rep Power: 12	Work Emotion CR Ultimate with a matte Bronze finish F: 19x9.5 +25 R: 19x10.5 +22 Michelin Pilot Sport A/S 3 F: 255/40/19 R: 285/35/19 Stock suspension Stock Camber settings Stock Fenders (no modification) When I need new tires I will probably go with a 295 tire in the rear. The 285 fits fine, but I personally think a 295 will look a little more flush. I may feel different when I get coilovers and lower the car a bit. The front sticks out slightly but it isn't very much at all. I was told Work recommended to go with the +15 offset in the front, I am really happy I stuck with the +25. __________________ 11 PW base 370z w/ Z1 25 row oil cooler, K&N typhoon short ram intake, Megan racing drift spec catback, Z1 CSC Elimination kit, Work Emotion CR Ultimate, akebono sport calipers, DBA rotors

04-24-2015, 09:03 PM	#129 (permalink)
Bananaz Track Member Join Date: Dec 2013 Location: Central Jersey Posts: 637 Drives: 09 370z 6MT/B+Sport Rep Power: 14	Depends on the spokes it's not always offset but usually +15 or lower always clears fire165 likes this. __________________ BC - SSR - Evo-R - ViS - SPC - ZSpeed - Beluga - Blox - 35% Tint - Clutch Spring - Fang Forced Air Ducting

04-24-2015, 09:07 PM	#130 (permalink)
Ryguy Base Member Join Date: Feb 2013 Location: Oak Harbor, WA Posts: 186 Drives: 11 Nissan 370z white Rep Power: 12	I don't have the sport package but I was told that I would need at least +25 to clear the sport brakes with Work's Emotion CR Ultimate. fire165 likes this. __________________ 11 PW base 370z w/ Z1 25 row oil cooler, K&N typhoon short ram intake, Megan racing drift spec catback, Z1 CSC Elimination kit, Work Emotion CR Ultimate, akebono sport calipers, DBA rotors

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z General Discussions	32	02-20-2012 02:14 AM
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	24	09-21-2011 12:10 PM
Are these the perfect wheel specs for a 370Z?	Juruki	Wheels & Tires	22	05-14-2010 12:18 PM
Official Formula 1 2010 Thread: Shanghai International Circuit guide	AK370Z	Track / Autocross / Drifting / Dragstrip	20	04-21-2010 10:18 PM
2009 Nissan 370Z Specs (Official Specifications) Released on 11.19.08	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 11:15 PM

03-03-2015, 12:12 AM	#124 (permalink)
Vic 370z Base Member Join Date: Sep 2014 Location: San jose Ca Posts: 69 Drives: 14 Nissan 370z Rep Power: 11	Ok great thread , so I'm looking for some advice maybe some ideas , im going to run F- 20×10 +22 275/30/20 R- 20×11 +17 305/30/20 and trying to figure out what kind of drop to go with don't want to fender roll/pull but want to clear the gap between fender and tire can some one help me figure this out ... thanks 370z.com

04-24-2015, 02:37 PM	#128 (permalink)
fire165 Base Member Join Date: Jan 2014 Location: Chicago burbs. Posts: 241 Drives: 14.370Z. Auto Sport Rep Power: 13	Owners with sport package. If you have 19×9.5 up front, what offset clears the big brakes?? Thinking of +12 or lower, but no idea if it'd clear. Thank you.

04-29-2015, 05:20 AM	#131 (permalink)
gstraw Base Member Join Date: Feb 2014 Location: Glasgow, UK Posts: 85 Drives: Celica Rep Power: 11	Not seen any people running 19 front and 20 rears. I'm thinking of this since my front looks great with 19 but rears look lost. Plus extra wall on the front helps with comfort! Sent from my iPhone using Tapatalk

05-16-2015, 11:02 PM	#132 (permalink)
chingster Base Member Join Date: Apr 2014 Location: Toronto Posts: 10 Drives: 09 Nissan 370Z BK M6 Rep Power: 11	Been lurking the370z for years, first-time poster now that I have my Z! Needed some advice on my situation: Currently looking at a really good deal consisting of 4 Vertini Drift rims, but thing is they are all the same size at 19x9.5. I noticed almost everyone in this thread has there rear rims bigger at 10.5+. Are there any drawbacks for putting on all of the same size rim other than the deeper/concave look on the rears? For tires I was then going to put 245/45/R19 on the front and 285/45/R19 in the rears. Not sure if I need spacers or not to make the wheels flush with the car. Does my plan make sense? Could I do 295s on the rears as well? Thanks everyone!

05-20-2015, 10:55 AM	#135 (permalink)
RayMaN Base Member Join Date: Apr 2014 Location: Florida Posts: 128 Drives: 09 Nissan 370Z BK M6 Rep Power: 11	Anyone have any similar to these? Love the 6/7 spoke wheels.. uploadfromtaptalk1432133678178.jpg uploadfromtaptalk1432133686148.jpg