The "Will it fit?" thread

[OptionZero]

stop
no
don't
please
no
don't

Stick to ur OEM wheels

if u need to spend money on wheels for some reason, get some Nismo rears on all 4 corners, they'll won't look like garbage without needing spacers and they're always in the FS section

if the wheels ur looking at need a 20mm spacer . . . look for different wheels

There's a SEMA sale for Advan/Rays/Gram Lights, probably like 25% MSRP on certain packages. I know for a fact SpeedImageUSA has pallets of wheels coming in. Please call them and get wheels that . . . actually fit:
http://www.speedimageusa.com/
42285 Osgood Rd
Unit G
Fremont , CA. 94539
US
Phone: 510-573-1998

there will probably be some used TE37's floating popping up for sale with better fitment, seem to appear fairly often

as for a 315 on a 11 inch wheel . . . thats fine. i wouldn't call that a stretch. Hell thats more squared off than OEM Nismo rear wheel (285 on a 10.5), so i don't wanna hear any crap about that being stretched

EDIT:

Apparently there is also a Vossen x Work sale going on now too. Not my cup of tea, but here's their lineup:
http://wheels.vossenwheels.com/vossen-work/#the-wheel

personally, i'm looking at Advan GT for my next weeks. Like in a year or two rofl

[redondoaveb]

Originally Posted by OptionZero

stop
no
don't
please
no
don't

Stick to ur OEM wheels

if u need to spend money on wheels for some reason, get some Nismo rears on all 4 corners, they'll won't look like garbage without needing spacers and they're always in the FS section

if the wheels ur looking at need a 20mm spacer . . . look for different wheels

There's a SEMA sale for Advan/Rays/Gram Lights, probably like 25% MSRP on certain packages. I know for a fact SpeedImageUSA has pallets of wheels coming in. Please call them and get wheels that . . . actually fit:
Welcome to Speed Image USA -
42285 Osgood Rd
Unit G
Fremont , CA. 94539
US
Phone: 510-573-1998

there will probably be some used TE37's floating popping up for sale with better fitment, seem to appear fairly often

as for a 315 on a 11 inch wheel . . . thats fine. i wouldn't call that a stretch. Hell thats more squared off than OEM Nismo rear wheel (285 on a 10.5), so i don't wanna hear any crap about that being stretched

EDIT:

Apparently there is also a Vossen x Work sale going on now too. Not my cup of tea, but here's their lineup:
Vossen x Work - Vossen Wheels

personally, i'm looking at Advan GT for my next weeks. Like in a year or two rofl

Thanks for the input. I'm getting ready to go forced induction and besides upgrading my lsd I want to put some more meat on the rear. I don't think the stock 275's are going to last too long. There just doesn't seem to be a lot of choices out there for an 11 inch wheel with the proper offset for our cars. I would like to run at least a 305 on the rear.

[jchammond]

Originally Posted by redondoaveb

Thanks for the input. I'm getting ready to go forced induction and besides upgrading my lsd I want to put some more meat on the rear. I don't think the stock 275's are going to last too long. There just doesn't seem to be a lot of choices out there for an 11 inch wheel with the proper offset for our cars. I would like to run at least a 305 on the rear.

Going forced induction & wanting to put all the rubber possible down; 275/35,325/30’s w/no spacers & very minimal negative camber.
Those are good Straight away spec’d Wheels; if you’re gonna Track car & really gonna be hitting the curves hard-look at a more aggressive wheel....as these are 2mm more aggressive on offsets than oem Nismo Wheels.
Be prepared to roast tire’s w/forced induction & these Wheels would allow you to stand them upright,for even wear....
You would have that Antique look like myself & a few others.

[redondoaveb]

Originally Posted by jchammond

Going forced induction & wanting to put all the rubber possible down; 275/35,325/30’s w/no spacers & very minimal negative camber.
Those are good Straight away spec’d Wheels; if you’re gonna Track car & really gonna be hitting the curves hard-look at a more aggressive wheel....as these are 2mm more aggressive on offsets than oem Nismo Wheels.
Be prepared to roast tire’s w/forced induction & these Wheels would allow you to stand them upright,for even wear....
You would have that Antique look like myself & a few others.

When you say "those are good straight away spec'd wheels", what wheels are you talking about?

[redondoaveb]

I should add that with the Rohana wheels, the reason I was going to use spacers is because the front 9.5's only come in +38 offset which I understand won't clear the sport brake calipers, I believe I need a +28 to clear. I was going to use the 20mm spacers as I already have them for my stock wheels. I could go to an 8.5 front and it would have a +35 offset.
Edit: I was typing this and didn't see the above post before I posted this.
I'm looking for form and function. I personally don't want a stock nismo wheel and not looking to spend $4000.00 on a set of wheels.

[jchammond]

Originally Posted by redondoaveb

When you say "those are good straight away spec'd wheels", what wheels are you talking about?

Wheels that you can adjust your rear camber,to near what front camber specs are from factory.
I run-0.8* on all 4 corners & get absolutely even tread wear....I even handled the Dragon in NC, you just can’t lean on the curves as hard,as a car setup w/-2.0 or -3.0 Camber in the curves...but you won’t burn the inside of your tires off either.
It will look very close to mine w/those wheel specs.


Sent from my iPhone using Tapatalk