Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   Enkei RPF1's (http://www.the370z.com/wheels-tires/22680-enkei-rpf1s.html)

OMGWTFBBQ 08-17-2010 09:07 PM

Quote:

Originally Posted by cossie1600 (Post 680439)
My 9.5" wheel with 35 offset sticks past the fender slightly, it didn't rub with 265 race rubber.

Have you tried rolling the front fenders? Maybe trimming the fender lining and relocating the bumper tab? Just a suggestion. ;)

Red__Zed 08-17-2010 09:23 PM

Quote:

Originally Posted by Mike (Post 680661)
search for my posts in the wheel forum. I did try this wheel and it didn't work but it was over a year ago and I don't remember the specs. They are in my thread though. They may have new fitments since then also.

I think I found the thread you are talking about. They were pretty high offset. I also have a non-sport model, so no worries on clearing the Akebonos for me.

cossie1600 08-17-2010 09:49 PM

Quote:

Originally Posted by OMGWTFBBQ (Post 680668)
Have you tried rolling the front fenders? Maybe trimming the fender lining and relocating the bumper tab? Just a suggestion. ;)

It didn't rub when I autox last week, I have a set of 285 that i want to try out, I just don't want to waste money mounting and balancing tires unless I know it works.

Maxi 05-06-2012 10:16 AM

Quote:

Originally Posted by cossie1600 (Post 680771)
It didn't rub when I autox last week, I have a set of 285 that i want to try out, I just don't want to waste money mounting and balancing tires unless I know it works.

Cossie you have +35 18" RPF1:s?

Did these clear akebono brakes in front? I am just wondering that there are different experiences about fitments with these wheels..

FuszNissan 05-07-2012 11:26 AM

18x9+35 will not clear the Akebono's maybe 18x10+35

I would really suggest 18x9.5, 18x10.5 + 15 all around.

Read T 01-06-2013 03:36 PM

Can anyone confirm that 18x10 + 35 will clear Akebonos? I want to run same wheels/tires on all corners for the track so I can rotate.

littlejuanito 10-08-2017 09:35 AM

Quote:

Originally Posted by Read T (Post 2097089)
Can anyone confirm that 18x10 + 35 will clear Akebonos? I want to run same wheels/tires on all corners for the track so I can rotate.

.

Hotrodz 10-10-2017 11:28 PM

I run NT03 at +30 with no problem...I run a 15mm spacer on the rear. You can always add a spacer to get the clearance needed if the don't fit. Some run +15 square.


All times are GMT -5. The time now is 08:59 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2