The "Will it fit?" thread

[/Angelo350Z/]

Originally Posted by NorthStyle

The 18x10.5 RS05RR are also offered in +25 and +35 offsets...

18x10.5 +25 will stick out very similar to a 18x9.5 +13, which will work on a 350Z, but a bit aggressive IMO for a 370Z. Not sure if the +35 will clear Akebonos though.

[AlWakRa]

I don't know if this for wheel fitment or tires also, anyway, I have a little issue deciding on a new tires set for my new setup. I have ZE40 wheels with 19x9.5 +22 front and 19x10.5 +22 back. It looks like I will go for MPSS tires, however, after spending lot of time into researching tire sizes and looks and everything, I just lost it and don't know what to buy

So, to some extent I had decided on the following size
F: 255/40 R: 295/35
I thought of going 265/40 in front, but it will be a little taller (and the mentioned one has more identical diameters).

I thought of a different idea just now, even though, it looks less likely but I need to say it, go 285/35 square, but I think this will look a little strange on staggered wheels.

So knowing that I have stock suspension and I wouldn't go lower in the near future (as I got scrapes here and there already loool), my question is:

1) How would the front looks with 255? Stretched or Normal? I don't want stretch.

Just to confirm my choice before ordering.

[xTETOVABOYx]

Originally Posted by /Angelo350Z/

Here's my setup:





Work Emotion CR2P
Front: 19x9.5 +20
Rear: 19x11 +15 (with 5mm slip on spacers)

Bridgestone RE-11
Front: 265/35R19
Rear: 305/30R19tires

Suspension: Ark GT-S Springs

Spacers: 5mm Z1 slip on

It's difficult to provide a definitive answer because I don't know what size tires you intend on purchasing. But assuming we use the same brand and size tires, here's my input:

Enkei RS05RR

Front : 20X10 +35 - Too conservative. I would get a +25 or +28 offset for a 10" wide front wheel.
Rear : 20x11 +15 - I found mine to bee on the conservative side so I added 5mm spacers in the rear for a +10 offset.

or..

Front : 18x10.5 +15 ( Face R ) - Too aggressive. The wheels alone will stick past the fenders roughly .75".
Rear : 18x11 +16 ( Face R ) - Almost the same as the 20 fitment above.

Though not ideal, the 20s fit better. Good luck!

after doing some more research throughout the day i found a 370z with the 18" setup shown in this thread. I want mine to sit exactly like this one

Fly1 Motorsports Spec-V Rear Diffuser

I think he is running 295/40/18 tires, so with the right camber and coilover adjustment would mine sit exactly like this? Sorry when it comes to fitment on wheels i dont know much about it. Again i apologize if i broke any rules by putting that link to that thread in this reply / Asking to many questions that probably have been already answered. BTW the car looks great love the wheels and the color of your car.

[/Angelo350Z/]

Originally Posted by xTETOVABOYx

after doing some more research throughout the day i found a 370z with the 18" setup shown in this thread. I want mine to sit exactly like this one

Fly1 Motorsports Spec-V Rear Diffuser

I think he is running 295/40/18 tires, so with the right camber and coilover adjustment would mine sit exactly like this? Sorry when it comes to fitment on wheels i dont know much about it. Again i apologize if i broke any rules by putting that link to that thread in this reply / Asking to many questions that probably have been already answered. BTW the car looks great love the wheels and the color of your car.

Thanks. The Z in the link you posted looks great. Are you sure the front wheels are 18x10.5 +15? I tried to put 5mm spacers on my 19x9.5 +20 and the tires rubbed during heavy braking.

[NorthStyle]

Looks like his may rub to an extent as well. But, at the same time you can tell he's running a decent amount of camber. Love the look though

[/Angelo350Z/]

^^ It seems you can actually see where the fender rubs on the tire. I agree though, it looks great.

[NorthStyle]

So found pretty much most of the information on that setup:

18x10.5 +15
18x11 -6 (+16 w/ 20mm spacer)
295/40 square

[xTETOVABOYx]

Originally Posted by NorthStyle

So found pretty much most of the information on that setup:

18x10.5 +15
18x11 -6 (+16 w/ 20mm spacer)
295/40 square

Did not know about the spacer in the rear and if Angelo is correct about his rubbing issue with +15 after spacer on his car, then that must mean this guys had his fenders rolled and or pulled?

[Z Runner]

Will I be ok with this tire sizes? Looking to fill fenders but without rubbing.

Wheels
Advan GT
18 x 9.5 +22
18 x 11 + 12

Tires
Falken
255/40/18
295/40/18

I'm about .75" lower from stock height.

[KamiSpeed]

Originally Posted by Z Runner

Will I be ok with this tire sizes? Looking to fill fenders but without rubbing.

Wheels
Advan GT
18 x 9.5 +22
18 x 11 + 12

Tires
Falken
255/40/18
295/40/18

I'm about .75" lower from stock height.

Advan doesnt make an 18x11.0 +12 its a +15. And yes that will fit the 370Z just fine.

[Z Runner]

Originally Posted by KamiSpeed

Advan doesnt make an 18x11.0 +12 its a +15. And yes that will fit the 370Z just fine.

Thanks

[BlackZMamba]

What about: 19 x 9.5 +20 Front, 19 x 11 +18 Rear?
Currently lowered on BC racing coilovers.

[/Angelo350Z/]

Originally Posted by BlackZMamba

What about: 19 x 9.5 +20 Front, 19 x 11 +18 Rear?
Currently lowered on BC racing coilovers.

19x9.5 +20 is fine, but 19x11 +18 is going to be a bit sunk in. I have 19x11 +15 with 305 tires and I'm running 5mm slip on spacers.

[BigBen5.Oh]

Have some 20x11+15 avant gardes for sale with tires

[Ghost116]

U can run up to a 19x11 +5 I'm pretty sure. It think it was Moore speed that had it no rubbing.