The "Will it fit?" thread

[KaienZ34]

I'm lowered on swifts running MPSS 255/35/19--295/30/19 on Work GS4's 19x9.5+20--19x10.5+0 and pretty much stock camber. No problems at all but swifts are only 1" lower up front and 1.2" in the rear I believe. Your front wheels would retract by 6mm's from my front and the wheel to strut would have 6 more mm's of clearance from mine. The back setup should explain itself retract by 15mm's and have 15mm's less inner clearance but shouldn't be an issue. Now the lower you go the more camber you'll have to run, to clear or you will have to run narrower tires.

I don't have the best pics to show the clearance.

[370z209]

Was looking at a set of wheels someones selling. Wondering if this is an okay setup to run without rolling the fenders or negative camber in the rear. I currently have Swift springs installed.

- Front: 20x9.5 +15
- Rear: 20x11 +5
- Front Tire: 275/30
- Rear Tire: 315/35

Thanks

[LostSol]

Originally Posted by 370z209

Was looking at a set of wheels someones selling. Wondering if this is an okay setup to run without rolling the fenders or negative camber in the rear. I currently have Swift springs installed.

- Front: 20x9.5 +15
- Rear: 20x11 +5
- Front Tire: 275/30
- Rear Tire: 315/35

Thanks

Youll rub front and rear. Need a +25 or so to not rub in the front and +20 or +22 to not rub in the rear with out rolling or camber

Youll also need to do the 35 sidewall in front and 30 in rear.

[370z209]

Originally Posted by LostSol

Youll rub front and rear. Need a +25 or so to not rub in the front and +20 or +22 to not rub in the rear with out rolling or camber

Youll also need to do the 35 sidewall in front and 30 in rear.

Sorry, he had the wrong tire specs listed. Here's the right ones.

- Front: 20x9.5 +15
255/35/20

- Rear: 20x11 +5
305/25/20


Would these work okay?

[LostSol]

Originally Posted by 370z209

Sorry, he had the wrong tire specs listed. Here's the right ones.

- Front: 20x9.5 +15
255/35/20

- Rear: 20x11 +5
305/25/20


Would these work okay?

Front is close, +20 will fit for sure, +15 is tight

Rear will rub. Need +15 in the rear

[edub370]

wondering if my 19x9.5 +41mm tsw's on front can hold a 275/35/19 and not rub? any input would be appreciated

[LostSol]

Originally Posted by edub370

wondering if my 19x9.5 +41mm tsw's on front can hold a 275/35/19 and not rub? any input would be appreciated

They should fit the wheel fine, they wont rub on the fender, but the offset is so high they *might* rub on the suspension. Id suggest a 10mm or 15mm spacer, it will look better too

[Z34gallore]

Can anybody throw out a solid guess for the wheel specs on this Z?

[Dcocci]

Originally Posted by Z34gallore

Can anybody throw out a solid guess for the wheel specs on this Z?

perfect. perfect wheel specs.



Seriously though, an e-mail to SSR could probably answer your question.

[KamiSpeed]

Originally Posted by Z34gallore

Can anybody throw out a solid guess for the wheel specs on this Z?

Hey man, sorry I didnt see this earlier. I got those specs for you.

SSR Professor TF1

19x9.5 +12 (HP Disk) Front [2.7inch lip] | 19x11.0 +11 (SL Disk) [4.7inch lip]

[Array]

I'm sure somewhere in this thread this has been answered however I couldn't find it

Currently running base setup wheels looking into TSW's Interlagos that are
19 X10.5 27 Rear
19 X9.5 41 Front
Both 1 Inch larger and wider

I would be buying new tires as well.. I've heard that perhaps theres an issue with the offset and scraping the wheel well? I've never confirmed this just read in the forums.

[Dcocci]

Originally Posted by Array

I'm sure somewhere in this thread this has been answered however I couldn't find it

Currently running base setup wheels looking into TSW's Interlagos that are
19 X10.5 27 Rear
19 X9.5 41 Front
Both 1 Inch larger and wider

I would be buying new tires as well.. I've heard that perhaps theres an issue with the offset and scraping the wheel well? I've never confirmed this just read in the forums.

Those offsets would require spacers. The fronts especially would require BIG spacers.

[Array]

Originally Posted by Dcocci

Those offsets would require spacers. The fronts especially would require BIG spacers.

How much mm spacers would you think? Are we talking as much as 20+?

[Dcocci]

Originally Posted by Array

How much mm spacers would you think? Are we talking as much as 20+?

If it were me, I'd go with 10-15mm in the rear, and start with 20mm in the front. I'm running 18x10.5 with a 12 offset in the rear, and they fit very nice.

[Sly Nic]

I have spent a great deal of time looking for this answer on the Forum. Please be kind as I am such a newbie and have exhausted my patience with the search function.

I have a 2014 Roadster with sports package with stock 19 inch Rays. I want to fill in the wheel wells a bit more so I am planning on 20mm spacers all around.

My concern is the lug bolts - will I be able to use the stock bolts with the spacers or will I have to buy longer bolts? I am looking at HR spacers.

And finally, are the spacers simple to install? I am also an amateur at mechanics and an old fart.

That's it - I hope some one can advise me. Thanks.