The "Will it fit?" thread

[DanDrescher]

Originally Posted by /Angelo350Z/

I never bothered to look into these details because theoretically, what one loses in power, one gains in traction and aesthetics. It depends on the rotational weight of your wheels and tires. All negligible IMO unless you're competing. If you do compete, you don't use your 20" wheels, do you? For what it's worth, I dyno'd my old 350Z on the OEM 18" wheels and tires first, then installed 19" TE37s with 255/285 tires. The numbers were identical.

Well put.. Thanks for the response

[Team Boost]

Has anyone ran volk g2's square set up 19x10.5 +30? I want to know if they will clear the sport brakes

[JerryDeluxe]

Will a 20x10 et 0 20x11 et -10 fit

[OptionZero]

YES

See here:
Jay’s 2009 Nissan 370Z Nismo Edition «

you'll need to relocate the front bumper tab so it doesn't rub and roll the fronts but other wise, DO IT

I did my 20x11 +15 and it fits great, just gotta go back on Monday and get that bumper tab cut

you'll want to throw your springs away and do it right with coilovers

run a 285/30/20 rear and a 255/35/20 front

[NRGz]

Currently have on stock A/S
18x8 +43 225/50
18x9 +15 245/45
Had summer ones on this*


Looking to get
18x9.5 +22? 30? 12?(too agressive?)
18x10.5 +15? 22? 0?
Wrapped in 245/45 and 275/40

09 touring (nonsport)
Any spacers needed upfront or rear?
Fenders rolled?
Slight aggressive is OK for either

[KamiSpeed]

Originally Posted by NRGz

Currently have on stock A/S
18x8 +43 225/50
18x9 +15 245/45
Had summer ones on this*


Looking to get
18x9.5 +22? 30? 12?(too agressive?)
18x10.5 +15? 22?
Wrapped in 245/45 and 275/40


Any spacers needed upfront or rear?
Fenders rolled?
Slight aggressive is OK for either

That is standard 370Z fitment. Not too aggressive. Do you have the Sport Model Akebonos? If so we will need to know the make/model of the wheel.

[NRGz]

Originally Posted by KamiSpeed

That is standard 370Z fitment. Not too aggressive. Do you have the Sport Model Akebonos? If so we will need to know the make/model of the wheel.

Hi, sorry to include more info

09 Touring (non sport) stock suspension, will edit in post, thanks!


Sent from my iPhone using Tapatalk

[KamiSpeed]

18x9.5 +22 Front | 18x10.5 +15 is a good fit. No rolling of fenders or anything. And since you have the standard brakes, most if not all wheels in those offsets will be fine. No spacers.

[shadow85]

I have pulled the trigger on Work S13P 19x9.5 +17 and 19x10.5 +12.

But my distributor rekons I will have to use spacers to clear the Akebonos with this fitment.

Anyways I will find out soon when they arrive. Still another 8 weeks wait apparantly...

[NRGz]

Originally Posted by KamiSpeed

18x9.5 +22 Front | 18x10.5 +15 is a good fit. No rolling of fenders or anything. And since you have the standard brakes, most if not all wheels in those offsets will be fine. No spacers.

Thanks for the info! Would a +22 +20 spacer look more aggressive/out the rear a little better?

Also how would these hold up on the BBK? What size recommendations should I decide for a BBK.

[Carbon]

Finally about to get wheels but want to make sure I'm not going too wide. Driving a 2016 Nissan 370Z nismo with stock 9.5 front and 10.5 back. Would 20x10 front 20x12 back be too much while trying to maintain a flush with the ground set up. Don't know much about offset

[OTW Z-Boy]

Originally Posted by shadow85

I have pulled the trigger on Work S13P 19x9.5 +17 and 19x10.5 +12.

But my distributor rekons I will have to use spacers to clear the Akebonos with this fitment.

Anyways I will find out soon when they arrive. Still another 8 weeks wait apparantly...

That +17 is going to be super tight to the calipers up front. Based on the 5 spoke convex design of the meisters you may get lucky. I'd have a set of 3mm/5mm spacers on hand just in case.

[jchammond]

Originally Posted by Carbon

Finally about to get wheels but want to make sure I'm not going too wide. Driving a 2016 Nissan 370Z nismo with stock 9.5 front and 10.5 back. Would 20x10 front 20x12 back be too much while trying to maintain a flush with the ground set up. Don't know much about offset

They will fit; As long as you know your camber settings & what size tires you're gonna be running.....on a 2" stagger wheel (10,12's) (9,11's) etc...offset will be very close to the same on front & rear wheels.
Post your alignment specs & we can help you with offsets

[OptionZero]

Did that guy not read my post right above him? 20x10 and 20x12 is easy. I'm doing 20x11 and 20x12

Offset, tire size and camber are key

Dude should tell us what suspension he's gonna be running

[KamiSpeed]

Originally Posted by NRGz

Thanks for the info! Would a +22 +20 spacer look more aggressive/out the rear a little better?

Also how would these hold up on the BBK? What size recommendations should I decide for a BBK.

You could do that yes and have an effective spec of 10.5 +2 in the rear.