Originally Posted by Geoff-AU That's a small tire. Try 345's.
|
|
LinkBack | Thread Tools | Display Modes |
07-13-2018, 12:27 PM | #2626 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,163
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
07-21-2018, 03:33 AM | #2627 (permalink) |
Base Member
Join Date: May 2018
Location: Quebec, Canada
Posts: 22
Drives: 2019 370Z M6 Sport
Rep Power: 7 |
Going to get camber arms but wanted to know if anyone on here has ever ran 19x9.5et6 plus a 5mm spacer to clear the Akebono's up front and 19x10.5et-7 no spacers rear with Coilovers? Not too worried about the rear but the front has a good amount of poke without the coils on. Either if I do or don't necessarily need FUCAs I'll be putting the coils on in a few weeks and test fitting.
__________________
IG @trigger.tm |
07-21-2018, 04:16 AM | #2628 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
That would be an "OptionZero" question,,,as the SPL Fuca's can really help dial camber/caster in on aggressive front wheel offsets.
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
07-21-2018, 03:52 PM | #2630 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,223
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Quote:
Plugged 9.5 +1 into the calculator. My 11 +15 sticks out just 5mm more, you're close enough. Rears are pretty easy. Folks have done 11 +0 in back with -2. 10.5 -7 is within 1mm of that Stock doesn't have much camber adjustment and no caster adjustment so pretty ugh anything aggressive is solved with the SPL fuca and a fender roll
__________________
OptionZero Build Thread |
07-21-2018, 03:54 PM | #2631 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,223
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Huh? You can run anything in front if you put in the effort The track guys are running 18x11 +18 in front and 285s. I don't wanna hear crap about +33
__________________
OptionZero Build Thread |
07-21-2018, 05:28 PM | #2632 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
Yep; Hotrodz runs them on all 4’s w/315’s.
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
07-21-2018, 05:39 PM | #2633 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,163
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
19x9.5, +25, with 285/35-19 PS4S. Stock height, -2.2 camber, +6.5 caster.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
07-22-2018, 06:21 AM | #2634 (permalink) |
Base Member
Join Date: Jan 2018
Location: Sydney, Australia
Posts: 61
Drives: 2018 370Z KAD 6MT
Rep Power: 3766 |
You're missing the point. I *don't* want my wheels to poke out. Of course you can go lower offset, clear the brakes and leave all 4 corners hanging out to catch flies. I'm not interested in that look
|
07-22-2018, 06:51 AM | #2635 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
I’ll post a pic of a 19x10+38 w/285/35/19 & -0.8* stock neg camber/stock ride height.
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
07-22-2018, 06:57 AM | #2636 (permalink) | |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
Quote:
Car is not lowered & stock front suspension. No rub & maybe a finger gap at tightest turning point w/7” backspace wheel. Sent from my iPad using Tapatalk
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
|
07-26-2018, 11:55 AM | #2639 (permalink) |
Base Member
Join Date: Sep 2016
Location: Decatur, Tx
Posts: 23
Drives: 16 Nissan 370z
Rep Power: 9 |
Enkei RS05-RR Gunmetal
I am wanting to purchase the wheels above but before I did that, I wanted to make sure they would fit correctly with my stock setup (flush with the fenders, no rubbing or poking). I will be putting these on my 2016 370z. Completely stock on the suspension, brakes, and calipers. Wheel spec: 8x9.5 +22 up front and a 18x10.5 +15 or +22 in the rear to give the car the wide stance. As for tires, I would go with a 245/40 for the front and a 275/40 for the rears. Any help appreciated. |
07-26-2018, 12:16 PM | #2640 (permalink) | |
A True Z Fanatic
|
Quote:
Here are two 370Zs running the 18x9.5 +22 / 18x11.0 +16 setup:
__________________
|
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official The370Z "Hot Girls with Hot cars" thread *NSFW* 01.01.09 | AK370Z | Gentleman's Club | 187 | 01-12-2011 01:24 AM |
why did the thread "Sharing a bad experience with my 370Z" get closed? | TheSnakeJake | Nissan 370Z General Discussions | 1 | 03-27-2010 12:35 AM |
Why there isn't a "Monterey Blue"370Z thread? | Devil Z | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 9 | 08-24-2009 02:55 PM |
Official "Guess the Stig's Time" Thread | ResIpsa | Nissan 370Z General Discussions | 11 | 07-27-2009 10:45 PM |
Official "Nissan 370Z spotted in Japan" Thread | AK370Z | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 120 | 05-01-2009 10:30 AM |