I don't normally powdercoat wheels, but....

Mike · 03-24-2011, 09:55 PM

glad you like them Ron,

and as an FYI, tj wanted a couple extras since he perfected his installation, and even though I throw in a couple extra to begin with, two more are headed his way tomorrow. When you buy from me, its a lifetime mod, without additional charges for replacements down the road.

Ron · 03-24-2011, 10:02 PM

can I get a replacement set but this time in white letters lol jk. I am planning on powder coating the wheels and will buy again from you when I do.

Mike · 03-24-2011, 10:10 PM

I'll take care of you!

Red__Zed · 03-24-2011, 10:27 PM

Lettering on the rims looks amazing.

Gunzero · 03-25-2011, 01:46 AM

great skill :0

ZPirate · 03-25-2011, 08:48 AM

Quote:

Originally Posted by Mike

Zpirate, sure, no problem. just paypal the 25 to sales@thepowdercoater.com and I will cut them tomorrow.

Thanks Mike. The funds are on the way.

chops · 03-25-2011, 04:40 PM

Quote:

Originally Posted by Mike

glad you like them Ron,

and as an FYI, tj wanted a couple extras since he perfected his installation, and even though I throw in a couple extra to begin with, two more are headed his way tomorrow. When you buy from me, its a lifetime mod, without additional charges for replacements down the road.

aw man, you sold me.

give me a paypal address and ill send over a payment

Mike · 03-25-2011, 08:27 PM

Quote:

Originally Posted by chops

aw man, you sold me.

give me a paypal address and ill send over a payment

sales@thepowdercoater.com

Thanks!

ZPirate · 03-31-2011, 01:57 PM

Mike,

I received the Nismo vinyl pieces today. What is the best way to put them on?

I did one wheel while I was home at lunch. I cleaned the surface first with water and a cloth. Then I dried it with another cloth. Next I applied a lite mist of water so that I could move the vinyl pieces around once I put them on the wheel. Once I got them in place I padded them dry with a cloth. Would using a hair dryer rather than a mist of water help the process? Thanks for your assistance.

tjlazer · 03-31-2011, 02:24 PM

Quote:

Originally Posted by ZPirate

Mike,

I received the Nismo vinyl pieces today. What is the best way to put them on?

I did one wheel while I was home at lunch. I cleaned the surface first with water and a cloth. Then I dried it with another cloth. Next I applied a lite mist of water so that I could move the vinyl pieces around once I put them on the wheel. Once I got them in place I padded them dry with a cloth. Would using a hair dryer rather than a mist of water help the process? Thanks for your assistance.

I found this was the best way to do it. Just clean the wheels real well and dry. Then remove the letter, and use a razor blade to position the letter on as perfect as you can and press it on with your fingers. Just lightly stick the letter at the furthest edge of the blade so you can easily remove it from the blade when you stick it on. If the letter is not on right, you can remove it and re-apply. The razor blade works great for this as you can use the blade to carefully lift up the edge and remove.

ZPirate · 03-31-2011, 03:05 PM

Quote:

Originally Posted by tjlazer

I found this was the best way to do it. Just clean the wheels real well and dry. Then remove the letter, and use a razor blade to position the letter on as perfect as you can and press it on with your fingers. Just lightly stick the letter at the furthest edge of the blade so you can easily remove it from the blade when you stick it on. If the letter is not on right, you can remove it and re-apply. The razor blade works great for this as you can use the blade to carefully lift up the edge and remove.

Thanks TJ. I was using my exacto knife to do just what you are describing about the razor blade on the first wheel. I'll try that without using any water on the next wheel and see how it works. I just had a hard time on the first wheel getting the vinyl exactly where I wanted it. The wheel being slightly wet helped me better move it just where I wanted it.

Rogue370z · 03-31-2011, 07:03 PM

Quote:

Originally Posted by tjlazer

I found this was the best way to do it. Just clean the wheels real well and dry. Then remove the letter, and use a razor blade to position the letter on as perfect as you can and press it on with your fingers. Just lightly stick the letter at the furthest edge of the blade so you can easily remove it from the blade when you stick it on. If the letter is not on right, you can remove it and re-apply. The razor blade works great for this as you can use the blade to carefully lift up the edge and remove.

Lookin' real nice

ZPirate · 04-03-2011, 11:04 AM

Here are my Nismo wheels with Mike's lettering. My wheels aren't very clean, but you can see what the vinyl lettering does for them.

torpedo2k · 04-16-2011, 11:10 AM

Man those are going to screw up you wheel balance...

JK

Mike, I want a set!

Mike · 04-16-2011, 08:54 PM

25 to sales@thepowdercoater.com and they will be on their way to you!

03-24-2011, 09:55 PM	#76 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	glad you like them Ron, and as an FYI, tj wanted a couple extras since he perfected his installation, and even though I throw in a couple extra to begin with, two more are headed his way tomorrow. When you buy from me, its a lifetime mod, without additional charges for replacements down the road. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

03-24-2011, 10:10 PM	#78 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I'll take care of you! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

03-25-2011, 01:46 AM	#80 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	great skill :0 __________________

03-31-2011, 01:57 PM	#84 (permalink)
ZPirate Track Member Join Date: Dec 2008 Location: Greenville, NC Posts: 792 Drives: 09' 370Z & 03' 350Z Rep Power: 17	Mike, I received the Nismo vinyl pieces today. What is the best way to put them on? I did one wheel while I was home at lunch. I cleaned the surface first with water and a cloth. Then I dried it with another cloth. Next I applied a lite mist of water so that I could move the vinyl pieces around once I put them on the wheel. Once I got them in place I padded them dry with a cloth. Would using a hair dryer rather than a mist of water help the process? Thanks for your assistance. __________________ 2003 Daytona Blue 350Z Touring/Nismo 2009 Platinum Graphite 370Z Touring/Sport (Sold) 2009 BMW 135i/Dinan Stage 2 software upgrade/M3 suspension piecies/Koni Sports/ETS FMIC/Alufelgen SF-71 wheels

04-03-2011, 11:04 AM	#88 (permalink)
ZPirate Track Member Join Date: Dec 2008 Location: Greenville, NC Posts: 792 Drives: 09' 370Z & 03' 350Z Rep Power: 17	Here are my Nismo wheels with Mike's lettering. My wheels aren't very clean, but you can see what the vinyl lettering does for them. __________________ 2003 Daytona Blue 350Z Touring/Nismo 2009 Platinum Graphite 370Z Touring/Sport (Sold) 2009 BMW 135i/Dinan Stage 2 software upgrade/M3 suspension piecies/Koni Sports/ETS FMIC/Alufelgen SF-71 wheels

03-24-2011, 10:02 PM	#77 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	can I get a replacement set but this time in white letters lol jk. I am planning on powder coating the wheels and will buy again from you when I do.

03-24-2011, 10:27 PM	#79 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	Lettering on the rims looks amazing.

04-16-2011, 11:10 AM	#89 (permalink)
torpedo2k Enthusiast Member Join Date: Dec 2010 Location: Atlanta, Ga Posts: 396 Drives: 370 NISMO Rep Power: 14	Man those are going to screw up you wheel balance... JK Mike, I want a set!

04-16-2011, 08:54 PM	#90 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	25 to sales@thepowdercoater.com and they will be on their way to you! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
19" Stock Rays wheels powdercoat project	Phimosis	Wheels & Tires	84	09-03-2015 09:55 AM
powdercoat or paint?	SophiaZ	Wheels & Tires	10	09-21-2010 08:33 AM
should i powdercoat my wheels	DAGRACING	Exterior & Interior	24	07-10-2010 12:05 AM
Powdercoat or Paint?	Ty Weezy	Mid-Atlantic Region	3	06-17-2010 04:35 PM
Wheel repair and powdercoat	the_student	Northern California Region	4	05-08-2010 09:53 PM