[Official] 370z wheel fitment guide (pics/specs) only

Neek · 04-27-2018, 11:35 AM

Quote:

Originally Posted by cdhtang

What is ur suspension setup? And do u have picture to show the flushness of the wheels?

I'm just lowered on Stance GR+ coils, with the spc rear camber kit, and the spl front upper control arms. There are no rubbing issues or issues turning full radius.

Rear side view for flushness

Front side view

Rear wheel gap

Front wheel gap

kpic · 05-08-2018, 02:34 AM

09 GTR Premium Wheels

20x9.5 +25
20x10.5 +45

Michelin Pilot Super Sports

255/40R/20
285/35R/20

Tein S Tech's
SPC Front and Rear Camber kits - camber withing stock limits

25lbs front, 27lbs rear

Had to trim front fender liners where the fender attaches to the bumper otherwise no interference.

Not flush, but i'll never run spacers again after using them on the base 18's. So much more grip than stock Yoko's, not much louder either.

gtr rims2.jpg
gtr 3.jpg

OptionZero · 05-08-2018, 12:57 PM

Quote:

Originally Posted by Neek

TE37 SL
19x9.5 +22 F
19x10.5 +12 R

Michelin 4S
265/35/19 F
305/30/19 R

This is the wheel setup that should be everyone's baseline to work off of

cupcakez · 05-08-2018, 07:25 PM

I have a:
370z || Base Model || 7AT || 2015 Vehicle

OEM Tires and Rims

I am thinking about changing out the tires for better ones, but I could care less about the rims.

Would someone be able to help me confirm or not if:
305/35/19 sized tires would replace the two rear tires, and if I could still use the OEM rims on these or no?

Please and thank you!

Rusty · 05-08-2018, 08:07 PM

Quote:

Originally Posted by cupcakez

I have a:
370z || Base Model || 7AT || 2015 Vehicle

OEM Tires and Rims

I am thinking about changing out the tires for better ones, but I could care less about the rims.

Would someone be able to help me confirm or not if:
305/35/19 sized tires would replace the two rear tires, and if I could still use the OEM rims on these or no?

Please and thank you!

What is your front tire size? The 305/35-19 tire is about 27.4" tall.

Zerafian · 05-08-2018, 08:15 PM

Quote:

Originally Posted by OptionZero

This is the wheel setup that should be everyone's baseline to work off of

only thing better would be to get the camber and ride height compared to stock.

cv129 · 05-08-2018, 08:24 PM

Quote:

Originally Posted by cupcakez

I have a:
370z || Base Model || 7AT || 2015 Vehicle

OEM Tires and Rims

I am thinking about changing out the tires for better ones, but I could care less about the rims.

Would someone be able to help me confirm or not if:
305/35/19 sized tires would replace the two rear tires, and if I could still use the OEM rims on these or no?

Please and thank you!

Base wheels are 18" in diameter, so 19" won't fit.

And, 305/35 is too wide for base 9" rear rim.

cupcakez · 05-08-2018, 08:42 PM

Quote:

Originally Posted by cv129

Base wheels are 18" in diameter, so 19" won't fit.

And, 305/35 is too wide for base 9" rear rim.

Darn it.
So I would need to change BOTH the rims and tires then...

Ugh.
Okay thank you.

Hotrodz · 05-09-2018, 08:54 AM

Quote:

Originally Posted by cupcakez

Darn it.
So I would need to change BOTH the rims and tires then...

Ugh.
Okay thank you.

Let's not throw the baby out with the bath water. Are you wanting to run a drag radial as a 305/35/18 will work on the rear a stock height. You probably need 10" rim width. Most run a 19" wheel up front to get a tire height that is close to the rear.

cupcakez · 05-09-2018, 03:00 PM

Okay. You are right. I can go 10.5" to 11.5" rim width for the 305 35 19 tires in the rear

igota21incher · 06-17-2018, 10:47 PM

Thanks to all for helping guide me with my wheel/tire/suspension upgrades!

Work Cr2p 19x9.5 +15 (f); 19x11 +13 (r)
Michelin Pilot Sport 4s 255/35/19 (f); 305/30/19 (r)
KW v3 set to factory dampening setting
SPC front and rear camber kit
Two finger gap; will drop another 1/4-1/2" once springs settle
Alignment is more or less within spec; could use minor castor adjustment
No fender mod, no rubbing (even at high speed over moderate bump)
Front pokes a tad more than back but still more or less flush
Front tire has a very minimal stretch, while back is fully square
Would not go any lower; this setup has the ideal look/functionality balance

Zerafian · 06-20-2018, 08:38 AM

Work XSA04c

20/10 +10(r disk)
20/11.5 +10(w disk)

Michelin PSS 255/35 front, 305/30 rear

Stance XR coils(true style) SPL rear camber and toe arms. SPC front control arms

Fenders still stock. I get some rubbing up front on incline roads when wheel is angled into a turn. Rolling the front fenders, NOT pulling, would fix the issue.

Cant put my pinky between the tire and fender of the front or the back

Alignment settings as of yesterday

Pics

paracin · 07-29-2018, 09:59 PM

This is a classic and comfortable fit for a daily. Very happy with the offsets. Inconspicuous and fairly flush. Cheap tyres due to the common sizes.
1) Pics - see links below
2) Work Emotion Kiwami AHG (bronze)
3) 19x9.5 +25 / 19x10.5 +12
4) Dunlop Sportmaxx 050+
5) 275/35R19 / 245/40R19
6) Standard suspension
7) Standard camber
8) Standard fenders
10) Perfect fit
11) Flush fit, almost perfect. Will review the tyre sizes once I install coilovers.
12) Haven’t weighed the wheels, sorry.

justin_boy · 10-23-2018, 06:57 PM

Quote:

Originally Posted by abm89

2) Enkei RPF1 - F1 Silver
3) F:18x9.5 +15 R:18x10.5 +15
4) Bridgestone RE-11
5) F:265/35R18 R:275/35R18
6) BC Racing BR Coilovers (Standard Springs)
7) -2.4 degrees camber "square"
8) Stock Fenders
11) Aggressive front setup. Wheels do not rub and will tuck under extreme loads.

wow just wow

mini_cal · 10-30-2018, 11:37 AM

Just put on my winter setup.

Running 245/45/R18 Michelin X-Ice Xi3 in all 4 corners.
18x9" ET25, with 20mm spacers in the rear.

Fills in the wheel wells pretty good, no rubbing that I am aware of.

05-08-2018, 02:34 AM	#242 (permalink)
kpic Base Member Join Date: Apr 2016 Location: Victoria BC Posts: 22 Drives: 2009 370Z Rep Power: 9	09 Touring 09 GTR Premium Wheels 20x9.5 +25 20x10.5 +45 Michelin Pilot Super Sports 255/40R/20 285/35R/20 Tein S Tech's SPC Front and Rear Camber kits - camber withing stock limits 25lbs front, 27lbs rear Had to trim front fender liners where the fender attaches to the bumper otherwise no interference. Not flush, but i'll never run spacers again after using them on the base 18's. So much more grip than stock Yoko's, not much louder either. gtr rims2.jpg gtr 3.jpg Nixin likes this. Last edited by kpic; 05-08-2018 at 02:41 AM.

06-17-2018, 10:47 PM	#251 (permalink)
igota21incher Base Member Join Date: Dec 2008 Location: new york Posts: 100 Drives: 07 civic Rep Power: 17	Thanks to all for helping guide me with my wheel/tire/suspension upgrades! Work Cr2p 19x9.5 +15 (f); 19x11 +13 (r) Michelin Pilot Sport 4s 255/35/19 (f); 305/30/19 (r) KW v3 set to factory dampening setting SPC front and rear camber kit Two finger gap; will drop another 1/4-1/2" once springs settle Alignment is more or less within spec; could use minor castor adjustment No fender mod, no rubbing (even at high speed over moderate bump) Front pokes a tad more than back but still more or less flush Front tire has a very minimal stretch, while back is fully square Would not go any lower; this setup has the ideal look/functionality balance Memphis370Z, Neek, Omnibeelzemo and 1 others like this.

06-20-2018, 08:38 AM	#252 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,344 Drives: 13' MB 370z Rep Power: 30949	Work XSA04c 20/10 +10(r disk) 20/11.5 +10(w disk) Michelin PSS 255/35 front, 305/30 rear Stance XR coils(true style) SPL rear camber and toe arms. SPC front control arms Fenders still stock. I get some rubbing up front on incline roads when wheel is angled into a turn. Rolling the front fenders, NOT pulling, would fix the issue. Cant put my pinky between the tire and fender of the front or the back Alignment settings as of yesterday Pics NorthStyle and confuser like this. __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t

10-30-2018, 11:37 AM	#255 (permalink)
mini_cal Base Member Join Date: Aug 2018 Location: Toronto, Ontario Posts: 64 Drives: 19 370Z Heritage Rep Power: 7	Just put on my winter setup. Running 245/45/R18 Michelin X-Ice Xi3 in all 4 corners. 18x9" ET25, with 20mm spacers in the rear. Fills in the wheel wells pretty good, no rubbing that I am aware of. 1UPZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z General Discussions	32	02-20-2012 02:14 AM
Nissan 370Z Official Specs Released from Nissan 11.15.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	24	09-21-2011 12:10 PM
Are these the perfect wheel specs for a 370Z?	Juruki	Wheels & Tires	22	05-14-2010 12:18 PM
Official Formula 1 2010 Thread: Shanghai International Circuit guide	AK370Z	Track / Autocross / Drifting / Dragstrip	20	04-21-2010 10:18 PM
2009 Nissan 370Z Specs (Official Specifications) Released on 11.19.08	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 11:15 PM

05-08-2018, 07:25 PM	#244 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	I have a: 370z \|\| Base Model \|\| 7AT \|\| 2015 Vehicle OEM Tires and Rims I am thinking about changing out the tires for better ones, but I could care less about the rims. Would someone be able to help me confirm or not if: 305/35/19 sized tires would replace the two rear tires, and if I could still use the OEM rims on these or no? Please and thank you!

05-09-2018, 03:00 PM	#250 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	Okay. You are right. I can go 10.5" to 11.5" rim width for the 305 35 19 tires in the rear

07-29-2018, 09:59 PM	#253 (permalink)
paracin Base Member Join Date: Nov 2015 Location: Australia Posts: 1 Drives: Volvo S40 T4 Rep Power: 10	This is a classic and comfortable fit for a daily. Very happy with the offsets. Inconspicuous and fairly flush. Cheap tyres due to the common sizes. 1) Pics - see links below 2) Work Emotion Kiwami AHG (bronze) 3) 19x9.5 +25 / 19x10.5 +12 4) Dunlop Sportmaxx 050+ 5) 275/35R19 / 245/40R19 6) Standard suspension 7) Standard camber 8) Standard fenders 10) Perfect fit 11) Flush fit, almost perfect. Will review the tyre sizes once I install coilovers. 12) Haven’t weighed the wheels, sorry.