Yes, They will fit just make sure the (offset) are within spec. Depending on the offsets It may or may not need spacers Keep the tire size to stock sizes
|
|
LinkBack | Thread Tools | Display Modes |
07-27-2015, 10:11 PM | #1201 (permalink) |
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,730
Drives: 🔰
Rep Power: 10 |
Yes,
They will fit just make sure the (offset) are within spec. Depending on the offsets It may or may not need spacers Keep the tire size to stock sizes IF you're not going to do anything fancy. Last edited by Trips; 07-27-2015 at 10:16 PM. |
07-27-2015, 10:17 PM | #1202 (permalink) |
Elite Member
Join Date: Jun 2012
Location: Calgary
Posts: 13,966
Drives: 14 PW 370Z S/T MT
Rep Power: 243722 |
Only if you want to go with a wider wheel that will stick out past outside the fenders. Camber wil tilt top of the wheel, thus fitting it back flush with the fender.Lowering the car wil also have a tendency of cambering the wheels in, so if you decide to lower the car, you might want to go with wider wheels or larger spacers.
__________________
Member of kenchan's "photoshopped mods" and "proper offsets" gang.
|
07-28-2015, 02:56 PM | #1203 (permalink) | |
Base Member
Join Date: Nov 2013
Location: Tampa
Posts: 207
Drives: '14 981 Cayman S
Rep Power: 11 |
Quote:
As stated above, camber kits can be used to increase negative camber when you have wide wheels that won't clear the fenders. They can also be used to decrease negative camber on lowered cars that will maintain toe/camber specs and increase tire life and straight line performance/grip. But again, you won't need them if you're just using a stock wheel and are not lowered. Cheers.
__________________
2014 Cayman S - Daily and Track - PDK | PSE | SC | PCM | H&R | HRE 2009 Ducati 848 - Weekend and Track - HMF | Ohlins | Microtec | Woodcraft | ASV 2010 370z Sport - SOLD - KWv3 | SPC | Stance Wheels | Z1 | Stillen | FI | Takeda | Uprev |
|
07-28-2015, 05:30 PM | #1204 (permalink) |
Track Member
Join Date: Nov 2014
Location: North Carolina
Posts: 695
Drives: 2011 KAD 6MT
Rep Power: 11 |
alright guys. i need a confirmation on something.
is 3% the maximum tire diameter difference FR to RR? Will say 3.1% throw a code? any speculation on whether or not an ECUtek tune can take care of the problem? |
07-28-2015, 10:01 PM | #1205 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,160
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
I'm running 275/35-19 PSS which is 26.6" and 345/30-19 PSS which is 27.2". With no issues.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
07-28-2015, 10:26 PM | #1206 (permalink) | |
Track Member
Join Date: Nov 2014
Location: North Carolina
Posts: 695
Drives: 2011 KAD 6MT
Rep Power: 11 |
Quote:
i have this hairbrained scheme about going 19"FR and 20"rear. I also want to run some serious rubber, but so far the closest i can come in terms of diameter, and keeping sidewall more or less the same, is 3.1% difference FR>RR (285/30r19 FR | 335/25r20 RR). my preferred tire selection would actually put it at about a 3.4% difference (285/30r19 FR | 345/25r20 RR), which i expect would definitely cause weirdness. obviously a wonky traction control system makes the idea a no-go. edit: there are other tire choices that come closer, but i was hoping to run some 325+ on the RR. however, i like the sidewalls/diameter sizes of some of the narrower options. Last edited by AntiVenom; 07-28-2015 at 10:44 PM. |
|
07-29-2015, 02:02 AM | #1207 (permalink) | |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
Quote:
Factory Diameter setup's are 325/30/19R & 275/35/19F ,The Michelin PSS tires are probably some of the widest tread ones. "Rusty" has that Bad-Azz look!!! i was thinking Pro-Street look 345/30/19R & 255/40/19F MPSS on 8.5 & 12" Forgelines. or 295/35/19F on 10"wide wheel. PS...."Rusty" also has unlimited funds!
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
|
07-29-2015, 07:03 AM | #1208 (permalink) | |
Track Member
Join Date: Nov 2014
Location: North Carolina
Posts: 695
Drives: 2011 KAD 6MT
Rep Power: 11 |
Quote:
Last night after spending some time with tire calculators and searching TireRack I also came across an alternative 275/35r19 FR | 305/30r20 on regular PSSs that would work better (2.2% diff FR>RR) and also fill the fender wells more (i.e. larger diameter than the wider ZPs mentioned). This option wouldn't create any problems with the TCS, but I lose width in the rear. It also has the advantage of being the same width as RS3 tires I will run as track tires. So the 275/305 setup is currently my top choice if i decide to go 19/20. I expect the narrower rear tire won't have a major impact on traction. So, the only thing I lose is my spot in the "370z Wide Tire Hall of Fame", next to Rusty. Last edited by AntiVenom; 07-29-2015 at 07:09 AM. |
|
07-30-2015, 03:46 AM | #1209 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
Would you want almost 1" difference in diameter of these tires; seems that it would mess up your abs. & everything else.ImageUploadedByTapatalk1438245969.204355.jpgImageUploadedByTapatalk1438245980.070120.jpg
Sent from my iPhone using Tapatalk
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
07-30-2015, 04:24 AM | #1210 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
Not sure the reasoning behind the 19/20 wheels... Corvettes are set up for it. With 1" shorter tires in front/ sidewall is the same.
If you want big- go 345/30/19R & 295/35/19F or if you like the 20's & handling; go 325/25/20R & 265/30/20F both 26.3"diameter. Won't affect sensors & potentially handle better than vette! Just my 2cents. Sent from my iPhone using Tapatalk
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
07-30-2015, 06:14 AM | #1211 (permalink) | |
Track Member
Join Date: Nov 2014
Location: North Carolina
Posts: 695
Drives: 2011 KAD 6MT
Rep Power: 11 |
Quote:
I´ve been thinking I would go the 20" route for a while and the 265/325 tire setup you mentioned is where I´d settled. The thing is, and this is all a matter of personal taste. 19s look perfect up front, but they look lost in the rear and vice versa for the 20s (perfect in the rear and huge in the front). Our cars have a relatively slim nose and a super tall rear, similar to the C7 vette (which is why I assume the Vette runs them in 19-20 configuration). IF I decide to go 19-20 I think I would be just fine with the 275-305 setup. the 275/35 on the front is real close to stock diameter and a little more meat in the back wouldn´t hurt anything. Sidewalls are really close in size. Either way, thanks again for throwing down your opinions/advice. |
|
07-30-2015, 01:17 PM | #1212 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
You right about that; what ever tickles your Fancy! If you like it/that's all that matters.
I said earlier that I like the pro-street look 345/30 & 255/40 on 19's Michelin PSS,8.5 & 12" wheels...27.1,2ish diameter. That's what I like & haven't seen another one yet. The Z06 look would be different with having the front low....I just don't have the Greenbax right now.ImageUploadedByTapatalk1438280226.972919.jpg ImageUploadedByTapatalk1438280239.159288.jpg Sent from my iPhone using Tapatalk
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
07-30-2015, 06:31 PM | #1213 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
Not sure if my pic is as low as vette, ImageUploadedByTapatalk1438299045.440380.jpg
Sent from my iPhone using Tapatalk
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
07-30-2015, 06:34 PM | #1214 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
I Like My ~Z~ Better!
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official The370Z "Hot Girls with Hot cars" thread *NSFW* 01.01.09 | AK370Z | Gentleman's Club | 187 | 01-12-2011 12:24 AM |
why did the thread "Sharing a bad experience with my 370Z" get closed? | TheSnakeJake | Nissan 370Z General Discussions | 1 | 03-26-2010 11:35 PM |
Why there isn't a "Monterey Blue"370Z thread? | Devil Z | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 9 | 08-24-2009 01:55 PM |
Official "Guess the Stig's Time" Thread | ResIpsa | Nissan 370Z General Discussions | 11 | 07-27-2009 09:45 PM |
Official "Nissan 370Z spotted in Japan" Thread | AK370Z | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 120 | 05-01-2009 09:30 AM |