The "Will it fit?" thread

[Gooch]

So, I’m an idiot, but..
Just got my order of TE37 Ultras in 19x9.5 +22 and 19x10.5 +12.. except the fronts came in at 19x10.5 +22.. look at my order and yup, it looks like I accidentally ordered 10.5 for the fronts. There was no option for ordering 9.5’s in that offset when I checked again today. Really bummed, I ordered these wheels 6 months ago. Anyway, am I screwed? Is there a reasonably big tire size I can fit on the fronts and and everything be good, even if I have to get SPL upper control arms? Thanks.

[NorthStyle]

With camber you can fit a 285/35 just fine.

[OptionZero]

Originally Posted by Gooch

So, I’m an idiot, but..
Just got my order of TE37 Ultras in 19x9.5 +22 and 19x10.5 +12.. except the fronts came in at 19x10.5 +22.. look at my order and yup, it looks like I accidentally ordered 10.5 for the fronts. There was no option for ordering 9.5’s in that offset when I checked again today. Really bummed, I ordered these wheels 6 months ago. Anyway, am I screwed? Is there a reasonably big tire size I can fit on the fronts and and everything be good, even if I have to get SPL upper control arms? Thanks.

um, you lucked into the CORRECT sizing, because 9.5 +22 is pretty conservative . . . and weaksauce

I fit a 275/30 on a 20x11 +15 in front at -3 camber. With the top of the tire tucking. It took some fender rolling and a pull, but thats at my sizing

Your sizing will fit just fine. with camber, like northstyle said, you can do 285 easily

get those SPL FUCAs and enjoy awesome looking front fitment

[jchammond]

Originally Posted by Gooch

So, I’m an idiot, but..
Just got my order of TE37 Ultras in 19x9.5 +22 and 19x10.5 +12.. except the fronts came in at 19x10.5 +22.. look at my order and yup, it looks like I accidentally ordered 10.5 for the fronts. There was no option for ordering 9.5’s in that offset when I checked again today. Really bummed, I ordered these wheels 6 months ago. Anyway, am I screwed? Is there a reasonably big tire size I can fit on the fronts and and everything be good, even if I have to get SPL upper control arms? Thanks.

If you wanted to go a bit shorter on the tires, 295/30,305/30/19 combo.
26.1" & 26.3" in PS4S's....nice even fit because of heavier front/rear ratio

[jchammond]

You may need only -2*or -2.5* up front & -2* rear,,,option to run a square setup if you track w/295/30's.
I'm way off, but sitting on (8) 295/30ZR19 PS4S's....1 is mounted on a 19x10 & has a slight bulge.

[OptionZero]

the lesson is that with a fender roller and SPL FUCAs you can fit anything in front

[Spooler]

Originally Posted by OptionZero

um, you lucked into the CORRECT sizing, because 9.5 +22 is pretty conservative . . . and weaksauce

I fit a 275/30 on a 20x11 +15 in front at -3 camber. With the top of the tire tucking. It took some fender rolling and a pull, but thats at my sizing

Your sizing will fit just fine. with camber, like northstyle said, you can do 285 easily

get those SPL FUCAs and enjoy awesome looking front fitment

I actually thought about going to this size on my fronts. A 285/35 will fit great. That is what I use on my 19x10's +29. My camber
is only at -1.4.

[Rusty]

Originally Posted by Spooler

I actually thought about going to this size on my fronts. A 285/35 will fit great. That is what I use on my 19x10's +29. My camber
is only at -1.4.

Have a 285/35-19 on 19x9.5 +25 with 2.2 camber.

[OptionZero]

Sorry for the poor lighting, but this is the best i can do to show my point



The fender is pulled a bit, but this is an aggressive wheel spec, 20x11 +15 that i mentioned repeatedly. I believe it was intended for the rear of a GTR, or maybe widebody front GTR. They would run a 285/35 on it, but that car is meant for a taller tire. A 275/30 is stretched on it, BUT it clears the fender without rubbing and it allows for the maximum level of concavity for the TE-37 Ultra (Face-4). Camber is -3

If you select 20x10.5 +24 on this wheel, you could get away without pulling and i bet you could get a 285/30 under there just fine.

If I were so inclined i could probably run a 20x11 +0 in the front with a more extreme stretched tire and something like -4 camber. Don't worry - i'm not gonna try it.

If i were to get another set of wheels, i'd probably go with a 3pc wheel and shoot for something like a 20x10 +0 and a 245/40 if brake clearance and lip fitments were suitable

[jchammond]

OZ knows about maximizing an aggressive wheel!
These are a couple pics of a 295/30 mounted on a 19x10,,,just a touch of bulge/should be perfect on a 10.5 & measurement is 26.15”



Sent from my iPhone using Tapatalk

[Gooch]

Thanks for all the great info. Now, I dont feel so dumb. But wish I had gotten bigger rears. As soon as I get off this island, pulling the trigger on a BP kit. Guess I’ll go order some SPL FUCAS. Good thing I didnt get my tires yet

[OptionZero]

Sell your fronts
Run the 10.5 +12 in front
Buy a pair of 20x11 +0 for the back
245/40/19 front and 285/30 rear

Win

[vq37818]

Anyone running the new OEM Sport Potenza S007 245/275 on a 19x9.5 and 19x11 set?

[OptionZero]

no reason why they wouldn't fit . . .

[Spooler]

Originally Posted by vq37818

Anyone running the new OEM Sport Potenza S007 245/275 on a 19x9.5 and 19x11 set?

Those are way to small. I would do at least 265/35/19 front and 305/30/19 rears on those size wheels.