The "Will it fit?" thread

Rusty · 07-13-2018, 12:27 PM

Quote:

Originally Posted by Geoff-AU

That's a small tire. Try 345's.

Triggy · 07-21-2018, 03:33 AM

Going to get camber arms but wanted to know if anyone on here has ever ran 19x9.5et6 plus a 5mm spacer to clear the Akebono's up front and 19x10.5et-7 no spacers rear with Coilovers? Not too worried about the rear but the front has a good amount of poke without the coils on. Either if I do or don't necessarily need FUCAs I'll be putting the coils on in a few weeks and test fitting.

jchammond · 07-21-2018, 04:16 AM

That would be an "OptionZero" question,,,as the SPL Fuca's can really help dial camber/caster in on aggressive front wheel offsets.

Geoff-AU · 07-21-2018, 08:12 AM

Quote:

Originally Posted by Triggy

19x9.5et6 plus a 5mm spacer to clear the Akebono's up front

yikes. and here I am wishing I could run +33 in the front.

OptionZero · 07-21-2018, 03:52 PM

Quote:

Originally Posted by Triggy

Going to get camber arms but wanted to know if anyone on here has ever ran 19x9.5et6 plus a 5mm spacer to clear the Akebono's up front and 19x10.5et-7 no spacers rear with Coilovers? Not too worried about the rear but the front has a good amount of poke without the coils on. Either if I do or don't necessarily need FUCAs I'll be putting the coils on in a few weeks and test fitting.

Get the SPL FUCAs. You'll definitely need -2.5 to -3 camber
Plugged 9.5 +1 into the calculator. My 11 +15 sticks out just 5mm more, you're close enough.

Rears are pretty easy. Folks have done 11 +0 in back with -2. 10.5 -7 is within 1mm of that

Stock doesn't have much camber adjustment and no caster adjustment so pretty ugh anything aggressive is solved with the SPL fuca and a fender roll

OptionZero · 07-21-2018, 03:54 PM

Quote:

Originally Posted by Geoff-AU

yikes. and here I am wishing I could run +33 in the front.

Huh? You can run anything in front if you put in the effort

The track guys are running 18x11 +18 in front and 285s. I don't wanna hear crap about +33

jchammond · 07-21-2018, 05:28 PM

Quote:

Originally Posted by OptionZero

Huh? You can run anything in front if you put in the effort

The track guys are running 18x11 +18 in front and 285s. I don't wanna hear crap about +33

Yep; Hotrodz runs them on all 4’s w/315’s.

Rusty · 07-21-2018, 05:39 PM

Quote:

Originally Posted by OptionZero

Huh? You can run anything in front if you put in the effort

The track guys are running 18x11 +18 in front and 285s. I don't wanna hear crap about +33

19x9.5, +25, with 285/35-19 PS4S. Stock height, -2.2 camber, +6.5 caster.

Geoff-AU · 07-22-2018, 06:21 AM

Quote:

Originally Posted by OptionZero

Huh? You can run anything in front if you put in the effort

The track guys are running 18x11 +18 in front and 285s. I don't wanna hear crap about +33

You're missing the point. I *don't* want my wheels to poke out. Of course you can go lower offset, clear the brakes and leave all 4 corners hanging out to catch flies. I'm not interested in that look

jchammond · 07-22-2018, 06:51 AM

Quote:

Originally Posted by Geoff-AU

You're missing the point. I *don't* want my wheels to poke out. Of course you can go lower offset, clear the brakes and leave all 4 corners hanging out to catch flies. I'm not interested in that look

I’ll post a pic of a 19x10+38 w/285/35/19 & -0.8* stock neg camber/stock ride height.

jchammond · 07-22-2018, 06:57 AM

Quote:

Originally Posted by jchammond

I’ll post a pic of a 19x10+38 w/285/35/19 & -0.8* stock neg camber/stock ride height.

Car is not lowered & stock front suspension.
No rub & maybe a finger gap at tightest turning point w/7” backspace wheel.

Sent from my iPad using Tapatalk

Spooler · 07-22-2018, 01:32 PM

Quote:

Originally Posted by Geoff-AU

yikes. and here I am wishing I could run +33 in the front.

????? I am running 19x10's up front +29 and I only had to camber in to -1.4 to get them up under the fender. I am lowered also.

Geoff-AU · 07-25-2018, 08:34 AM

Quote:

Originally Posted by jchammond

I’ll post a pic of a 19x10+38 w/285/35/19 & -0.8* stock neg camber/stock ride height.

yep, that's on the limit for what I consider acceptable. cheers.

have decided to keep the stock wheels for now though.

Felors · 07-26-2018, 11:55 AM

Enkei RS05-RR Gunmetal

I am wanting to purchase the wheels above but before I did that, I wanted to make sure they would fit correctly with my stock setup (flush with the fenders, no rubbing or poking). I will be putting these on my 2016 370z. Completely stock on the suspension, brakes, and calipers.

Wheel spec:
8x9.5 +22 up front and a 18x10.5 +15 or +22 in the rear to give the car the wide stance. As for tires, I would go with a 245/40 for the front and a 275/40 for the rears.

Any help appreciated.

KamiSpeed · 07-26-2018, 12:16 PM

Quote:

Originally Posted by Felors

Enkei RS05-RR Gunmetal

I am wanting to purchase the wheels above but before I did that, I wanted to make sure they would fit correctly with my stock setup (flush with the fenders, no rubbing or poking). I will be putting these on my 2016 370z. Completely stock on the suspension, brakes, and calipers.

Wheel spec:
8x9.5 +22 up front and a 18x10.5 +15 or +22 in the rear to give the car the wide stance. As for tires, I would go with a 245/40 for the front and a 275/40 for the rears.

Any help appreciated.

Those will fit no problem at all. I have a sold a couple sets but with 18x11.0 +16 in the rear. So if you want to run those other sizes you can

. Though I would lean towards the +15 since that will be more flush than the +22 offset. Wheels are in stock, let me know if interested!

Here are two 370Zs running the 18x9.5 +22 / 18x11.0 +16 setup:

07-21-2018, 03:33 AM	#2627 (permalink)
Triggy Base Member Join Date: May 2018 Location: Quebec, Canada Posts: 22 Drives: 2019 370Z M6 Sport Rep Power: 7	Going to get camber arms but wanted to know if anyone on here has ever ran 19x9.5et6 plus a 5mm spacer to clear the Akebono's up front and 19x10.5et-7 no spacers rear with Coilovers? Not too worried about the rear but the front has a good amount of poke without the coils on. Either if I do or don't necessarily need FUCAs I'll be putting the coils on in a few weeks and test fitting. __________________ IG @trigger.tm

07-21-2018, 04:16 AM	#2628 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	That would be an "OptionZero" question,,,as the SPL Fuca's can really help dial camber/caster in on aggressive front wheel offsets. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 01:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-27-2010 12:35 AM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 02:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 10:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 10:30 AM

07-26-2018, 11:55 AM	#2639 (permalink)
Felors Base Member Join Date: Sep 2016 Location: Decatur, Tx Posts: 23 Drives: 16 Nissan 370z Rep Power: 9	Enkei RS05-RR Gunmetal I am wanting to purchase the wheels above but before I did that, I wanted to make sure they would fit correctly with my stock setup (flush with the fenders, no rubbing or poking). I will be putting these on my 2016 370z. Completely stock on the suspension, brakes, and calipers. Wheel spec: 8x9.5 +22 up front and a 18x10.5 +15 or +22 in the rear to give the car the wide stance. As for tires, I would go with a 245/40 for the front and a 275/40 for the rears. Any help appreciated.