The "Will it fit?" thread

Hotrodz · 10-26-2018, 12:45 AM

Quote:

Originally Posted by NorthStyle

Almost all of the 18x10.5 et15 setups I've seen run 275/40s

Agreed!

Sent from my SM-G965U using Tapatalk

shadow85 · 10-31-2018, 05:20 AM

Does anyone know if I can run 295/30R19 on the rears of my setup?

I have 19x10.5 +12 (+7mm spacer) wheel on the rear.
Eibach lowering springs

Does anybody know if that size tyre could fit?

jchammond · 10-31-2018, 06:05 AM

Quote:

Originally Posted by shadow85

Does anyone know if I can run 295/30R19 on the rears of my setup?

I have 19x10.5 +12 (+7mm spacer) wheel on the rear.

Does anybody know if that size tyre could fit?

They will fit & your camber will determine if they poke or not. Only a 26.1” diameter tyre,,,,pending mfg.

shadow85 · 10-31-2018, 07:43 AM

Quote:

Originally Posted by jchammond

They will fit & your camber will determine if they poke or not. Only a 26.1” diameter tyre,,,,pending mfg.

I forgot to mention i am on eibach lowering springs.

OptionZero · 10-31-2018, 12:59 PM

Absolutely fits

10.5 +5 extends 4 mm out more than my 12.0 +20

I fit 315’s with room to spare at around -2 camber

If u have adjustable arms in the rear its easy

CM370z · 11-02-2018, 06:12 PM

Quote:

Originally Posted by CM370z

Got another one for y'all:

FRONT: 19x10 +24 with 275/35
REAR: 19x11 +0 with 305/30

I am also putting on SPL front and rear camber arms but would not like to exceed 3 degrees of camber. Ride height is about 1.5" lower than stock. Will this fit?

Bumping this question

OptionZero · 11-02-2018, 06:30 PM

yes
folks run 19x9.5 +22 w/ 265 all day long, you're close enough

rears doable. Camber definitely required. Not sure if you'll need -3 though.
20x12 +20 rear is within 7mm and at around -2 camber i run 315/20

Rusty · 11-02-2018, 07:36 PM

Quote:

Originally Posted by OptionZero

yes
folks run 19x9.5 +22 w/ 265 all day long, you're close enough

rears doable. Camber definitely required. Not sure if you'll need -3 though.
20x12 +20 rear is within 7mm and at around -2 camber i run 315/20

I'm 285/35-19 on 19x9.5 +25, and 345/30-19 on 19x12 +28. Front camber -2.2, rear camber -1.8.

jchammond · 11-02-2018, 10:22 PM

Quote:

Originally Posted by CM370z

Bumping this question

I'd say yes & probably closer to -3* on rear & not quite as much up front.
"OZ"...What's your take?

OptionZero · 11-03-2018, 01:53 AM

The rears are way more aggressive than the fronts and I'm guessing it will be nearly 3 deg

Note also there is a range of flexibility depending on height and whether you have someone roll your fenders flat and pull them a bit even

AlWakRa · 11-03-2018, 11:31 AM

Quote:

Originally Posted by OptionZero

yes
folks run 19x9.5 +22 w/ 265 all day long, you're close enough

rears doable. Camber definitely required. Not sure if you'll need -3 though.
20x12 +20 rear is within 7mm and at around -2 camber i run 315/20

I ran 19x9.5+22 with 275/35/19 and -2.5 camber. It was fine, but needed to raise my front a little to not rub, left around, it was around 20mm between tire and fender. made it 30mm and this made the trick in street. I don't think it will be an issue with stock suspension.

Lvcky69 · 11-09-2018, 09:32 PM

what wheels are these?

KamiSpeed · 11-13-2018, 01:09 PM

Quote:

Originally Posted by Lvcky69

what wheels are these?

They look like the Vossen X Work VWS-1 wheels.

DarkJak · 11-21-2018, 03:17 PM

Currently running 275/40R18 Nexen SUR4G's on a 10.5x18 +22 square.
I am thinking about switching to the Yokohama A052 in 295/35R18 next year....
Now, I'm not too concerned about the rear, but will the fronts fit without rubbing?
Currently running about -2 degrees front camber and don't want to go more.

NorthStyle · 11-21-2018, 04:33 PM

Quote:

Originally Posted by DarkJak

Currently running 275/40R18 Nexen SUR4G's on a 10.5x18 +22 square.
I am thinking about switching to the Yokohama A052 in 295/35R18 next year....
Now, I'm not too concerned about the rear, but will the fronts fit without rubbing?
Currently running about -2 degrees front camber and don't want to go more.

Do you have pictures of how it currently sits? (I just want to see pictures because I'm inbetween running an 18x10.5 in a et12-15 with a 275/40 vs an 18x10.5 et30 with a 305/35)

10-31-2018, 05:20 AM	#2702 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 918 Drives: 15' 370Z A/T AMM TT Rep Power: 25	Does anyone know if I can run 295/30R19 on the rears of my setup? I have 19x10.5 +12 (+7mm spacer) wheel on the rear. Eibach lowering springs Does anybody know if that size tyre could fit? Last edited by shadow85; 10-31-2018 at 07:44 AM.

10-31-2018, 12:59 PM	#2705 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,228 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Absolutely fits 10.5 +5 extends 4 mm out more than my 12.0 +20 I fit 315’s with room to spare at around -2 camber If u have adjustable arms in the rear its easy __________________ OptionZero Build Thread

11-02-2018, 06:30 PM	#2707 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,228 Drives: 15 370Z Nismo 6MT Rep Power: 214100	yes folks run 19x9.5 +22 w/ 265 all day long, you're close enough rears doable. Camber definitely required. Not sure if you'll need -3 though. 20x12 +20 rear is within 7mm and at around -2 camber i run 315/20 jchammond likes this. __________________ OptionZero Build Thread

11-03-2018, 01:53 AM	#2710 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,228 Drives: 15 370Z Nismo 6MT Rep Power: 214100	The rears are way more aggressive than the fronts and I'm guessing it will be nearly 3 deg Note also there is a range of flexibility depending on height and whether you have someone roll your fenders flat and pull them a bit even __________________ OptionZero Build Thread

11-21-2018, 03:17 PM	#2714 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	Currently running 275/40R18 Nexen SUR4G's on a 10.5x18 +22 square. I am thinking about switching to the Yokohama A052 in 295/35R18 next year.... Now, I'm not too concerned about the rear, but will the fronts fit without rubbing? Currently running about -2 degrees front camber and don't want to go more. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 01:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-27-2010 12:35 AM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 02:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 10:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 10:30 AM