The "Will it fit?" thread

[db_370z]

Originally Posted by OptionZero

The rears are approximately the same size as what a Nismo rear is (+23)

The fronts are much more aggressive than stock, but well within what most aftermarket setups come in



Frankly, the +25 rear is extremely conservative



You can run the same tire sizes as a nismo

245/40/19

285/35/19

It willl literally fit the same as a factory nismo since those are the same width tire and wheel



the rears are sunk as hell. Get the +12 offset in 19x10.5

Thank you though it does give a better idea as what I’m looking a


Sent from my iPhone using Tapatalk

[db_370z]

Originally Posted by OptionZero

Or, he could just get the 19x10.5 +12 size which is available



Why run spacers when you can just buy a wheel in a better size



not like there's a price difference, and all the wheels are made to order anyways so its the same wait

Im going to consider the +12 ... I do want to avoid having to put spacers on


Sent from my iPhone using Tapatalk

[redondoaveb]

I'm looking at purchasing new wheels and tires for my new(ish) 2014 Nismo.The wheels I'm looking at are 20x9 +35 front and 20x12 +22 rear. I'll be installing 255's on the front and 325's on the rear and will be about a 1/2" lower than stock ride height. I'd like to have them flush with the wheel well lip. Will I have to run a spacer in the front and how will the rears be with the 325?

Edit: I also could go with a 20x10 +40 offset and 285 front. I wonder if that may be a better choice. I just don't want any poke.

[Rusty]

Originally Posted by redondoaveb

I'm looking at purchasing new wheels and tires for my new(ish) 2014 Nismo.The wheels I'm looking at are 20x9 +35 front and 20x12 +22 rear. I'll be installing 255's on the front and 325's on the rear and will be about a 1/2" lower than stock ride height. I'd like to have them flush with the wheel well lip. Will I have to run a spacer in the front and how will the rears be with the 325?

Edit: I also could go with a 20x10 +40 offset and 285 front. I wonder if that may be a better choice. I just don't want any poke.

This what I'm running. Front - 19x9.5, offset +25, Rear - 19x12, offset +28. Tire were 275/35-19 and 325/30-19. Now 285/35-19, and 345/30-19 on the same rims. That was at stock Nismo height and stock alignment. Now, I'm fully adjustable.

[redondoaveb]

Originally Posted by Rusty

This what I'm running. Front - 19x9.5, offset +25, Rear - 19x12, offset +28. Tire were 275/35-19 and 325/30-19. Now 285/35-19, and 345/30-19 on the same rims. That was at stock Nismo height and stock alignment. Now, I'm fully adjustable.

Yep, I was looking at your set up, I was wondering what your offsets were. I'm a little concerned if I go with the 285 on the front with a 10" +40 offset. I'm trying to stay away from tire poke.

[Spooler]

Originally Posted by redondoaveb

Yep, I was looking at your set up, I was wondering what your offsets were. I'm a little concerned if I go with the 285 on the front with a 10" +40 offset. I'm trying to stay away from tire poke.

Look at my setup. I run 19x10's up front. It's posted in this section somewhere.

[redondoaveb]

Originally Posted by Spooler

Look at my setup. I run 19x10's up front. It's posted in this section somewhere.

That's 190 pages to look through. It would be quicker if I just drove over and looked at your car. Unfortunately, both of our cars are in the shop.
I did look at an online offset calculator and since the fronts are the same offset and a half inch wider and I'm currently running a 265 , it showed about a half inch closer to the fender. I think they'll be about flush with the 285's.

[Spooler]

Originally Posted by redondoaveb

That's 190 pages to look through. It would be quicker if I just drove over and looked at your car. Unfortunately, both of our cars are in the shop.
I did look at an online offset calculator and since the fronts are the same offset and a half inch wider and I'm currently running a 265 , it showed about a half inch closer to the fender. I think they'll be about flush with the 285's.

Work for it a little. LOL....

Front: 19x10 +29
Rear: 19x11.5 +30.

Tire sizes:
Front: 285/35/19
Rear: 325/30/19

[Spooler]

Pics on Page 38.....

SSR Wheels Thread

[redondoaveb]

Originally Posted by Spooler

Work for it a little. LOL....

Front: 19x10 +29
Rear: 19x11.5 +30.

Tire sizes:
Front: 285/35/19
Rear: 325/30/19

I'm so old that if I tried looking through all those pages I'd forget what I was looking for before I found it.

[redondoaveb]

Originally Posted by Spooler

Pics on Page 38.....

SSR Wheels Thread

Since you're running a +29 offset in those pics I feel comfortable with the +40. It looks like you have a little poke in the front. Thanks!

[Spooler]

Originally Posted by redondoaveb

Since you're running a +29 offset in those pics I feel comfortable with the +40. It looks like you have a little poke in the front. Thanks!

Not any more. That was before the alignment. We set the camber to -1.4 front and they are perfect. I have a good bit of the SPL catalog. LOL

[redondoaveb]

Originally Posted by Spooler

Not any more. That was before the alignment. We set the camber to -1.4 front and they are perfect. I have a good bit of the SPL catalog. LOL

What was the front camber before?

[Spooler]

Originally Posted by redondoaveb

What was the front camber before?

It was -1.2 I think. I don't have my old alignment sheets here. They are in the car.

[NorthStyle]

Originally Posted by redondoaveb

Since you're running a +29 offset in those pics I feel comfortable with the +40. It looks like you have a little poke in the front. Thanks!

Do you ever plan on lowering your car?