The "Will it fit?" thread

[redondoaveb]

Originally Posted by OptionZero

Stock nismo is 9.5 +40
Look at the fitment:


There is a CAVERN of space, which is why the stock fronts are so terrible

I agree. I was hoping the 285 would take up some of that space but if there's going to be rubbing on the inside then I'll have to go another route as the wheels I was looking at only come in the +40 offset front and I don't want to run a spacer.

[Spooler]

Originally Posted by redondoaveb

I agree. I was hoping the 285 would take up some of that space but if there's going to be rubbing on the inside then I'll have to go another route as the wheels I was looking at only come in the +40 offset front and I don't want to run a spacer.

Custom order and get what you want. That is the only way to do without spacers properly.

[OptionZero]

grab one of those sets of used TE37's in the for sale section
forged
19x9.5 +22/19x10.2 +12 will fit easily
you can fit a 275 in front if you want

[redondoaveb]

Originally Posted by Spooler

Custom order and get what you want. That is the only way to do without spacers properly.

I was hoping to find off the shelf but I'll probably have to end up going custom.

[redondoaveb]

Originally Posted by OptionZero

grab one of those sets of used TE37's in the for sale section
forged
19x9.5 +22/19x10.2 +12 will fit easily
you can fit a 275 in front if you want

I might have to go with 19's as there are a lot more choices out there but I wanted to go with 20's as they would fill in the fender gap being that I have to stay close to stock ride height due to clearance issues in my driveway.

[OptionZero]

if you're using the wheel diameter to fill the wheel gap then you're doing it wrong

get some damn coilovers or air and do it right

From your mod list it is apparent that budget isn't an issue


Why would you dump that much money into your engine and go cheap on suspension?

There's plenty of setups that will achieve better fitment, useability, and performance if you're willing to shell out the money.

Good coilovers and air cups

[dominicpadawa]

Hi,

I made a Wheel calculator for cars. The car 370z is available but I don't have web hosting for it. Do you think this forum could host it, or someone on this forum have a website to host it ? Here is a preview image of the calculator for 370z.

If you want to try it, the FRS/BRZ calculator is already hosted here : https://www.ft86motorsports.com/wheelitfit

Thank you.

[Spooler]

Originally Posted by redondoaveb

I might have to go with 19's as there are a lot more choices out there but I wanted to go with 20's as they would fill in the fender gap being that I have to stay close to stock ride height due to clearance issues in my driveway.

Fix your driveway dude.... LMAO. I navigate 1/4 mile down a dirt road with a little red clay in the middle. I make it happen on coilovers and lowered.

[redondoaveb]

Originally Posted by Spooler

Fix your driveway dude.... LMAO. I navigate 1/4 mile down a dirt road with a little red clay in the middle. I make it happen on coilovers and lowered.

It's the transition going from the access road into my carport. I can literally get my car high centered if I don't back out at the right angle. Ask me how I know. Nothing I can do about it unless I move and that ain't happening.

[OptionZero]

coilovers + air cups

done

[redondoaveb]

Originally Posted by OptionZero

coilovers + air cups

done

Thought about that but damn, they're expensive.

[OptionZero]

You spent the money to put out 650 hp

Spend the money to put it to the ground

and get on your driveway

[redondoaveb]

Originally Posted by OptionZero

You spent the money to put out 650 hp

Spend the money to put it to the ground

and get on your driveway

As long as I stay close to stock ride height I can get in and out just fine and the reason for my post was to try to find a wheel/tire combination to help put it to the ground. Lowering my car isn't going to do that.

[OptionZero]

do you not know what a cup kit is?

[rvvhimiqbvl]

Quick question

I've been scouring through the forums and so far it seems like a greenlight, but, I'm currently running 245/45 in the front and 275/40 in the back on my base 18" wheels, and planning on lowering on ARK GT-S springs and running 20mm spacers in the front and 25mm in the back until I buy new wheels down the road. Will it fit?

Thanks in advance!