Enkei RPF1's

OMGWTFBBQ · 08-17-2010, 10:07 PM

Quote:

Originally Posted by cossie1600

My 9.5" wheel with 35 offset sticks past the fender slightly, it didn't rub with 265 race rubber.

Have you tried rolling the front fenders? Maybe trimming the fender lining and relocating the bumper tab? Just a suggestion.

Red__Zed · 08-17-2010, 10:23 PM

Quote:

Originally Posted by Mike

search for my posts in the wheel forum. I did try this wheel and it didn't work but it was over a year ago and I don't remember the specs. They are in my thread though. They may have new fitments since then also.

I think I found the thread you are talking about. They were pretty high offset. I also have a non-sport model, so no worries on clearing the Akebonos for me.

cossie1600 · 08-17-2010, 10:49 PM

Quote:

Originally Posted by OMGWTFBBQ

Have you tried rolling the front fenders? Maybe trimming the fender lining and relocating the bumper tab? Just a suggestion.

It didn't rub when I autox last week, I have a set of 285 that i want to try out, I just don't want to waste money mounting and balancing tires unless I know it works.

Maxi · 05-06-2012, 11:16 AM

Quote:

Originally Posted by cossie1600

It didn't rub when I autox last week, I have a set of 285 that i want to try out, I just don't want to waste money mounting and balancing tires unless I know it works.

Cossie you have +35 18" RPF1:s?

Did these clear akebono brakes in front? I am just wondering that there are different experiences about fitments with these wheels..

FuszNissan · 05-07-2012, 12:26 PM

18x9+35 will not clear the Akebono's maybe 18x10+35

I would really suggest 18x9.5, 18x10.5 + 15 all around.

Read T · 01-06-2013, 04:36 PM

Can anyone confirm that 18x10 + 35 will clear Akebonos? I want to run same wheels/tires on all corners for the track so I can rotate.

littlejuanito · 10-08-2017, 10:35 AM

Quote:

Originally Posted by Read T

Can anyone confirm that 18x10 + 35 will clear Akebonos? I want to run same wheels/tires on all corners for the track so I can rotate.

.

Hotrodz · 10-11-2017, 12:28 AM

I run NT03 at +30 with no problem...I run a 15mm spacer on the rear. You can always add a spacer to get the clearance needed if the don't fit. Some run +15 square.

05-07-2012, 12:26 PM	#35 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	18x9+35 will not clear the Akebono's maybe 18x10+35 I would really suggest 18x9.5, 18x10.5 + 15 all around. carlitos_370z likes this. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

01-06-2013, 04:36 PM	#36 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 18	Can anyone confirm that 18x10 + 35 will clear Akebonos? I want to run same wheels/tires on all corners for the track so I can rotate. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

10-11-2017, 12:28 AM	#38 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I run NT03 at +30 with no problem...I run a 15mm spacer on the rear. You can always add a spacer to get the clearance needed if the don't fit. Some run +15 square. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WEDS & ENKEI SPRING-TO-SUMMER SALE l RPF1'S, NT03'S, SA55M'S!	DriveLineEric	Tires/Wheels	70	01-17-2013 05:23 PM
Anyone running Enkei RPF1's?	TonyBPD	Wheels & Tires	1	06-24-2010 05:08 PM
ENKEI - NOW AVAILABLE AT DRIVELINE l RPF1'S AND NT03'S - LOWEST PRICES GUARANTEED!!	DriveLineEric	Tires/Wheels	27	05-04-2010 06:12 PM
Enkei RPF1 - Does it Fit?	cotizi	Wheels & Tires	1	04-28-2010 08:11 PM