The "Will it fit?" thread

LMBmikeZ · 02-19-2013, 08:44 PM

your good to go no rubbing

Jbwrecked · 03-01-2013, 11:13 PM

Can't find what I'm looking for so I was wondering how an 18x9.5 +15 would work out up front if I'm planning on going with a 275 up front. I know I may need to jump down to a 265 but dont really wanna go to a 255. I am stock height right now but will be on Swifts without a doubt soon. Stock camber as well. Any suggestions/ideas/pictures of this setup actually working?? Thanks guys!

daisuke149 · 03-01-2013, 11:29 PM

275 up front on a +15 = you'd need camber...
265 you'd need camber..

you need at minimum 25 offset. and then a tire that isnt as wide as other manufacturers or rounded. I ran a conti DW 275 on a + 27 offset oem camber and suspension could have done a 285 i think. but if you get like a michelin tire you'd prolly need a + 30 to run a 275.

Jbwrecked · 03-02-2013, 02:31 AM

Damn that's what I was afraid of.
I guess either ill look for a smaller tire for now or look into a different set of wheels. You think maybe a front fender pull would work? It'd need a bit of pull huh.

daisuke149 · 03-02-2013, 10:57 AM

Quote:

Originally Posted by Jbwrecked

Damn that's what I was afraid of.
I guess either ill look for a smaller tire for now or look into a different set of wheels. You think maybe a front fender pull would work? It'd need a bit of pull huh.

the front fender could be rolled and you could squeeze a 265 in there maybe... maybe. I dont think you'd have to pull.

Id rather spend the money on front camber arms than pull or roll tho.

asdfsammich · 03-02-2013, 11:58 AM

Hey guys. I'm dropped on swifts and thinking of going with Work Kiwami.

Front
9.5 +25
AD08 265/35

Rear
11 +18
AD08 305/30

I'm hoping it fits with no issues, flush but no poke, while continuing to be near +/- the outer range of stock camber specs.

I have a rear spc kit installed and will get the front arms if needed for more camber adjustability.

Will it fit?

Phone Tapatalk *nix ...

rAiN · 03-02-2013, 12:48 PM

19x10 +15
19x11 +15

what size tires to get with these offsets?

Jbwrecked · 03-02-2013, 01:48 PM

Quote:

Originally Posted by daisuke149

the front fender could be rolled and you could squeeze a 265 in there maybe... maybe. I dont think you'd have to pull.

Id rather spend the money on front camber arms than pull or roll tho.

Good point. Thanks for all the info. I might just stick to getting some +30 offset wheel, same sizes, and run spacers all around. That way I can run pretty much whatever I please. Thanks again!

chrischhorn · 03-03-2013, 12:15 AM

Quote:

Originally Posted by rAiN

19x10 +15
19x11 +15

what size tires to get with these offsets?

SUPER stretch on the front. 245/40 with a minimum of -3 degrees camber IF you are lucky. Rears you can do whatever you want.

anthony909 · 03-03-2013, 02:39 PM

Hey guys just ordered some meisters with the following offsets.

19.9.5 +17 F(Adding 5mm spacer putting me at +12)
19x11.0 +0 R

Curious on what tire size I should be running. I know camber is a must since I'm already lowered so I'm not worried about that part at all. Just not sure about the tire sizes..

Thanks!

cavemancan · 03-03-2013, 08:15 PM

Front: 275/35/19 - 26.6 diameter (its listed as a rear only tire but I'm not sure if that matters???)
Rear: 285/35/19 - 26.9 diameter

Similar diameter sizes as stock...within 0.3 inches...Just wider

Will these tires sizes fit on the stock rays?

BlKsUbYkId · 03-03-2013, 09:13 PM

Quote:

Originally Posted by anthony909

Hey guys just ordered some meisters with the following offsets.

19.9.5 +17 F(Adding 5mm spacer putting me at +12)
19x11.0 +0 R

Curious on what tire size I should be running. I know camber is a must since I'm already lowered so I'm not worried about that part at all. Just not sure about the tire sizes..

Thanks!

I have Meisters sitting in my room right now.

19x9.5 +17
19x11 +10

I test fitted them and the fronts clear the calipers....barely lOl
If anything I was planning on trying Z1s 2.5mm spacer

anthony909 · 03-04-2013, 12:06 AM

Quote:

Originally Posted by BlKsUbYkId

I have Meisters sitting in my room right now.

19x9.5 +17
19x11 +10

I test fitted them and the fronts clear the calipers....barely lOl
If anything I was planning on trying Z1s 2.5mm spacer

Have you tried the rears yet? I like having my car pretty slammed but not going to keep it that way if I'm going to have to really stretch the tires. I have the akebonos, do you have the base brakes? I was told ill need at least a 3mm spacer to clear them.

BlKsUbYkId · 03-04-2013, 12:25 AM

Quote:

Originally Posted by anthony909

Have you tried the rears yet? I like having my car pretty slammed but not going to keep it that way if I'm going to have to really stretch the tires. I have the akebonos, do you have the base brakes? I was told ill need at least a 3mm spacer to clear them.

I have a Nismo so no base brakes. The rears fit fine but stick out a little bit. Im lowered on Swifts but Ill be installing SPL rear camber arms & toe bolts soon.

Ni55anPat · 03-04-2013, 12:47 AM

Quote:

Originally Posted by anthony909

Hey guys just ordered some meisters with the following offsets.

19.9.5 +17 F(Adding 5mm spacer putting me at +12)
19x11.0 +0 R

Curious on what tire size I should be running. I know camber is a must since I'm already lowered so I'm not worried about that part at all. Just not sure about the tire sizes..

Thanks!

245/255 front
285-305 rear

02-19-2013, 08:44 PM	#556 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	your good to go no rubbing __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

03-01-2013, 11:13 PM	#557 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 13	Can't find what I'm looking for so I was wondering how an 18x9.5 +15 would work out up front if I'm planning on going with a 275 up front. I know I may need to jump down to a 265 but dont really wanna go to a 255. I am stock height right now but will be on Swifts without a doubt soon. Stock camber as well. Any suggestions/ideas/pictures of this setup actually working?? Thanks guys! __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

03-02-2013, 02:31 AM	#559 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 13	Damn that's what I was afraid of. I guess either ill look for a smaller tire for now or look into a different set of wheels. You think maybe a front fender pull would work? It'd need a bit of pull huh. __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

03-03-2013, 08:15 PM	#566 (permalink)
cavemancan Enthusiast Member Join Date: Mar 2012 Location: Miami Posts: 302 Drives: 09 370Z TourSport MT Rep Power: 249	Tire fitment on Stock Sport Rays Front: 275/35/19 - 26.6 diameter (its listed as a rear only tire but I'm not sure if that matters???) Rear: 285/35/19 - 26.9 diameter Similar diameter sizes as stock...within 0.3 inches...Just wider Will these tires sizes fit on the stock rays? __________________ Mazda Rx8 MT Titanium - SOLD! 2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling. Last edited by cavemancan; 03-03-2013 at 08:25 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 01:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-27-2010 12:35 AM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 02:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 10:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 10:30 AM

03-01-2013, 11:29 PM	#558 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	275 up front on a +15 = you'd need camber... 265 you'd need camber.. you need at minimum 25 offset. and then a tire that isnt as wide as other manufacturers or rounded. I ran a conti DW 275 on a + 27 offset oem camber and suspension could have done a 285 i think. but if you get like a michelin tire you'd prolly need a + 30 to run a 275.

03-02-2013, 11:58 AM	#561 (permalink)
asdfsammich Enthusiast Member Join Date: Dec 2011 Location: Southern California Posts: 456 Drives: 09 370Z SR MT Rep Power: 14	Hey guys. I'm dropped on swifts and thinking of going with Work Kiwami. Front 9.5 +25 AD08 265/35 Rear 11 +18 AD08 305/30 I'm hoping it fits with no issues, flush but no poke, while continuing to be near +/- the outer range of stock camber specs. I have a rear spc kit installed and will get the front arms if needed for more camber adjustability. Will it fit? Phone Tapatalk *nix ...

03-02-2013, 12:48 PM	#562 (permalink)
rAiN Track Member Join Date: Jan 2009 Location: va Posts: 721 Drives: 2012 370z mt Rep Power: 17	19x10 +15 19x11 +15 what size tires to get with these offsets?

03-03-2013, 02:39 PM	#565 (permalink)
anthony909 Base Member Join Date: Aug 2010 Location: CA Posts: 138 Drives: 2010 370zzzzz Rep Power: 15	Hey guys just ordered some meisters with the following offsets. 19.9.5 +17 F(Adding 5mm spacer putting me at +12) 19x11.0 +0 R Curious on what tire size I should be running. I know camber is a must since I'm already lowered so I'm not worried about that part at all. Just not sure about the tire sizes.. Thanks!