The "Will it fit?" thread

[jchammond]

Back will be fine: should be about flush,,, but front is gonna poke out. 19x10+30's are closer to flush & the 265/35 is same diameter as the 305/30... & don't require a 10"wide wheel...scroll back a few pages & search a few other threads: I feel sure you would have to roll fenders for those... If you are running the same offset on front & rear,,,you need about 2" rim width difference to match up.


Sent from my iPhone using Tapatalk

[BrockDM1]

I'm looking to put a set of Volks on my 2015 Nismo and was wondering if this set up would work. Also since the 15 Nismo comes with the fender flares would i be able to keep them on or have to remove them.

Volk TE37SL
19x10.5+22 all round
Wanting to run staggered tires, maybe F: 265/35 and R: 285-295?

Unsure on tires so if you know the best fit that would be great. Looking to go meaty

PS: I am currently at stock height but might considering lowering if needed. Not looking to run excessive camber

Thanks guys

[jchammond]

Originally Posted by BrockDM1

I'm looking to put a set of Volks on my 2015 Nismo and was wondering if this set up would work. Also since the 15 Nismo comes with the fender flares would i be able to keep them on or have to remove them.

Volk TE37SL
19x10.5+22 all round
Wanting to run staggered tires, maybe F: 265/35 and R: 285-295?

Unsure on tires so if you know the best fit that would be great. Looking to go meaty

PS: I am currently at stock height but might considering lowering if needed. Not looking to run excessive camber

Thanks guys

Not sure about fender flares but: Your rear wheels will virtually be the same spec;just (.042"or 1.067mm) further out.
Front's will be (1.205"or 30.658mm) further out.
I've seen +22 9.5" wide wheels look flush-But what you have proposed will definitely stick out/unless i'm missing something.

[jchammond]

Originally Posted by BrockDM1

I'm looking to put a set of Volks on my 2015 Nismo and was wondering if this set up would work. Also since the 15 Nismo comes with the fender flares would i be able to keep them on or have to remove them.

Volk TE37SL
19x10.5+22 all round
Wanting to run staggered tires, maybe F: 265/35 and R: 285-295?

Unsure on tires so if you know the best fit that would be great. Looking to go meaty

PS: I am currently at stock height but might considering lowering if needed. Not looking to run excessive camber

Thanks guys

As far as going meaty on the tire; i've seen factory Nismo wheels running 275/35's & 325/30's...pending on Tire maker.

[jchammond]

Originally Posted by BrockDM1

I'm looking to put a set of Volks on my 2015 Nismo and was wondering if this set up would work. Also since the 15 Nismo comes with the fender flares would i be able to keep them on or have to remove them.

Volk TE37SL
19x10.5+22 all round
Wanting to run staggered tires, maybe F: 265/35 and R: 285-295?

Unsure on tires so if you know the best fit that would be great. Looking to go meaty

PS: I am currently at stock height but might considering lowering if needed. Not looking to run excessive camber

Thanks guys

ImageUploadedByTapatalk1446633088.244574.jpg
I'm sure owner of this Beauty won't mind;
But here's an example.
9.5"wide +20Front w/265's
12"wide +26 Rear w/325's
If he had 10" wide wheels on front: then his offset could be +26 also & only stick out .006" more;barely noticeable.
It's all in what YOU like.....& not everyone else.
Have a nice day!


Sent from my iPhone using Tapatalk

[jchammond]

Originally Posted by jchammond

Back will be fine: should be about flush,,, but front is gonna poke out. 19x10+30's are closer to flush & the 265/35 is same diameter as the 305/30... & don't require a 10"wide wheel...scroll back a few pages & search a few other threads: I feel sure you would have to roll fenders for those... If you are running the same offset on front & rear,,,you need about 2" rim width difference to match up.


Sent from my iPhone using Tapatalk

2" Difference in wheel width will put outer part of wheel in almost exact spot (in relationship to fenders) pending no crazy camber settings are used (within specs)

[BrockDM1]

Originally Posted by jchammond

Not sure about fender flares but: Your rear wheels will virtually be the same spec;just (.042"or 1.067mm) further out.
Front's will be (1.205"or 30.658mm) further out.
I've seen +22 9.5" wide wheels look flush-But what you have proposed will definitely stick out/unless i'm missing something.

Thanks man I appreciate it. After some digging I think i would definitely have to shave my fender flares to take them off completely. Might just end up going with a 9.5 front so its less of a worry.

[Mealbow]

Hi Guys, I am looking at getting the xxr 526 wheels sizes 20x9 +13 and 20x11 +11. Will I have any rubbing issues with these? I am lowered on eibach springs.

Thanks

[AntiVenom]

Originally Posted by Mealbow

Hi Guys, I am looking at getting the xxr 526 wheels sizes 20x9 +13 and 20x11 +11. Will I have any rubbing issues with these? I am lowered on eibach springs.

Thanks

Should be fine. It´s pretty common to run a 9.5" +20 without problems. your 9" +13 would be equivalent to a 9.5" +19. so, I doubt the 1mm difference will cause any rubbing on the fender.

[Mealbow]

Originally Posted by AntiVenom

Should be fine. It´s pretty common to run a 9.5" +20 without problems. your 9" +13 would be equivalent to a 9.5" +19. so, I doubt the 1mm difference will cause any rubbing on the fender.

Thanks for the quick response!

[jchammond]

Originally Posted by Mealbow

Hi Guys, I am looking at getting the xxr 526 wheels sizes 20x9 +13 and 20x11 +11. Will I have any rubbing issues with these? I am lowered on eibach springs.



Thanks

You been playing with the calculator; the grey Z (pictured on quote #1340) is right about where the outer part of your wheels will sit/ just be sure they are made to clear your brakes.


Sent from my iPhone using Tapatalk

[jchammond]

Originally Posted by jchammond

You been playing with the calculator; the grey Z (pictured on quote #1340) is right about where the outer part of your wheels will sit/ just be sure they are made to clear your brakes.


Sent from my iPhone using Tapatalk

doing a little further figuring & here are the results;
20x9+13 & 20x11+11,,,outer wheel will be .006" further out in front than RadRides Z pictured in quote #1340 & rear wheels will be .078" further out.
20x11+13 will be in exact same spot on outer lip as his 20x12+26
Remember; Camber will play a big role on tire selection.
Everyone has a different taste & you should be ok as long as you dont hang super fat tires on the front.
I've seen some wild looking set-up's & yours should be ok with factory camber specs.

[Blacklisted9]

I am wondering if something will fit. I have a 2012 370z with the OEM rays

I am looking at 4 Axis Hiros. 19x9.5 +40 so 4 of them all around. Will it fit and clear front breaks?

[jchammond]

Originally Posted by Blacklisted9

I am wondering if something will fit. I have a 2012 370z with the OEM rays

I am looking at 4 Axis Hiros. 19x9.5 +40 so 4 of them all around. Will it fit and clear front breaks?

Are you planning to use wheel-spacers to bring them closer to a flush fit?
if so; i'd say yes.

[jchammond]

Originally Posted by jchammond

Are you planning to use wheel-spacers to bring them closer to a flush fit?
if so; i'd say yes.

probably would need 15-20mm spacer in front (15more conservative)
and 30-40mm in rear,,,pending on how close to flush you want them.