The "Will it fit?" thread

[W.O.W. 370Z]

Originally Posted by Csquared

I got a set of the Advan grade Rims off a member here that are
20x10 +20. All the rims are the same size.

The tire shop I am at refuses to put tires on my rims because he claims that they are not going to work. As in I'll be rubbing badly when I am am full lock. Also saying that I will have the rims poking out a lot. In the front.

Planning on going 275/30/20 in the front at stock height. Will I be fine? He said that if I insisted he will do it but i won't get any money back if it doesn't work.

Thanks in advance.

275/30/20 will fit. I had that on for 2 weeks before I went with 285.

I can full lock with 285 and no rub.


I willing be selling my 275/30/20 soon.

Sent from my SPH-D710 using Tapatalk

[delusional]

I was thinking of running a square setup. 18x10.5 +22 all around. would it fit? and what tires size should I be running? I'm currently not lowered but looking to throw on some eibachs or swifts in the near future. also what's our center bore size?

[Volk Z]

Originally Posted by delusional

I was thinking of running a square setup. 18x10.5 +22 all around. would it fit? and what tires size should I be running? I'm currently not lowered but looking to throw on some eibachs or swifts in the near future. also what's our center bore size?

You may be dissapointed with this look... The front will end up looking pretty nice and be very aggressive and the rear will be sunk in... To match that front i would say you would need a 10.5 +0...

THe distance from the rotor to out to be flush with the fender is different on the front and rear... You may want to get a 20 MM spacer for the rear.

You will see what i mean when you put these wheels on.

Tire sizes for a 10.5 depends on what you like
255- Super stretched
265- Stretched
275-285 Slightly stretched
295-305 Squared look

[delusional]

Originally Posted by Volk Z

You may be dissapointed with this look... The front will end up looking pretty nice and be very aggressive and the rear will be sunk in... To match that front i would say you would need a 10.5 +0...

THe distance from the rotor to out to be flush with the fender is different on the front and rear... You may want to get a 20 MM spacer for the rear.

You will see what i mean when you put these wheels on.

Tire sizes for a 10.5 depends on what you like
255- Super stretched
265- Stretched
275-285 Slightly stretched
295-305 Squared look

i see. i already have a set of 25mm spacers for my rear stock wheels. so i guess i can throw those on if they're too sunk. thanks for the help man

[Volk Z]

Originally Posted by delusional

i see. i already have a set of 25mm spacers for my rear stock wheels. so i guess i can throw those on if they're too sunk. thanks for the help man

Absolutely! The 25MM spacer would be perfect actually! And glad I could help... That's what the forums are for!

-Chad